Here's everything I know about painting flesh tones in oil paint! In this video, you'll find reliable concepts for mixing realistic and believable skin tones. This perfect for beginner artists and portrait artists looking for new ways to think about and mix color.
I use Winsor Newton paint and Beste brand synthetic round brushes. My Oil Painting Palette for Flesh Tones: Titanium white, yellow ochre, naples yellow, pale rose blush, cad orange, alizarin crimson, raw umber, and ivory black
Welcome to my new video.
If you've seen any of my content over the years, you know that I paint a lot of portraits.
And the one thing I always get asked is, Scott, how do you paint flesh tones?
And I always say the same thing, leave me alone, I don't have time for this.
But today, I'm going to take the time and I'm going to put everything I know about
painting flesh tones into this one video so you can see how.
All right, before we get into it, it almost goes without saying that there are a million
different flesh tones out there and pigments that we could use to mix and paint them.
So there's not one formula that I can just give you that answers that question, how do
you mix and paint flesh tones?
But I can give you a number of tips, techniques, and concepts that might make portrait painting
a little bit easier.
Now, to help us in this discussion, I'm going to be showing you different portraits I've
painted over the years so that we can talk about different scenarios and different situations
that might lead to different mixtures for our flesh tones.
To talk about flesh tones, we, of course, have to talk about color.
And color consists of three properties, hue, value, and chroma.
Now, I just recently posted a video where I talk about those properties.
So let's get a little refresher from previous Scott.
Now, hue is the property of color defined by its place on the visible spectrum.
Think of a rainbow, you have red, you have orange, yellow, green, so on and so forth.
Those are the hues.
Then you have value, that's how light or dark the color is.
Think of a value scale that can go all the way up to white or all the way down to black
and every shade of gray between.
The value of the color is where it is in that monochromatic value scale.
Then you have chroma, which is kind of like its saturation or its intensity.
Think of a really bright red and think of a gray and think about a scale between them
where you have a really intense red that gets a little bit more gray, more gray, more gray,
and fully gray, that would be the chroma scale.
So any color you look at is going to have a hue, it's going to have a value, and it's
going to have a chroma.
Okay.
All right, well thank you Scott.
That was really well said.
I think that I might subscribe to his channel and turn on notifications.
I might even check out his Patreon page, but that's just me.
So now with hue, value, and chroma in mind, we can look at our subject, squint down to
soften our focus, and see the average color.
Here on this painting, I would say that the hue is more or less orange.
The value is somewhere in the middle.
It's not all the way up by white, and it's not all the way down by black, so it's somewhere
in the middle.
And the chroma is not the most intense version of orange, and it's also not a gray, so it
too is somewhere in the middle.
Now I know this isn't precise, but it's close enough for us to say that this is an orange,
it's sort of a middle chroma and a middle value, and that's enough to get us mixing
on the palette so that we can try to mix this average color.
Now speaking of palette, let's look at my average palette and talk through the pigments
I use.
Here we see Titanium White, Naples Yellow, Yellow Ochre, Pale Rose Blush, Cadmium Orange,
Alizarin Crimson, Raw Umber, and Ivory Black.
Let's use these pigments to mix out a base color.
This base color on my palette will be what I mix my changes into in the next steps.
So we know it's a yellow orange, we know it's a middle value, maybe a little brighter,
and a mid chroma.
So let's start thinking about things that can get us there.
Well first, let's go ahead and start with orange.
Now we also know that it's going to be a yellow orange, so let's grab a little bit
of the Yellow Ochre.
Now when we look at that, the chroma's too intense.
There's no way we can use this on the painting because that would be far too chromatic.
So we need to add something that will begin to neutralize it.
We also happen to know that the value needs to go up, so I grabbed white right there to
bring that value up and to lower that chroma.
And that might give you a really nice starting color.
And then you can mix out of this base color to get all of your changes, but we're going
to get into that in more detail.
But this is the great way to start, is to squint down, see that average color, mix up
a nice base color or pool of paint on your palette to get you started with your mixing.
Now when I look at the average color on this portrait, I would also say that the hue is
orange.
The value's a little bit darker, but the chroma is also somewhere in the middle.
So let's take that idea and go in and try to mix a big pool of color off of this.
So we know it's orange, and we also know it's a little bit darker in value.
Now when I add that umber in there, it loses some of that chroma, so I'm going to add some
of that orange back in.
And it looks a little bit yellow when it mixes with that raw umber, so I'm going to add a
little touch of the alizarin here, which takes it a little bit more towards red.
And I'm going to add a little bit more of that raw umber in there with the alizarin to
get more chroma and to get a darker value.
I got a little bit too much alizarin in there, and so that happens.
I make errors all the time.
And so I corrected by grabbing a little bit of that yellow ochre and mixing that back
in there to pull it a little bit away from the purplish-reddish tint that the alizarin
gave it.
And so now I have a nice base color for this flesh tone.
Of course, we can't take this base color and just slather it over the painting.
We have to paint.
We have to model.
We have to make form turn and make things look three-dimensional.
That means that these colors are going to have to change as we mix, blend, and paint.
Now the two main things that will cause a color to change are local color changes and
light effect changes.
Now local color changes are happening locally on the surface of the object or the material.
And you could think of a red-green apple as a great example of this.
You have red parts of the apple, and you have green parts of the apple.
If you don't have red and green parts, it's not a red-green apple.
In the same way, flesh tones will change in their local color.
And you can think of that common convention where people break faces down into color zones.
And one of those main conventions is thinking of the forehead as a yellow local color, thinking
of the middle portion of the face as more of a red local color, and thinking of the
lower portion of the face as a more neutral, cool, or even blue local color.
Now that convention's fine.
It's fun.
It will help you paint George Washington.
But it has certain limitations because those local color changes are far more subtle and
varied across the whole face.
Now one principle I use is if the bone comes closer to the surface, you are going to get
a slightly more yellow tint to your hue.
So on the forehead, where that form of the bone is closer to the surface, it does get
a little bit more yellow.
But that also happens up here on the top of the cheekbones, on the top of the bridge of
the nose, and anywhere else that bone comes closer to the surface.
Now you have areas where the flesh is thicker, and it might get a little bit more red in
hue.
And then you have areas where you might have other things happening, like hair.
You could have facial hair.
You could have 5 o'clock shadow transitions into the hairline, where that flesh tint might
get a little bit more neutral.
And that will look cool against the warmer flesh tones that don't have that effect on
them.
The other big thing that's going to affect the color is that light effect.
Now you have that light coming in.
Let's say it's coming from above, and it's going to be striking the top of the form most
directly.
And then the form turns from that light, and the light falls off.
And as you see less of the form, the value gets darker, and the chroma goes down.
Now something else that can affect that, of course, is translucency.
When the light passes through, say, a nostril, or the ball of a nose, or an ear, or eyelids,
you're going to have that light filtered by that form.
And by the time it passes through that translucent form, you're going to have more chroma, and
the hue might shift more towards red as it passes through the subdermis.
Now something else that happens as a result of the light effect is that you have glossier
parts of the flesh where light reflects off like a mirror.
Now this is called the specular reflection or highlight.
And when you have that, you have more of a mirror-like reflection of the actual light
source.
So if you're working from a neutral, relatively white light source, your highlight is going
to be relatively neutral and look a little bit more white.
So when you have that highlight on the forehead, on the ball of the nose, or on the eyelids,
or wherever, you're going to have a more neutral, lighter value color.
So you're going to have color changes that happen because of that light effect, and you're
going to have color changes that happen because of local color changes on the surface.
So let's talk about how we actually mix those.
And let's go back to some of our base colors that we mixed here.
So what I do to avoid getting too crazy with my color is I mix my changes into my base
color.
If I was painting this flesh tone and I wanted it to get darker and lower in chroma because
the cheek was turning from the light or the forehead was turning from the light, I'd have
to start making it darker and lowering the chroma.
And the way I would start to do that is I would add a little bit of raw umber and I
would start to paint into one side of my base color here.
Now I have to react to whatever happens.
I added that raw umber there and it got a little bit too neutral.
So I have to add some of the chroma back in by grabbing that orange.
And so if I know I'm about to paint an area where the value goes down and the chroma goes
down, I'll paint that into my paint, wet into wet, out of my base color here so that it's
closely related to what I've mixed so far.
You can do the same thing for this flesh tone over here where it starts to darken.
That looks a little too neutral right there as the raw umber takes too much chroma out
of the mixture.
So then I add a little bit of chroma back into it by grabbing those higher chroma colors,
the cad orange and the alizarin, and I mix that in and I get a nice gradient on this
color where it goes darker as we would turn from the light or get into a darker value
and the chroma goes down but doesn't drop too much because I restored it there in that
mid part.
So we have cad orange, raw umber, titanium white in these mixtures.
We mixed in a little bit of yellow ochre to modify this one and then when we darkened
on each of these, we added raw umber into our paint and we did it out of the base color
here so that it would be connected and related and if the chroma got too low, we would add
some of our original colors, the cadmium, the yellow ochre, back into the mix to make
it more colorful again.
So you can see how adaptive color mixing is and how you have to be very responsive to
whatever your results are.
That makes it very hard to have a clear formula that you can rely on every single time.
You always have to look at and analyze the results of whatever mixture you're working
on because pigments are pigments and they don't always do what you want, no matter how
much you yell at them.
Stop making it neutral!
We can take some of these colors here and we can mix and blend in the palette, wipe
your brush clean so you have more flexibility to continue blending and I can blend this
flesh tone a little bit darker.
I can take some in the middle there and I can begin to finesse a darker value on this
flesh tone.
Let's try it over here.
Let's grab this darker value here and then sometimes as I get mixing, I have to continue
to modify my mixture but notice I mixed it and changed it on the palette before just
throwing it down on the painting.
That is the safer way to do it and then I can wipe my brush clean here and blend this
flesh tone to get darker here.
Now this might be what I do as I turn around a nostril, turn down the cheek, turn around
a chin, turn around a brow form.
This is how I make form turn as I always talk about by making the value get down, by adding
that umber in there, by mixing that into the palette and then bringing that chroma back
up with those cadmiums and that yellow ochre when I need it so things don't gray out too
much.
Now suppose one of these flesh tones shifts a little bit more red towards the cheek.
I might want to make things a little bit more red so I grab a little bit of alizarin, perhaps
a little bit of my cad orange so that I don't go too far in the red direction and just like
this darker value, I mix that in right here.
Now you can use things like the pale rose blush as a shortcut here and a little bit
of yellow ochre to keep it from getting too red and that can be very, very effective but
if you don't have things like pale rose blush or Naples yellow which are essentially
shortcuts for mixing, you can still use things like the alizarin crimson and the yellow ochre
to get the job done.
So now out of this base color we have a shift more towards red and we can do the same exact
thing over here with this flesh tone and you can see that's too red so let's add some
of that cad orange back in there and even a little yellow ochre so it's not quite as
chromatic and then we have a nice shift towards red.
Now the key here is that we didn't mix this red somewhere else in the palette.
We kept it related to our base color so that when we put it on the painting, it relates
to the flesh tones we're working on.
So let's go ahead and do that.
This flesh tone now, let's say I'm going down to the red of a cheek area and I get
a little bit more red and you can always push it further.
If you don't go enough or you really see some ruddy, rosy cheeks from someone who was
in the sun too much that day, you can always add more here but you start in a more modest
way.
You start in the way that is more connected and integrated into the flesh tones you've
already painted and of course we do that over here with this flesh tone and we get a little
bit more red as you can see.
We can of course do that with yellow here and you can see I'm mixing yellow into this
paint here.
That might be a little chromatic or too saturated so I add a little bit of the raw umber in
there to neutralize.
We put this down and we can get our mixture a little bit more yellow.
So now we have this flesh tone that gets darker and more neutral.
It gets more red here for that local hue change or when the light passes through a nostril
or an ear then we have to get a little bit more yellow here and the same can happen right
here mixed into that flesh tone and we get that more yellow look.
Now let's talk about making form lighter.
This form right here, this color can start to turn towards the light and receive more
light so it's going to get lighter in value.
So the first thing you do is you grab white but the problem is as the form turns towards
the light, it's not just lightening in value, it's also getting more chromatic.
So we can't just add the white there or it's going to look washed out.
It's not going to look like natural form.
We also have to add some of our high chroma colors back in there so that as it gets lighter,
it also gets more chromatic and here we can see on this flesh tone, we're going more towards
the light, we're getting lighter in value but the chroma is also going up.
Now there's a limit to how much you can increase the chroma there on a particular hue and every
hue is different but that's more for a color video that we'll get to I'm sure in the future.
In the meantime, just know that if you're turning that forehead or that nose more towards
the light and you're adding white, you need to add some chroma back into it.
Now let's see what that looks like over here on this flesh tone.
We get a little bit more white and I'm going to add a little bit of chroma into it so we
get a little bit lighter on this.
So if it started to turn towards the light, we need to model the form towards the light
and get lighter.
It gets a little bit lighter but more chromatic.
So that's how I would do that for these two flesh tones here.
Now there's another effect here of course we have to talk about which is the highlight
and the highlight is a mirror-like reflection.
I mentioned this earlier but it's going to get more neutral, it's going to be more like
the light source.
So if you're using a relatively white neutral light source, your color is going to get more
neutral and it's also going to get very light because there's more light reflecting off
like a mirror from the surface.
So we want to add white.
And what's nice about that is that the white raises the value and neutralizes it.
And so you can mix that right into what you have and you now have a flesh tone that looks
like it's reflecting the light source more like a mirror.
So it's a specular reflection of that light source.
Now that we've talked about painting flesh tones in the lights, we have to talk about
painting flesh tones in the shadows.
Unfortunately with shadows, there's no real clear reliable principle that you can use
in all situations.
Now you'll always hear artists say, oh shadows are warm or they're cool and that can be true
but it really depends on the conditions of the scene.
Now if you had a sphere, a form, floating in outer space where there was no reflected
light, no ambient light, no environmental light, nothing.
The shadow would be void, there'd be nothing, no light, you'd see nothing.
It'd be the dark side of the moon.
But most of the time in our studios or anything that we're working from, you can see into
the shadows.
Typically you see some kind of light effect.
It could be reflected light from forms that are nearby.
It could be ambient light from the room or the outside ambient sky.
Just like in the lights, your form or your flesh in the shadows is going to have its
local color and that's typically going to be the same or very similar to that local
flesh tone in the lights.
So keep thinking about that same local flesh tone that you've been painting so far.
Now if your reflected light source is another flesh form of the same local color, then the
chroma is going to go up because that's a flesh colored light striking flesh.
So my flesh color bouncing up into the shadows under my chin is going to cause more chroma.
But if I'm wearing a blue shirt like this or a white shirt that is more neutral, that's
going to be a different color to the reflected light source and that shadow will probably
be more neutral.
Those areas of the shadow that might face more directly out into the environment will
be less chromatic than those areas facing the reflected light source.
So as you can see, shadows and their colors and their temperature are all conditionally
based on what's happening in the environment and what the reflected light source is.
So the first thing about shadow is that it's going to be darker.
So let's go ahead and jump down here and sometimes when I paint the shadow, I do in fact start
a new pool of paint.
I don't mix it into my base color because I want to have a fresh start.
I want to be able to mix the color in a more clean, clear way.
So I'm going to grab some raw umber down there and then I'm going to grab some cad orange
and some white and we're going to get going on that color.
Now this is just basically a straightforward darker version of that color.
Now let's suppose this form does turn into that reflected light and that reflected light
source is another flesh form so that chroma is going to go up.
I'm going to have to go ahead and grab more cadmium orange and alizarin and mix that in
there to get that chroma up.
And the reflected light might make it a little bit lighter.
But here's the thing.
You don't want to get too bright on that reflected light.
The reflected light source is likely not going to be nearly as powerful as that main light
source unless the reflected light source is a mirror or something very shiny.
So in most cases that reflected light source, even if it creates more chroma, is going to
be dimmer, less intense than the main light source and so it's not going to get that light
value.
That's the main key.
Keep those reflected light sources more compressed.
So on this flesh tone over here we might start darker in that shadow and then get more chromatic
as we enter into a reflected light source.
So you can see all these colors are deeply related.
I mix into each other.
When I have to do a shadow, something that's significantly different, I start a new pool
of paint but I think through it conceptually.
Thank you so much for checking out this video.
I hope you found it useful and if you have any questions or ideas about mixing and painting
flesh tones that you'd like to add to the conversation, just put that in the comments
down below and I'm sure we'll all benefit.
And if you like my content, make sure you hit that subscribe button, turn on notifications
and check out my Patreon where I have over 100 hours of art instructional content and
go into real detail and have things that you can follow along with and get better at
drawing and painting on your own.
And you can also check out my website at scottwodellfineart.com.
You can see art tutorials there and you can click on a menu and go through the website
and look at the things on the website.
So yeah, check out scottwodellfineart.com.
It sounds riveting, I know.
And I will see you in the next video.