Dreamy Snowflakes: Watercolor Tutorial ❄️

Collect Watercolor Paintings
41 followers
TOOLS:
Brush: Giorgione G-R700 size 4
Paper: Bao Hong 300gsm Cold Pressed
Pencil: Pentel Sharplet
Masking Fluid: Marie's
COLOURS
Crimson Lake Holbein
Titanium Gold Ochre Schmincke
Jaune Brilliant Dark Schmincke
Ultramarine Finest Schmincke
Grey of Grey Holbein
Bleed Proof White Dr Ph Martin's
MUSIC:
ES_Faded Photos - Ruiqi Zhao
ES_The Rose by the Grave - Ruiqi Zhao
ES_The Snow Flakes - Ruiqi Zhao
#Arts #FineArts #watercolortutorial #watercolor #watercolorpainting
Hi everyone, this is Nia and today I'm going to paint this very simple group of snowflakes
and there isn't too much drawing here so I'm just going to go straight to the colours.
Firstly, I'm going to use Crimson Lake by Holbein, Titanium Gold Ochre by Schmincke,
Shun Brilliant Dark by Schmincke, Ultramarine Finest by Schmincke, Grey of Grey by Holbein,
and Blue Proof White by Dr. PH Martens.
This is very important, you'll definitely need masking fluid.
And I'm also going to use my silicone brush to apply the masking fluid so I have much
more control.
On the left is the reference image that I used.
I want to create something similar, or at least for the shape of the snowflake.
How I like to simplify it is by creating the base shape which is divided into six sections
and I want these lines to be spaced apart evenly.
I like to start by drawing one line first, angling it any way that you want, and then
finding the centre and you can add a cross in the middle of that line.
Once I have all the lines, then you can see if any areas are too far apart or too close
together, and if that's the case, I would just move it little by little and erase it
until I'm happy with the spacing.
I also want to make sure that the length is more or less the same, and for this, I like
to connect all the lines together on the outside, and if any of the triangles look longer or
bigger compared to the others, like the ones on the right here, I'm just going to erase
it and fix it until I get the correct length.
Once I'm done, I'm going to erase the lines that connect the sections together, then I'm
just going to go straight in with my masking fluid.
In terms of the design, I'm just going to use the masking fluid and draw it or paint
it on freehand, however, if this is something that you're not comfortable with, feel free
to sketch it out with pencil before putting on the masking fluid.
The next thing I'm going to add on are these little points in between each section.
For this one, you can see in the reference, it's filled in, so I'm also going to fill
it in with my masking fluid.
Next, I'm going to add the lines for the tip of each section, and for this, I like to imagine
the lines that I drew out earlier to connect the triangles, and I'm going to place the
lines until it almost reaches the end or the base of the triangles.
I realized that the lines in each section is actually longer than the reference image,
the ones in the reference are a bit closer together, and mine looks a bit more lanky.
It's a bit too late for me to fix it now, instead, I'm just going to make the lines
in each section a little bit thicker.
Since I have a bit more space, I decided to add more arrow lines at the bottom, but I
soon realized that they look better connected together, so it kind of adds on to the design.
I'm also going to thicken the end slightly.
You can see in the reference that there are smaller snowflakes, and I'm going to add these
as well.
I started by just drawing out the lines, but instead of adding the intricate design, I'm
just going to add rhombuses at the end of each section, then connect it all together
in the middle.
I'm just going to add a couple of these snowflakes for now.
After this, I'm going to add smaller snow bits, and these are just random blobs that
I'm going to place around in different sizes, they're either circles, ovals, or just any
random shape.
I'm just going to add a few, I know there is still a lot of space left, but I'm going
to add a second layer of masking fluid, so next I'm going to paint, but I do want to
make sure that every single part of the masking fluid is dry before painting anything over
it.
I like to start by dampening parts of the surface, this doesn't have to be even, some
parts are a bit wetter than others, and some parts I just added little water blobs.
In terms of the colour in the background, I like to add some purples, blues, but most
of the colours that I've picked are very soft and pastel.
This is completely up to you though, I just wanted to stare away from the usual blue swatches,
but if you like blue, or you have any other colours in mind, you can also go ahead and
play around with the colour combinations.
I'm just going to let you know my colour mixes in case you want to recreate the exact
same colour combination.
For the pinks, I use a mix of Crimson Lake with Shen Brilliant Dark and Ultramarine Finest.
For the light blues, I use Ultramarine Finest with Grey of Grey, and I like to also use
the Titanium Gold Ochre as little orange accents.
I want the feeling of this painting to be a bit more loose, which is why I didn't mask
off the sides of my paper, however, if you want a cleaner frame, you can just tape off
the sides before you start painting.
For the first layer, everything that I'm painting right now is quite watery, but that's okay
because we're going to paint over this later on after I mask off more areas with more snowflakes.
For now, I just want everything to be very nice and soft.
If there are any parts which look too dark, you can take off the excess paint while it's
still damp with tissue.
Then I'm going to let everything completely dry before adding on more snowflakes with
the masking fluid.
You want to make sure that it's bone dry because when you take off the masking fluid and you
place it while the paper is still a little bit damp, you can risk ripping off the paper.
You can see that my paper is completely dry because the colours have faded and it looks
very dry.
So now I'm going to start sketching out the areas where I want to place more smaller snowflakes.
You can play around with the sizes as well because playing with the size will also add
to the depth of this painting.
I'm fairly happy with the distribution, so next I'm going to mask off those areas.
Just like the previous smaller snowflakes that I did, I just made rhombuses on each
end of the lines and though some of the lines are longer, you can still play around with
the distance of where you place the rhombuses and the size of the rhombuses to make smaller
snowflakes or larger ones.
Just make sure that those lines you sketched out earlier are very light so when you paint
over it, the pencil marks won't really show through.
To make very small snowflakes, it's very difficult to get the exact shape, so instead of rhombuses,
I just add little dots and then connect them all together in the middle so it kind of looks
like a flower.
After creating all these snowflakes, I feel like I'm practiced enough to just add them
on freehand, so since there's still a little bit of space left, I'm going to add a few
more.
I'm just going to add one more here, then I'm going to wait for everything to dry before
painting it just like the first layer.
I'm going to add another thin layer on top because the base now is no longer white.
This way, whatever I put on top will be more vibrant compared to if I paint over something
that's completely white.
I'm just using the same colour mixes for now, but as it progresses, once I added the purple
mixture, I feel like the colour looks a little bit too muted and dark, whereas I want this
to look a bit more soft and vibrant.
So instead of using the mix of Crimson Lake, Ultramarine Finest, and Jaune Brilliant Dark
to create the purple-pink, I'm going to use Grey of Grey in place of the Jaune Brilliant
Dark to make the colour look a bit more vibrant.
And at the very end, I'm also going to add more pinks just from Crimson Lake and Grey
of Grey.
I'm just going to dot it in randomly along with the Titanium Bolt Ochre.
I'm feeling quite happy with the colours, and it does look fairly dark, but it will
be much lighter when it dries off.
After this, I'm going to let everything completely dry.
You want it to be bone dry, not any damp surfaces left on the paper because I'm going to be
taking off the masking fluid.
I'm just using my finger here to rub it off, and the masking fluid is fairly sticky.
This is why it's very important for the paper to be completely dry or else you'll risk ripping
off damp paper.
You see that for the snowflakes that we added on top of the painted base, the snowflakes
aren't white.
Instead, it has a really light purple tint, and this will really help with the depth of
the painting.
Before we move on to the next step, I'm going to make sure I take off every single bit of
the masking fluid, and basically you can leave it here.
However, I want to give this a little bit more depth.
This is optional, but here I like to soften the edges of some of the really white snowflakes.
I just smudge the edges with a clean damp brush, and I'm also going to add some form
to the main snowflake.
However, if you like the look of the silhouette already, you can stop here.
I'm just going to bring back up the reference image.
You can see that there's a bit more definition to the main snowflake, and since I feel like
the dominant color here is purple, that's the color that I've chosen to create this
definition.
It's completely up to you how far you want to add the details.
I personally want to add slightly finer ones, but I generally like to use quite light colors
so the details are still subtle and it doesn't take away from the rest of the composition.
I basically just try to make it look a little bit more three-dimensional.
Once I'm done adding the shadows of each section, I'm going to use bleed proof white to add
some frost textures outside of the main snowflake.
I'm just creating really, really thin lines.
You can also switch to a smaller brush for this, and I'm not going to do this completely
all around the snowflake.
You can if you'd like.
I'm just going to pick out some random sections.
Personally, I just want the edges to look a tiny bit frosty without having completely
solid lines for the snowflake.
I also want to add finer, more distant snow, and for this I'm just going to splatter a
bit more bleed proof white.
After adding some splatters, I was a bit too scared of splattering a bit too much without
much control, so I decided to add some more blobs or dots manually.
I'm just going to add a little bit more, and that's basically it.
It's actually very simple, but there's a lot of waiting in between, despite that I found
it really fun to paint around and play around with the masking fluid and negative shapes.
I hope you enjoyed watching the process.
Let me know in the comments if you give this a go with some variations.
And that's it!
Like usual, the list of tools as well as my social media links will be in the description
box.
Thank you so much for watching till the end, and I'll see you guys in the next one.
Bye!
