Retouching Photoshop Tutorial for Beginners

Photoshop Effects World
12 followers
#photoshop, #photoshoptutorial, #channelselection, #adobephotoshop, #photoshoptip #photoshoptutorials #photoshopeffects #photoshoplearning #DigitalTexture #DesignTutorial#CreativeEffects#TextureDesign#PhotoshopTextures#mockup
Hello, in this video I'll be showing you how you can easily edit a photo in Photoshop from the website to the very end.
Simply like this video and don't forget to subscribe to this channel if at all you are interested in learning more about Photoshop and Photography in general.
So simply like this video and if at all you want to download the image to follow along, simply check the links in the description of this very video.
So in order to import the raw image in Photoshop we are simply going to right click and come to open with and select the Photoshop version that we want to use to edit the image.
And it's going to open up the camera raw filter and you can see this is the raw image.
So we want to first of all correct the lighting and contrast issues regarding this photo.
So we are going to come to the light option and simply take the highlights down of this image and do the same for the whites to have back information because the raw image was initially somehow pale.
And after doing that we are just going to come and add or take the blacks down to add contrast.
Then we are going to come and add more contrast under the contrast slider.
So after doing this we are simply going to come and open up the shadow slightly.
So I feel like the image is somehow a little bit pale so what I'll do, I'll just slightly take up the temperature slider just like that to warm up the image and add that kind of yellow tones in the skin tone.
So you can see the before, after, before, after.
So what we will do is simply come and hit open in order to open the image in Photoshop for us to do the next editing process.
So in Photoshop we are just going to be using frequency separation and remember frequency separation divides the image into the colors and the textures.
So just come to the background layer right here and simply duplicate it by pressing control J.
You can use command J on the keyboard and simply rename this to low and rename this to high.
Select the low frequency layer and turn off the high frequency layer.
Then simply come to filter, come to blur and come to Gaussian blur.
And this is the most important step when it comes to retaining skin details in your images.
So click on an area that has more skin details or skin textures and left click on the redder slider and drag up and release the left click button and continue dragging up.
So the trick here is we stop at the point whereby we are just starting to close out on the skin textures in the image.
So I just take this higher.
So at about 6 pixels that is when we are just starting to close out on the details in the skin.
So we are just going to come and click OK.
And now come to the high frequency layer and now activate it.
Then we are going to come right here to image, come to apply image and simply come.
The source is the name of the photo that we are editing.
Layer, select the low layer.
Channel has to be RGB.
Blending has to be add because this is a 16 bit image.
The scale is 2 and offset 0 and simply turn on the invert option.
And you will see the textures on the square layer.
So if I told you are editing an 8 bit image.
So if I told you have 8 right here.
This is what you have to do.
The source is the name of the image.
Layer, low layer, channel, RGB, blending, subtract.
The scale is 2, offset 128, opacity 100%.
Preserve transparency, mask and uncheck.
And simply don't turn on the invert option.
And you will see the textures on the square layer.
So since ours is a 16 bit image.
We shall revert the settings to 16 bit.
And click OK.
Change the blend mode from normal to linear light.
And after doing this select both layers and press CTRL G to put them in a group.
Open up the group by clicking on the drop down arrow.
Select the low frequency layer and turn off the high frequency layer.
Then you are going to come to the brushes.
Right click and select the mixer brush tool.
If at all the mixer brush tool is not displaying under the brushes.
You can locate the mixer brush tool down here.
Then after selecting the mixer brush tool.
Make sure the handle is set to 0%.
The mode is set to or clean brush is selected.
Then also make sure clean brush after each stroke is selected.
With a weight of 9%, load of 75.
Mix at 90, flow at 100%.
Make sure sample all layers is not checked.
And after doing this.
We are simply going to zoom in slightly the image.
And start mixing the tones in the skin.
So we are going to slightly increase on the size of the mixer brush tool.
By using the box bracket keys on the keyboard.
And how to mix, we basically mix colors that are looking.
Identical in a given area and we blend those colors together.
So for this area.
Left click and hold down.
And blend those tones in that area.
And after blending a given area.
Release the left click button and blend once again on a new area.
So depending on the colors that are existing in that given area.
That is what we are going to be doing.
And you have to recharge at a distance.
So I'm just going to be doing this over the rest of the skin.
And you always have to follow the direction of the skin.
And keep on playing around with different sizes of the mixer brush tool.
Depending on the area that you want to blend.
So to increase or reduce on the size of the mixer brush tool.
You can use the open and close box bracket keys on the keyboard.
So I'll just paint quickly just like that.
And I hope you can see the results.
And you have to follow the shape of the way the skin is flowing.
Or the direction of the skin.
So I hope you can see this.
But as we are doing this it kind of makes the image look plastic.
But we are going to be seeing the results later on as the video goes on.
So reduce on the size and blend each and every area that has skin in the image.
So I'll just do this quickly because I don't want this to take forever.
Or I don't want the tutorial to be a long one.
Because the retention of most of you or the attention span is somehow low.
So I'm just going to do this.
So you can see we are now blending all the areas that have skin.
So after blending these particular areas.
Just come and turn on the high frequency layer or turn on the texture layer.
And you can see the before, after, before, after.
The skin has been smoothened enough.
So before, after, before, after.
So if at all you want to perfect the areas that you may have missed out.
You can as well work with the texture layer turned on.
But remember when you are doing this make sure sample areas is not turned on.
So this is for identifying and painting the areas that you may have accidentally left out.
When you are trying to paint using our Mr. Brush tool.
And by just doing this you can see the skin has now been smoothened.
And you can see before, after, before, after.
So when you feel like you are not ok or fine with the results from the Mr. Brush tool.
You can as well incorporate the lasso tool technique.
So just come with the low frequency layer turned on.
And the high frequency layer also activated.
Simply come get the lasso tool.
Make sure new selection mode is activated right here.
The feathering is 20 pixels.
So type in 20.
And alias is selected.
Just come and select on the skin or select over the skin.
Just like that.
Keep away from the eyebrows or the hair.
Come to filter.
Blur and come to Gaussian blur.
And it is going to bring back the previous Gaussian blur radius that we had used initially before.
So we are going to multiply this radius by 3.
So 6 by 3 is 18.
So I will just delete 6 and type in 18.
And click ok.
So for whichever radius that you use for your frequency separation.
Multiply it by 3 and type in the value.
When it comes to this step.
So come back to filter.
Blur.
Gaussian blur.
So that is what we are going to be doing over the face.
So this technique is basically for the face area alone.
Because often times it is only the face that has more skin details or has more skin textures.
So this is what we have been able to do so far.
So I am just going to show you a technique for even out the skin.
And we are going to be done with the tutorial.
So this is the before.
After.
Before.
After.
So the image looks better.
So we are just going to come to the high frequency layer.
And simply activate it or select it.
Come and get the clone stamp tool.
Make sure the height is set to 0.
Mode.
The blend mode.
Right here the mode is set to normal.
Opacity 100%.
Flat 100%.
Align this check and sample is set to current layer.
Because we want to remove the blemishes that are part of the current selected layer.
Zoom in by using CTRL plus on the keyboard.
Or you can use CMD plus on the keyboard.
So to remove this pimple for example.
We measure the size of the clone stamp tool.
It is slightly bigger than the pimple or the blemish that we want to remove.
Then hold down the option key on the keyboard.
Alternate for windows.
And left click on a clean area near the pimple or the blemish.
And release the option key on the keyboard.
And simply left click once again over the pimple or over the blemish.
To replace the blemish with clean skin.
So if at all you are confused with that step.
You can simply rewind and you can understand how to do it better and efficiently.
So I will just remove all these imperfections of the skin.
So I am sorry if at all we are going really fast.
But I just hope you can understand everything.
So before, after, before, after.
So we are just going to close the frequency separation group.
And we are simply going to come and create a stamp visible layer.
So press SHIFT option CMD E on the keyboard for Mac.
For windows it is SHIFT ALT CTRL E on the keyboard.
To create a stamp visible layer.
Come and create a new empty layer in this case.
And come back to this stamp visible layer.
Come to select and simply come to subject.
And let Photoshop do its magic to select the subject.
Alternatively you can use the quick selection tool.
To simply select the subject.
So I am just going to get the quick selection tool.
And simply add or deselect this particular area.
So I am just going to try.
So don't mind if at all the selection is not active.
Or is not looking better.
Because you can always perfect that.
So when the subject is selected.
Come back to this empty layer.
And come to the brushes.
Right click and get the brush tool.
Make sure the hardness set all the way down to 0%.
And soft round brush is selected.
The mode is set to normal.
Opacity 100%.
Flat 100%.
So with the brush tool selected.
Zoom into the area of the skin.
And simply using the brush tool.
Simply hold down the option key on the keyboard.
And sample a color on the skin.
That you want the rest of her skin to look like.
So for this case I will just sample this part of the nose area.
I feel like that color is close to her skin tone.
And after sampling that color with the empty layer selected.
We are just going to zoom out.
And start painting over her skin.
But don't mind if at all this is looking odd.
Because just come to the mode.
And change it from normal to color.
And that is going to blend in better.
So we are just going to be painting.
Over her skin.
And it is going to show us.
That we are painting or creating.
An even or uniform kind of.
Skin color or skin tone.
So I am just going to be painting.
Just like that.
Reduce on the size.
And continue.
Just painting.
I hope you can see.
That now the skin looks better.
And it looks a little bit more on the uniform side.
Just going to be painting.
Just like that.
Keep away from the eyebrows.
The hair and some.
Particular areas.
That you don't want to paint in the first place.
So I am just going to be painting.
On these areas.
So after ensuring that I have painted.
On majority of the areas.
I am going to press CTRL D.
Or you can use CMD D.
To deselect active selection.
And perfect the image even better.
So.
For the areas that you may have accidentally painted in.
You can simply come.
And get the eraser tool right here.
And make sure.
Hardness set to 0%.
The mode is set to brush.
And with that done.
I am just going to come and erase.
The extras.
This time around you can zoom all the way in.
By using CTRL plus on the keyboard.
And I am just going to.
Erase these areas.
And as you can see.
Some areas were not painted.
With the colour for the skin.
So to quickly do that.
Press B on the keyboard.
To quickly select the brush tool.
And you can.
Paint once again.
And to erase press E on the keyboard.
For the eraser tool.
To rub away or erase.
As the colours.
I am just going to paint.
Just slightly there.
Don't mind if at all.
The transition is not looking nice.
CTRL minus or you can use CMD minus.
To zoom out.
We are going to come to her outfit right here.
And slightly try to.
Rectify that area.
CMD minus to zoom out.
So you can see this looks ok.
But it looks overdone.
So we are just going to come to opacity.
And reduce on the opacity.
So that it can look better.
Natural and a kind of realistic.
Kind of skin tone before.
After.
So in order to make it magical.
We are simply going to come right here.
And.
Create a levels adjustment layer.
Drag in the black slightly to add contrast.
And drag.
Up the whites.
You are going to come and create a hue and saturation adjustment layer.
Change its blend mode.
Rather leave it.
And come right here to where you see.
So.
We have created a hue and saturation adjustment layer.
And come to master.
Select the reds and simply come to the lightness.
And take down the lightness.
And this is going to slightly.
Try to.
Remove the orange tones from.
Her skin tone.
Before and after.
So right now the image looks better.
So what we want to do.
We are simply going to come.
To the adjustments page.
Select the color adjustment layer.
Come to blacks and simply come to the sands.
And slightly take them up slightly.
Just at that end.
Also.
Try to take up the blacks a little bit.
I think one is ok.
Before after.
It is just a subtle adjustment.
But it just gets the job done.
So let's do a little bit of eye whitening.
Or we can as well.
Add more contrast to the skin tone.
By simply creating a black and red adjustment layer.
Change the blend mode from.
Normal to multiply.
And reduce on the opacity.
To kind of add contrast.
To the subject's skin.
Then we are going to.
Whiten the eyes.
By creating a hue and saturation adjustment layer.
Come.
Take the saturation all the way down.
Until the image is desaturated.
Press CTRL I.
Or you can use CMD I on the keyboard to invert.
And come and get the brush tool.
Make sure you have black and red.
On these two color swatches.
To reset simply left click on these two.
Tiny swatches.
Then reduce on the size of the brush.
And make sure white is the foreground color.
Or the top color.
Or you can use the arrow key to switch.
Between black and white.
Then simply come.
With a white foreground color.
Paint in the eyes.
And you can use the same technique.
For teeth whitening.
So to erase the areas.
That you do not want to affect.
Switch the brush back to black.
And you can erase.
So right now we are done.
Editing and color grading.
This fairy image in Photoshop.
Next we just want to save or export this fairy image.
We are simply going to come to file.
Export.
And come to export as.
And it is going to open up the export as dialog box right here.
Format.
Make sure you select the format as JPEG.
White at 100% or to the maximum.
Which is 7.
The resample is set to bicubic sharper.
And make sure.
Embed color profile.
And also convert sRGB.
Have been checked.
And simply click on export.
And save the image wherever you want to save it.
So this is it for this video.
And if at all you have loved it.
Simply like this video.
And don't forget to subscribe.
If at all you have been watching.
And you are not yet subscribed to this channel.
Ronix from Ronix Photography.
Thank you for watching.
Don't forget to keep practicing.
And also keep creating.
