NHSN Digital Quality Measures Analysis

CDC
258 followers
Jan 7, 2026
Kristy Champion, educates on new digital quality measures process and data flow, data analysis reports, and how to navigate and access the data in NHSN
This video can also be viewed at
https://www.cdc.gov/wcms/video/low-res/nhsn/2026/236023602025NHSNATDigitalQualityMeasuresAnalysis.mp4
My name is Christy Champion and I'm a
part of the NHSN acute care analytics
team. Today I will be providing
information on the NHSN analysis for the
digital quality measures and providing a
sneak peek into the medication safety
components glycemic control module.
So let's first start out with the
objectives for today.
Um, by the end of the presentation, you
will be able to understand NHSN's new
digital quality measures and process and
data flow. Describe how the NHSN digital
measure reporting plan determines data
analysis reports
and navigate to and access the NHSN data
analysis reports for a preview of the
hypoglycemia hypoglycemia digital
quality measures.
To begin, I'll provide an overview of
the digital quality measures.
In alignment with the CDC's data
modernization initiative, NHSN is
developing fully automated digital
quality measures or DQM
based upon nationally recognized
standards. We also leverage measurement
science, rigorous benchmarking and risk
adjustment at the facility and patient
levels.
There are important benefits of DQM that
I want to highlight.
It reduces time for data collection
which minimizes reporting burden.
Provides patient level data for risk
adjustment and stratification.
It removes potential biases due to
different interpretations
which improves accuracy, validity, and
quality.
It also adjusts measures quickly in
response to changes and practices which
reflect speed and efficiency
improvements.
In order to harness these benefits, we
leverage policy, stakeholder engagement,
and evolving the technical components.
With advancing technology, we improve
data quality, optimize data aggregation,
and enable measurement alignment to
improve patient care.
Next, let's compare the manual or
semi-automated measures to the
improvements that digital quality
measures or DQM offer.
>> [snorts]
>> As you see on the left, with manual or
semi-automated measures, the data
standards are specific to the measure
and the organization from which they are
reported. Data are often pushed, which
requires NHSN to wait for the data from
the facility.
Data is typically aggregated. So often
only facility level risk adjustment is
available
and the measures are predetermined prior
to transmission to NHSN.
With digital quality measures, as you
can see on the right, data can be
applied to nationally recognized
standards across EHR vendors,
facilities, and agencies. Data can be
pulled allowing for realtime
surveillance fe feasibility.
And since the data are at patient level,
risk adjustment is possible and measures
can be adjusted after transmission to
NHSN.
Now, let's discuss some of the technical
aspects that make the magic happen.
NHSN's fire application leverages the
NHSN link to report DQM.
NHSN link is our open-source public
health application for fire reporting.
Fire stands for the fast healthcare
interoperability resources. It's an
international standard for healthcare
data exchange published by the health
level 7 international.
These standards include a standardsbased
approach to accessing a patient level
versus aggregated data. The EHR vendors,
hospitals, and government agencies are
are increasingly leveraging this
technology
and most EHRs have fire capability. But
the fire API or application programming
interface must be enabled.
NHSN link is a secure connection to the
facility's EHR endpoint which then pulls
the selected fire resources required for
the DQM calculation.
So now that we know a little bit about
fire and NHSN link, we'll move on to the
highle process flow from the facility to
NHSN.
NHSN link identifies patients of
interest from the facility's EHR via a
secure connection with the fire API.
Next, the NHSN link queries the EHR to
identify the data elements such as
medications and labs required for
measure calculations on the patients of
interest.
Then data is further validated and
analyzed and finally the NHSN
application runs algorithms to determine
if the patient meets denominator and
numerator criteria.
From here analytics are performed and
measure reports are made for NHSN users.
So before rolling out new technology
systems and analytics, piloting is an
important um step to ensure usability
and validity. So the NHSN collaborative
or NHSN collabs are part of this DQM
development process.
They are a small group of sites used to
pilot the measures. Sites must already
have the technical infrastructure in
place for piloting such as being fire
ready. This partnership allows NHSN to
test the feability and validity of the
new surveillance concepts.
Next, let's discuss um the quality
measures that are under development in
the NHSN.
Several DQMs will have modules located
within the patient safety component as
you can see in the center of your screen
including measures for hos or for
community onset adult sepsis mortality
respiratory pathogen surveillance
hospital onset bactermia and fungmia
healthc care facility onset antibiotic
treated ced deficil infection.
NHSN is also developing two new glycemic
control measures for medication related
hypoglycemia and hyperglycemia
which will be located in the new
medication safety component as you can
see in the upper right hand corner of
your screen. We will highlight
hypoglycemia later in this presentation.
So let's do a quick knowledge check and
be a little interactive here. Um, what
is one benefit of digital quality
measures?
Please answer in the chat.
So, let's go over the answer. The
question again is, what is one benefit
of many of the digital quality measures?
The answer, all of the following are
benefits of the digital quality
measures.
Reduce time for data collection.
provide patient level data for risk
adjustment and stratification.
Remove potential biases
and adjust measures quickly in response
to changes and practices.
Thank you so much for participating.
So now let's dive into the NHSN digital
quality measure reporting plan.
So the digital measure reporting plan
also known as the DMRP
um it plays an important role in the
collection and analysis of data for the
NHSN digital quality measures. This is
similar to existing monthly reporting
plans which a facility will comp and a
facility will complete a DMR DMRP as a
step in the process to begin reporting
data for the NHSN digital quality
measures. [clears throat] So what's the
purpose of this DMRP step?
It authorizes NHSN to query the
facilities fire server to collect EHR
data elements per the DQM protocol. So,
it's an agreement to comply with the DQM
reporting instructions, which includes
NHSN location codes and other
standardized value sets like RXORM or
LOINK.
It also selects the measures and
reporting period for the data analysis
reports to be available.
After interested facilities enroll in
reporting for one or more of the NHSN
digital quality measures, they must
complete this digital measure reporting
plan. The DMRP is found in both
medication safety and patient safety
components. To participate in DEQM, an
annual survey must be completed by March
1st of every year. After March 1st,
facilities will be prevented from
entering new DMRPs until the completion
of applicable surveys.
Okay, so we've heard about the steps,
but let's go over the order in which
they should be done. So first the
facility enrolls in NHSN and activates
the medication safety component or
future components that will be
available.
Second the facility completes the annual
hospital survey for the component of
interest such as medication safety
and third then the facility will add the
DMRP or digital measure reporting plan.
So first enroll then annual survey then
DMRP.
Let's talk about where you can find the
DMRP. You can easily find the DMRP by
navigating to reporting plan. Select
add. Select follow as you can see in the
center of your screen. Um for the
measure of interest in the future um for
medication safety you will most likely
see you know hypoglycemia measure
reporting and then hyperglycemia
reporting for patient safety as they're
developed you will see um an
everinccreasing list as well. So just to
note this example is from medication
safety component. The patient safety
component will have an additional
selection screen where the user must
select monthly reporting plan or DMRP.
Let's do another quick knowledge check.
What must facilities complete prior to
entering their digital measure reporting
plan? Please answer in the chat. A hint
is this should be be completed every
year before March 1st. Let's go over it.
um and thank you for your participation.
So the question is what must facilities
complete prior to entering their digital
measure reporting plan and the answer as
is across the board in the chat is the
NHSN annual hospital survey. Thank you
again.
So next we will discuss the the NHSN new
digital quality measures analysis
reports. Just what you've been waiting
for. In this section, we will highlight
the medication safety component glycemic
control module hypoglycemia measure.
So let's first talk about how that data
gets into the reports to begin with. So
using the glycemic control DQM as an
example and demonstrating the process
taking place within the CDC cloud, we
would consider encountering patient data
as you see if you follow from the left
side of your screen.
Medication data preferably using
medication administration but medication
request will be used if medication
administration is not available.
and then the blood glucose test data.
Moving on, we see that once again PHI
and PII are decoupled from the data at
this point and the data elements are
then linked to identify patient
denominator and qualifying glycemic
events during an impatient encounter.
Lastly, as you follow on the right, the
linked data elements are used to
generate analysis reports and are
provided to the facility through the
NHSN application. Again, reports may
include line listing, aggregate reports
or measure calculations.
So, I know this is getting really
exciting. So, let's talk about what will
be available in the module.
So the analysis reports will be
available in the NHSN application as the
new DQM are implemented and rolled out.
They will include metric calculations
for a facility as well as selected
supplemental reports such as line level
listing of events by location.
Additional analysis reports for instance
group user reports will be phased in.
Glycemic control hypoglycemia will be
the first DQM to be implemented.
All right, so let's get down to the
nitty-gritty details of some of these
metrics. So for this presentation, we'll
continue on with glycemic control
hypoglycemia spec um and highlight
calculations for the primary and
secondary metrics of the new TQM.
[snorts]
First we have the primary metric aligned
with the centers uh for Medicare and
Medicaid services CMS reporting
requirements. It calculates the number
of adult inpatient encounters where the
patient was administered at least one
hypoglycemic medication and suffered
harm of a severe hypoglycemic event over
the number of adult inpatient encounters
where at least one diabetic medication
was administered.
Moving on, this slide shares the
secondary metrics for the new glycemic
control module, hypoglycemia.
So for metric 2, it evaluates
hypoglycemia event days or an impatient
day with at least one documented
hypoglycemia event.
Metric three analyzes recurrent
hypoglycemia event days or medication
days with at least one documented
hypoglycemia event that has been
preceded by another inpatient day with a
hypoglycemia event within a 24-hour
period.
Please note that metric 2 and three will
be evaluated at the following blood
glucose thresholds less than 40 40 to 53
and 54 to 69 mg per deciliter
corresponding with severe moderate and
mild hypoglycemia events respectively.
Metric four calculates severe
hypoglycemia resolution time or the
median time between a hypoglycemia event
and the first blood glucose of normal
range or above or equal to 70 thereafter
for all patients.
Don't worry you don't need to remember
any of this. This will all be provided
um in the materials metrics and protocol
um that you will have access to.
So, if you prefer seeing um the
secondary metrics by formula, um we can
go over that really quick. And these are
the formulas that we use to calculate
those metrics. There are a lot of
nuances and details within them, but
we're just highlighting for today. For
metric 2, hypoglycemia event days is the
total number of hypoglycemia days per
month over the total number of
hypoglycemic medications per month.
Metric three, recurrent hypoglycemia
event days. It's the total number of
recurrent hypoglycemia days per month
over the total number of hypoglycemic
medication days per month. And metric
four is severe hypoglycemia resolution
in minutes.
It is um the median in minutes
immediately following the the resolution
of the hypoglycemia event.
Moving on from the metrics themselves,
let's talk about what to expect in the
reports during the rollout phases.
During the first phase, as you can see
on the left, there will be line lists.
For example, these line lists can
include all inpatient encounters with at
least one hypoglycemic medication and
severe hypoglycemia encounters for
adults.
This can also include include a rate
table such as severe hypoglycemic
encounters for adults which is metric
one.
Separate reports will be generated using
medication administration or medication
request data depending on which is
submitted by the facility.
During the second phase, as you can see
on the right, there will be additional
lineless frequency tables and rate
tables including stratified rate table
reports for metric 1 and the calculation
of all secondary metrics.
So now let's look at where the reports
will be available within the user
interface. Looking at this illustration
to find the analysis reports you go to
analysis and then click reports. Here
you will then see a tree view of the
reports for digital quality measures and
modules. Continuing with with the
hypoglycemia example.
Note that you will see both medication
request and medication administration
options, but they will be populated or
blank depending on which your depending
on which your facility submits.
So if your facility is using medication
request data, you will only actually see
data within the med medication request
line list or rate tables and then you
will not see it with the medication
administration and the vice versa is
true. If you're submit a facility
submits medication administration, you
won't see medication request
um data I should say. The filtering and
modifying screens will be very similar
to that of patient safety but refreshed
and modernized.
Now we can look at some examples of
reports you can expect.
This is an example of the hypoglycemia
primary metric line listing report. You
will have the ability to sort, filter
and set time periods. This will be
similar to other modules.
So, as you see at the top right, um
these have default default sorting um
schemes and you can adjust those. You
can do by page time periods and there
are several different filters that
you'll be able to use.
Um along the blue um table there will be
you can see some of the um variables
that will be available.
Okay, moving on. We have an example of a
rate table for se severe hypoglycemia
encounters. You have the ability to set
the date ranges, filters and group by.
Again, there will be defaults, but you
can change those. And these are some of
the variables that um you will be able
to see, such as the org ID, the summary
by year and month, severe hypoglycemia
encounters number and calculations, the
hypoglycemic medication encounters, and
the percent of hypoglycemia
medication encounters with severe
hypoglycemia.
So that you want to know when this is
going to be available. The NHSN glycemic
control module is expected to be open to
early adopters next year 2026.
If your facility is interested in
participating as an early adopter, you
can express interest at the link in this
slide. Of note, your facility must be
able to report measures via fire.
Participation is contingent on NHSN
release schedules and meeting technology
requirements and is not guaranteed.
During this presentation, we have
reviewed
how data flows through the NHSN DQM
pipeline, the purpose of the NHSN
digital quality measure reporting plan,
and the location of the NHSN data
analysis reports when available.
Thank you so much for joining me today
for this presentation and please post
questions in the annual training
community if we aren't able to address
them in the Q&A today. Um you can also
submit questions to the NHSN help desk
um to the service desk. Um and if you do
not have a SAMS login, you can do NHSN
cdc.gov
include annual training 2025 in the
subject line.
Thank you.
Oh, can you hear me?
