Grip Roll & Twist

Tony Luczak
47 followers
1 Video View·Jan 13, 2026
Here is a quick video on defining what grip roll & twist are in Gears. I'm comparing my swing to another PGM student's swing to show you how I need to add more grip roll due to more twist in the face to get the club squared up at impact.
Thanks for watching!
Tony
KinetIQ.Golf
AI Generated·May contain errors
Hey golfers, been asked to clarify grip roll and twist.
I have my swing here in the gold club
and I have one of our students,
his swing is the blue club
and we're gonna take a look at the difference
what is grip roll and grip and twist.
Twist is the relationship between the club head rotation
relative to the grip.
So then we have three markers up here by the grip
and we have three markers,
obviously this club is not marked up,
on the head and that relationship of how much movement
is happening independent of each other.
So you may pick up a shaft and go,
man, that's pretty stiff.
But with the forces and torques that we apply to this club,
it's almost, you can almost think of it
as almost like a noodle in some cases.
So especially when we get into graphite,
longer clubs, mine are a good inch and three quarters long,
so now there's more torque being applied to the fibers
and there's definitely a lot more movement
which we'll see here.
Grip roll has to do with how much at the top of the swing,
how much the shaft or the grip is rotating
in degrees per second down to impact.
And the reason why I picked out these two swings,
one being mine I'm very familiar with,
and this is just to show you the difference
between face angle and why we need roll
in order to square this up.
So we're here at the top,
I'm gonna kind of bring this down about halfway
and we'll change perspective so we can see it
because from this angle,
we can't really tell what that face angle is,
but as soon as I swing this around,
we are gonna see some considerable difference
between face angle of his swing versus mine
and that club face is definitely in my case, more open.
There's more deflection or drooping of the shaft
and that center of mass of that club head
is gonna wanna go this way on the way down
because if I hold the club like that,
it's gonna go that way,
that's what gravity is pulling on along with the forces,
that's just where it's gonna go.
So I need, if you take a look at grip roll here,
I'm already at 691 degrees per second,
this individual's at 520,
so definitely I'm gonna need more roll
because one, that face is open,
also we take a look at the twist,
I mean, my face is there's negative 4.37 degrees,
that face is so different relative to what it was
at address and relative to my hands,
so I gotta apply more torque
in order to get that club face squared up.
So is that a good thing, bad thing?
That's what it is.
Now Gears is coming out with some OVO shafts,
looking forward to seeing those
and according to their research,
they're gonna see a much more consistent shaft
and so that would help improve delivery.
So the question is how much roll do I need coming down
and as we're moving into this,
coming into the square,
you can kind of see right about there,
definitely my face is open and it could be the path,
don't wanna get over crazy with too many variables here,
my path is 2.26 out to in
and his path is only one.
So they're pretty much spot on relatively,
I mean, one degree is not a whole lot of difference
in this.
So we're gonna say that these are coming into the ball
pretty consistently or consistent paths
but when we take a look at how much more open my face is
relative to this, so I need,
I'm already having 890 degrees per second
and he's at 646 in order to get this club face squared up
and that's what ends up happening
as we're coming into the ball
and we just see how much more,
my club, my grip has to back up a little bit
but that's okay because that's just how
I have to square that up
and I'm already at 906 degrees per second
relative to his 655.
So that's what grip roll is,
that's what twist is and on the gear system
and hopefully that kind of clarifies
what happens with that club head and the shaft
from the top of the backswing down through impact
and it's all the forces and torques we put on there
that the shaft then absorbs and everything else
and we have to be able to deal with that.
So should I play a stiffer shaft?
Well that means I'm gonna have to get a heavier shaft,
is that something I want with my length?
I've gone away from it so I'm kind of happy with the shafts,
we just realized that we have to,
I may have to tweak up my swing a little bit
if I want to reduce that amount of roll.
Some of the research according to Ping says
it really doesn't matter
and it's as long as you get it back to square
is what's important.
So thanks for watching,
hopefully that clarifies grip roll and twist
and stay tuned for some more videos
on ABCs, the golf swing and the four pillars.
Check out kinetic.golf and don't forget to subscribe
because I'm pumping a lot more of these out this year.
Good luck, talk to you later
and don't forget, hey, send me questions if you have them.
Don't mind, I love making sure
I'm getting the message across clearly.
Later.
