What are my favorite easy plants for a low tech planted aquarium? Follow along and find out! 🌿💦
There are so many different plants to pick from with different care levels and requirements. These 3 & a half plants are my top picks for a few reasons. They are available at most stores, are easy to care for, grow quickly and most importantly, they look gorgeous!
Now that you know what some easy plants are to take care of, what goes into setting up an easy planted aquarium? Check out one of the videos below and set up your own planted tank! ⬇️
• The ultimate cheap nano planted tank🍀💦 - A...
• Aquascaping tutorial low tech planted tank
• Low tech nature aquarium tutorial: Simple ...
Cleaning is a really important part of maintaining a healthy and clean looking planted tank. Learn how to stay on top of it! ⬇️
• How to do water changes in planted aquarium
Chapters📖 0:00 - Intro 0:33 - Vallisneria 4:06 - Star grass 6:36 - Pearl weed 8:20 - Duck weed 9:41 - Routine tasks to keep tank clean
Plant list - I think I got everything. Let me know if I missed one! Vallisneria sp. Hygrophilla angustifolia rubra Hygrophilla pinnatifida Hemianthus (Micranthemum) micranthemoides - pearl weed Staurogyne repens Heteranthera zosterifolia - star grass Nymphaea zenkeri - red tiger lotus, not doing super well in this tank
Thanks so much for watching! Drop a comment if you enjoyed the video or if you have questions!
Hey what up fish friends, Michael here with Fresh Flow Aquatics. I'll be going
over three and a half must-have plants for low-tech planted tanks.
These plants are all easy to find, do really well in a variety of conditions,
and fill in quickly. Plus they cover your entire tank from foreground to mid-ground
and background areas. The last half plant fills in a little too quickly,
which is why some people don't like it, and the reason I've put it in as a half plant.
The first plant, Valisneria, is a genus of aquatic plants that commonly goes by eelgrass.
This is a long-time favorite of the planted aquarium hobby and is popular for a few reasons.
First of all, there's so many different types and they're all known to be really hardy and
adaptable to various water parameters. Because they naturally occur in places with high flow,
they have extensive root systems and that keeps them from getting uprooted.
They send long, mostly flat and slender leaves to the water's surface. There are some exceptions
like Valisneria nana, which produce round grass-like blades. This plant is found throughout
the world. Even the smallest Valisneria plant will grow about 8 inches or 20 centimeters.
Most species will grow so tall that their leaves will end up billowing along the water's surface.
Large species like Valisneria gigantea will grow to 20 inches or 50 centimeters long.
They can grow in most lighting conditions, though I prefer moderate. It helps to keep them stay
healthy and vibrant, but limits extremely rapid growth that you'd see with a high lighting tank.
It can grow in virtually any substrate, sand, soil, or gravel. If you're serious about growing
plants though, I'd give it some soil. Either aquarium soil or garden soil capped with sand.
You don't really need to add much liquid fertilizer to tanks with Val,
but it's a good idea to add root tabs since they're such heavy root feeders. There's no
need for CO2. Val actually becomes a little too weedy in my opinion when you give it too much
and it can really take over a tank. Valisneria does not like low pH,
but still does well in a high range of conditions. It does best around 5 to 15 in terms of general
hardness, but can still survive outside that range. It lives in cold to warm conditions,
and likes moderate to high flow. Some things to note are that Val doesn't do well with big doses
of glutaraldehyde, the active ingredient in most algaecides or biologically available sources of
carbon for plants like Excel. This tank gets one quarter of the recommended Excel dose,
and the Val is clearly happy, but too much could cause it to melt away.
To trim, you could use shears, but that takes too long for me, so I just come along the top
and use my hands to trim a dozen plants in one go. You need to kind of stabilize the bottom
where you're gripping the plant and then pinch the top off if that makes sense. I'm not just
pulling, otherwise you could uproot the plants. Usually the blades that get trimmed stop growing,
so you may need to eventually clip them at the base because they're sometimes more prone to
algae like blackbeard than growing blades are. To propagate it, all you do is take these little
side shooters, rip off the connector bits, and plant them elsewhere, or you could just let them
grow where they sprout anyways. The reason that they send side shoots like this is because they
that allows the baby plants time to set roots instead of getting washed away in the current.
Besides the fact that it's such a gorgeous and easy plant to take care of, I love getting lost
in time watching it sway in the current, especially along the top of the aquarium.
It's also one of the best plants you can get to provide cover for fish and promote breeding. It's
definitely a must-have for any low-tech planted tank. Heteranthera zosterifolia. This plant is
commonly known as star grass and is truly a gorgeous plant. The leaves are papery thin and
soft to the touch with light green top and almost a black hue along the edges on the underside,
which is easy to mistake for blackbeard algae. It grows in regions with slow-moving or stagnant
water. If you've watched the BBC's Green Planet, there was an episode about aquatic plants and
Heteranthera zosterifolia can be seen growing just like this with a small base truncating up
towards the top. The other way you could grow it is just to have a number of plants or a number
of stems with a limited amount of stems or heads on each stem. You could also even use this planting
method with really short stems to grow a carpet of star grass, though that's a little harder to
pull off in a low-tech tank. This plant is from the Amazon basin, specifically the marshes of Brazil.
It can grow up to a foot tall or 30 centimeters, but it can also be grown as a carpet. Even though
it'll live in most lighting conditions, moderate to high is better for vibrant growth. You should
give it some aquarium soil or regular garden soil capped with sand. It does well with root tabs and
liquid fertilizer, though this tank's water column is kept pretty lean and it still does well. It
doesn't need CO2 to grow like this, but if you want it to grow crazy dense and carpeting, then you
probably would want to add CO2. It does well in a wide range of pH 5 to 8, as well as general
hardness. It can do well with pretty much whatever you throw at it. It'll live in a wide range of
temperatures 50 to 80 Fahrenheit or 10 to 30 Celsius. It does well with moderate to slow flow.
In high flow, it can grow horizontally and leggy, and it just doesn't look as good. To propagate this
plant, all you got to do is pluck or trim some heads and replant them in the soil. It's a pretty
low maintenance plant in this tank, but in high-tech tanks, it grows super fast. It's almost a bit of a
nuisance having to trim it back on a weekly to bi-weekly basis. I like to use this plant as a
mid-ground to background plant, but like I said, you could even grow it as a carpet if you wanted.
Pearlweed, also known as Micranthemum micranthemoides, is one of the hardiest
little plants you'll come across. It's really perfect for someone looking to set up their
first planted aquarium. Unlike a lot of other stem plants, this one is really easy to keep as a
foreground plant. It's bright green and has tons of tiny little leaves. It grows really thick,
providing terrific coverage for fry and baby shrimp. It originates from slow-flowing waters
in Florida, southeastern U.S. It can grow to 2 to 6 inches or 5 to 15 centimeters tall.
It does well in most lighted conditions, but moderate to high lighting is best for vibrant
growth. You can put it in any type of substrate, sand or gravel would work, but soil will yield
better results. It does appreciate nutrients in the water column as well as the substrate.
It doesn't need CO2 to grow, even though a lot of the online plant stores will say it does best
with CO2. It grows in really thick and vibrant mats without CO2, just like this tank. It'll
survive in a wide range of pH, 5 to 8, even outside of that range. And the same thing with GH,
pretty much whatever you throw at it, it'll do fine. Temperature 50 to 80 Fahrenheit or 10 to 30
Celsius with moderate to slow flow. Pearlweed should seriously be the go-to plant for anyone
who's just getting started with their first planted tank. It's so versatile, does terrific
in a wide range of conditions, and is very hard to kill. It propagates like other stem plants,
you just need to take a little clipping and plant it in substrate. Alright, time for the last half
plant, which is duckweed. I know that some of you are already rolling your eyes, but I think
duckweed is really a terrific addition to any low-tech planted tank for a couple reasons.
First of all, it blocks out light to some degree, allowing plants to grow but preventing algae from
forming. Second, it helps to keep conditions stable. If nutrients build up in a tank,
then duckweed reproduces like crazy, keeping the water column clean, also telling you, hey,
there's something going on with your nutrients. Most aquarium fish really love to have some sort
of growth along the top of the tank. It encourages them to come out, makes them feel more at home.
Downside is that it grows crazy fast, like really ridiculously fast. So fast, in fact,
that a lot of people hate it and they won't let it anywhere near their tank. It's also a pain in
the butt to remove from a tank. It's not impossible to remove, but if you miss one little piece,
it'll slowly and then rampantly take over again. So I remove handfuls of duckweed every two weeks,
almost eliminating it, and then it spreads like crazy when I come back. I really like that because
it gives the plants in this tank about a week of high lighting and then a week of dimmer lighting,
and I never have to worry about algae in here. All in all, I give this tank about 40 minutes
of maintenance every other week. I do 50% water change, remove a bunch of plant material,
scrub the glass, and pet some cats. I set this tank up at NoCo Cat Cafe in Loveland, Colorado.
If you need to pet some cats or are interested in adopting one, then this is the place to go.
I have so many terrific service locations, but this one's really hard to beat.
Thanks so much for watching. Let me know if you have any questions. If you enjoyed today's video,
please hit that like and sub button. It helps YouTube to know that I'm creating valuable content,
which encourages me to make more videos for you. See ya!