I Made a XXL Low Tech Ecosystem Bowl Aquarium! (No Filter Aquascape Tutorial)

Fish for Talks
2 followers
Welcome back everybody.
Hope you're doing well.
In today's video I'm setting up my first ever boulder aquarium.
I know some people are not a huge fan of fish bowls, but personally I think they're okay
as long as you just set them up properly and choose the right inhabitants.
I'm thinking some small shrimp and maybe even some small fish as well.
Should be good fun.
Let's get started.
So I've been thinking of doing a boulder aquarium for quite a while now, and then a couple weeks
ago I went to my local garden center, it's actually the same garden center where I also
bought the XXL vase, and they had these massive fish bowls.
Now at the time I couldn't take it home, I was just on my bike, so I didn't have a way
to transport it.
So I just took a picture and then I did a little poll on Instagram just to kind of see
what you guys think about me setting up a boulder aquarium.
And to my surprise about 85% of the people voted yes, so did not expect that at all.
But yeah, then I went back a few days ago to see if they still had those bowls, still
had them, so I took it home, and now we're here.
Look at the size of this thing guys, this is literally the biggest fish bowl I've ever
seen.
But I know you guys want some numbers, so let me just grab my measurement tape.
Okay, so the opening on top is 30 centimeters, or like 11 and a half inches.
And maybe it's easiest to measure the width from the inside.
So let's like put it there, and then go over here, that's I would say like 45 centimeters.
Yeah, like just over 17 inches.
And then let's do the height as well, and that is I would say 41 centimeters, and that's
like 16 inches.
So I'm not very good at math, but I think that comes down to like a total volume of
like roughly 50 liters, which is like 12, 13 US gallons.
So that's the bowl, let's get to work.
First thing I want to add is a little foam leveling mat on the bottom of the bowl.
Okay, foam mat is done, next thing we need is a light.
And we have light.
Now don't pay attention to the setup, this is just temporarily, because I don't feel
too comfortable with clamping it on the edge of the glass, the glass is quite thin.
So I'm going to find a different solution for that.
But the light itself is very nice, we have the Prime Freshwater from Aqua Illumination.
Full transparency, this light was sponsored, didn't pay for it, I got it from the guys
from Vogue Reef Supply, so shout out to them.
Yeah, heard very good stories about these lights, never tried them myself, but yeah,
very curious to test them out.
Now the plan is to go for a no filter style setup, so besides the light we don't need
any other equipment for this bowl, which means that we can move straight onto the substrate.
Now whenever I'm making a no filter style setup, I like to go for quite a thick substrate
layer.
So I'm using two different products.
First we have a layer of crushed lava rock, this is very porous, which will then be a
great home for all those beneficial bacteria.
On top of that I'm going to add a nice layer of Aquasoil, this time I'm using the soil
from Dennerle plants, full of nutrients, which should give us some really good plant growth.
Okay, substrate layer done, nice and easy, we have a slightly thinner layer in front,
and then we have a nice kind of a slope towards the back, so should look very good.
So we can now move on to our hardscape.
Now because we're going for a no filter style aquarium, I want to make sure we leave plenty
of space for plants, because plants are very important, they will take care of making the
aquarium stable, keeping those nitrates low, and just helping to reduce algae.
So I'm going to go for a very simple hardscape, I have two pieces of spiderwood, I've actually
already used these ones before, so there's some moss on there, and there's some glue
on there, but it's no big deal.
And then I also have three black lava rocks, not the regular black lava rocks, these are
a little bit more interesting, with a little bit more character to them, but that's the
hardscape materials.
Here we go, hardscape done, super simple, literally took like five minutes or so.
I placed both pieces of wood together, sort of like in the center, so we have like a little
island style composition, three rocks around it.
That's it, all done.
I'm sure you guys know what's coming next, these two pieces of wood, they're definitely
going to float, let's glue them to the rocks.
Okay, hardscape is nice and secure, we can do a little test, yeah, nothing is moving
anymore, so that's good.
So that means we can now move on to planting.
And guys, I told you I was going to use a lot of plants, and I wasn't joking.
We have a lot of plants to work with, of course, as always, straight from Dennerle Plants,
they've been supporting the channel for a long time, so a huge shout out to them.
So I'm just quickly preparing all the plants for planting, and I wanted to take a little
moment and show you guys this Crypt right here, the Crypt Lucens.
As you can see, this one is really, really big right now, looks good, but if you plant
it like this in a bowl, it's just going to look a little bit silly.
Also underwater, it will probably stay a lot more compact, so what I'm going to do, take
it out of the pot, and then just kind of like split the rock in half, or just remove as
much as possible.
We can clean a little bit in some lukewarm water, so just like so, most of the roots
are now clean, and then I'm actually going to cut off all of the leaves, so just like,
just like so.
It looks a little bit brutal, but now this plant will just have a much easier time to
convert inside the crayon, and it will grow a lot more compact, it will just look much
better.
You can also kind of like split it into smaller portions, so now we have like three nice portions
of Crypt Lucens.
Look at this beautiful Tababoos, that looks so good, one even has a flower.
This is the Pygmaea Bukit Calam, I think it used to be called Green Wavy or something,
but probably one of the easiest booths there is.
Okay, plants are all prepared, and I've also just spent a few minutes making a little planting
map.
So basically grab all the labels, and then place them in the bowl in a position where
I think they will look best.
Kind of just, yeah, shuffle things around for a little bit until I found the best position
for each plant.
I also wanted to mention that, okay, I'm using quite a lot of plants, and if you want to
create a bowl like this yourself, like, you don't have to use this many plants.
The only reason I'm using so many plants is just to, so I can show you guys an end result
within like three, four weeks, you know, like normally I plant the tank, and then I release
the video like a month later or so, so this kind of just helps to speed up the process
a little bit.
Here we go, all done with planting, it's looking good, it's looking packed as well, we've used
a lot of plants in here, but fingers crossed everything is going to go well, all the plants
will start growing properly, and then hopefully in like three, four weeks from now we're going
to have a nice lush green aquascape, or a fishbowl, or whatever you want to call it.
You guys are obviously going to see that in a few minutes from now, but I still have to
wait a little bit longer.
So two months have passed, and the bowl has developed really well.
Plants looking super lush, and there's little to no algae.
It hasn't been a completely smooth journey though, because after two weeks quite a few
plants started to melt.
This is completely my own fault, I used a lot of Aquasol, and Aquasol will release some
ammonia in the beginning, so it's important to do frequent water changes to keep the levels
low.
I'm pretty sure if I would have done a few more water changes, the melting couldn't have
been avoided.
After the plants stopped melting, and the water parameters were good, I added in a large
group of Red Cherry Shrimp, and they did an amazing job cleaning up the bowl.
Besides the Cherry Shrimp, there's also two Amano Shrimp in here, and a few days ago I
added in four Sparkling Gouramis.
The Sparkling Gouramis are one of my favorite nano fish, and if you've never kept them before,
I highly recommend you set up a little tank for these guys.
You might have also noticed a few dots cruising around the tank, and they are Seed Shrimp.
These tiny creatures always appear out of nowhere, but are actually quite useful, because
they basically feed on waste organics.
One thing I absolutely love about no filter aquariums, is how well you can see the plants
photosynthesize.
Especially when the light has been on for a few hours, this bowl basically turns into
club soda.
So yeah, really happy with this XXL bowl aquarium, hope you guys like it as well, and as always,
thanks for watching, and I'll see you in the next one.
