How to avoid squeaks on the violin

Suzuki Method
17 followers
Hi everyone, this is Joey again. I hope you're doing well.
Today I'm going to talk about how to play violin without sounding squeaky.
A lot of my students are wondering how to get rid of the squeaky sound.
So, I'll show you how to do it. It's very simple.
I'll be using today the violins and bows from topiaviolins.com.
Now, the reason the violin sometimes sounds squeaky is when the bow loses its proper position.
Meaning, when the bow goes...
But let me first play how it should sound.
This is a nice sound.
But when it sounds squeaky, often the bow is either too close to the bridge,
or too far away,
or too heavy.
Like that.
So, number one.
Keep the bow always away from the bridge.
Exactly in the middle between the fingerboard and the bridge.
Right here.
No matter what part of the bow.
Either it's near the frog, which is here.
Middle.
Or the tip.
Use your eyes and make sure it's always in the same spot.
It will sound beautifully.
Number two.
When you're playing, understand this part of the bow, which is the frog, is much heavier.
So if you do nothing, it will be just too heavy.
And as you get towards the tip, it will be too light.
So, what you have to do, you have to use your wrist.
Make sure you're moving your wrist up and down.
By doing that, you're making your bow light or heavy.
So, when you're near the frog, you lift up your wrist.
By doing that, think about it as a scooping weight off the bow.
Like that.
And then you will see your bow getting tilted slightly.
And as you get towards the middle, the wrist comes down.
As you get towards the tip, the wrist goes down.
By doing that, you're putting more weight.
So if you keep these two simple steps, you're going to make your violin sound beautiful and ringing.
Happy beautiful violin playing. Bye.
