An overview of the steps involved in making an aspis shield from the Greek tradition.
In Robb's words:
Ever since I was a kid, I have had a great passion for armour and weapons of the medieval and ancient world. During my career as a blacksmith and armourer, I have made weapons and armour from all periods and places in history, as well as from the realms of fantasy. Most of this work is utilized by the film industry; whether I am renting out existing pieces from my extensive armoury, or creating specific props or costumes for TV shows, movies or commercials. For many years, I have wanted to build a historically accurate Aspis, the shield of the Greek hoplite. It is an interesting example of late bronze age technology, a dichotomy, balancing form and function. The following video chronicles its construction...
Hi, I'm Rob from Thak Ironworks. Here at Thaks we do a lot of props for the film industry,
armor weapon related mostly. For several years now I've wanted to do a Greek shield,
historically accurate, an aspis is what they're called. The trouble is that the historical
evidence is sketchy at best for this sort of thing. The very nature of the shield,
means that they don't really survive through the centuries.
They're made of organic materials such as wood, leather, so those things decompose,
and then the very use of the shield, which is namely to protect the warrior and get the
living ---- beat out of it, means that they really don't survive. So, based on what I've
been able to determine as far as construction techniques, I've come up with the following
strategy. So this is what I'm going to do. I'm using poplar for my wood strip,
and that is going to form the inner shell. I'm going to cover that inner shell
with rawhide to give a nice tough outer shell, and then I'm going to do
bronze sheet for the rim and metalwork for this. So that will be the composition of the shield.
To form the dome shape that is required, I have started out by building a wooden form.
I've got a piece of plywood, and then I've taken two by sixes, which are
using my jigsaw, roughed them out, glued, screwed, got my chainsaw, sculpted this thing,
and sanded it to create this shape. So this is the shape that we're looking for.
Dimensions of the historical asbestos are apparently 38 inches in diameter with a dome
something like this, and the weight should come in at 16 pounds or so I'm told. So there we are.
Let's get started. So this is a breastplate I recently made. I made it out of brass. I didn't
have bronze, which is what I actually wanted to make it out of. I couldn't source it.
Greek hoplite breastplate, 400 BC, somewhere around that era. I've seen an image in a museum
of one, and I really like the aesthetics of how the torso was. So I'm quite happy with the way
this one came out. I think that the actual aesthetics are quite nice. Since I got the
breastplate, now I want to do the Greek hoplite shield or asbestos. So I'm in the process of
building an asbestos, laminating wood. Essentially, I'm building a domed piece of plywood from scratch
so what I did was build the solid wood form, the shape that I want, and now I've got wood that I've
been soaking for a day. I've done the first half here where I've brought them over and I'm tacking
it into place wet, bringing it down, fitting it in there. This is an experiment in real time and
it's going pretty good. I'm feeling cautiously optimistic that this might actually work,
but it certainly is not a walk in the park. So this is the way the process works.
Start by tacking the piece on next to
the already installed piece.
Bending it onto the form. The center part of the shield things bend very nicely because it's
basically just a quick right angle bend. I ran into a lot of problem as I got to this
kind of decaying angle where the dome is dropping off and the angle becomes ever steeper
and it was a real trick to kind of get to work that around. So I'm hoping that the first layer
is sufficient. The fact that I've got it all in place there as I add the second layer,
it's going to go on something like this where I'll have to start in the center,
remove all the existing nails, and then just start curving a piece over
perpendicular to these pieces and gluing it on as I go and tacking it down. And then I'll have
to do the entire layer spreading out from the center, same way I'm doing this first layer,
but gluing the second layer to the first layer and pulling out the nails from the first layer
as I go so that it will ultimately pop off its form nicely. Let's see how this works out.
Okay, so the first layer is now tacked into place. I did most of it last night. This morning
I just finished off here so you can see it's a little wetter. This side is already drying out
so I'm going to let it dry over the weekend and just see how things set up. After that point,
what I will do is start pulling out the nails from the center and gluing new wet straps on
starting center out and just removing the nails as I go, driving more nails in to hold the second
layer in place and just hope that everything maintains its shape. So let's see how that goes.
This transition here is the most awkward part of this whole thing. I haven't really come up with a
really ideal system for it other than just kind of shaping pieces and fitting them in,
experimenting.
The nice thing about the wet wood is you can actually use tin snips to shear it. With this
many hours into it, my hammer handles are so sticky they're tearing my gloves apart. I'm on
probably about my 12th pair of gloves already today. I think we're about five hours into this
process. It's going well but it's certainly aggravating with the sticky finger.
Okay, there we are. At long last, I've got the three layers of wood lattice glued together.
Everything has been glued, pulled out. I have sanded it inside and out and basically got my
shell done. I'm guessing about 50 hours into the project just to make the wood shell at this point
so a rather time-consuming project. This is not a weekend thing if you want to make a shield like
this. Anyway, I'm very excited that I've got this shell. I think it's a cool shape and now what I'm
going to do is take rawhide and I've been soaking that for a day and I want to stretch it over the
surface and clamp that in place so we have the rawhide stretched over that I'm making a shell
of rawhide which I always call ancient world's fiberglass. Admittedly, I've only used
rawhide on flat shields before. I've never done a dome shape so I'm kind of flying blind as to
how well things are going to stretch and tuck into place here so let's see what happens.
Okay, so here's my piece and now I'm going to start trying clamping it on here and see how
things work out. Usually if I'm doing a flat shield I'm able to get in and tug the piece
from side to side. I'm just not sure with the dome shape how easy that is going to be to
accomplish. So, so far so good. The second half, I'm trying to stretch it. I'm not sure how that's
going to go. There might be some readjusting here to make this whole thing work out. Okay,
so I'm on my last. I've got three of the pieces clamped. I'm going to my fourth piece but you can
see I've got a lot of wrinkling here so now I think I need to go back and pull out and try to
even out this extra material here to get more of a stretch and this this is what I was worried
about and I'm not really sure how it's going to play out so I'm going to just try getting
this one clamped on and then I'll have to remove pieces and stretch it out. Okay, the final couple
clamps on here it's stretched out quite nicely. It was a little bit awkward to get some of the
wrinkles out there but I think it is now more or less sitting flat and this is going to now shrink
into place. At least that is the game plan. Very hot sun. I'm hoping that it's not going to dry
too quickly but what the hell. Gotta take a chance. 20 hours have elapsed and the rawhide has dried
and you can see by my expression that I'm as giddy as a school girl with the results.
Actually it did work out really good. Stretched out. It's drying out nice and tight.
Got no wrinkles. Got one little one here which I can address but I'm really quite pleased with
the results. So we're going to let this dry for the afternoon yet and then we'll be able to start
working on assembling it tomorrow but right now we got to make some metal fittings.
Namely the rim, the piece for the forearm and the handle. So we're going to go inside and start
working with some bronze. I'm making the rim out of bronze. I have this sheet of bronze here.
The guy would be in his mid-90s now if he's still alive. He got it from his work back in the 40s and
it was a piece of bronze that they were throwing out for scrap. It's hard to come by. You can get
silicone bronze. It's really expensive but it's still hard to find. This is old school bronze
apparently. I've worked with it a little bit and it is pretty cool stuff. It's quite thin but because
I want to keep my shield light I'm working with it anyway and I'm doing a lot of texturing to
it to give it some rigidity as you will see. So right now just simply laying this out and cutting
out some pieces. This is the bronze 24 gauge which is really thin for what I'm used to working with
as an armorer but it's all I had and I want to keep as I said the lightness on this shield down
so I'm embossing this to make it extra stiff. To start out with here I'm just going to bend
the rim down so this is just kind of a boring process. Working very thin sheet metal like this
it's very subject to wrinkling. The nice stuff about this bronze is it's super malleable so it
tends to stay where you put it whereas steel of this thickness would be just wrinkling like tin
foil. So it is easy enough to work still a little tricky at this thinness. Okay I've bent over the
rim here now I'm going to start putting the embossing in the design and to do that because
I was going around the full circumference I needed to get the geometry right the math balance out so
I decided to spend a little bit of time about an hour and a half to build this jig here which has
got the repeating pattern one of it that I can just jump it across also has these bars here which
just kind of keep everything into position. So I'm just going to get it in its first position here
and start hammering and then there is just a lot of hammering.
Voila! So four pieces they will form the entire circumference of the shield each one butts into
the other and I've already made little tabs that will cover up the gaps there so we're pretty
getting pretty close to assembly. Right now I still have to make the armband for the inside
so I think that is my next metalworking process so let's get started on that.
This will be the armband here this is the shape that I've come up with again I'm using this super
thin stuff but I want to keep it for consistency to have bronze throughout so I'm going to do some
embossed lines in there raised lines that fluting will give it rigidity. So I've got my die and my
power hammer when I do armor so I'm going to run some lines here and then from there I'll be able
to shape the rest of the piece. It's going to get loud. At long last the assembly phase. I've
got two coats of red on here hellboy red is what I'm going with so we're going to pull off these
clamps now see how the rawhide has melted into place so to speak and then we can start getting
the rim on look at that it worked out so we've got an individual piece here fits on like a second
skin so to speak I just want to trim the outside here so I can get my rim on I don't want extra
material there it's going to be a tight fit the way it is so I'm just going to roughly scribe that
and cut it down well here goes nothing so far so good they're more or less fitting into place here
going to do some final adjusting and so I'm just temporarily bolting the pieces into position for
now in case they need to be adjusted and then I will pull out the bolts and add the rivets
cautiously optimistic that things are falling into place the way I want them to so I'm attaching
the four rim pieces here I've made these four tabs to kind of cover up the gap and hold everything
into place fairly awkward process but it's starting to come together now I'm putting the
last one in place I'm always curious to know how they actually assembled pieces in ancient times
they didn't have bolts it's what I use making armor all the time is bolt everything together
as I'm building it so I can get everything fitted not sure what they did I don't think
anybody really is one of the mysteries okay everything is roughly in place now I'm gonna
have to start hammering the rim down bringing it around so riveting at the long last I'm using
copper rivets and this is a little tricky the copper rivets for obvious reasons I think
fit the period they're softer than the brass ones I'm using brass washers chiseled a little bit of
texture into the brass washers just to make them look a little bit more ancient world
okay I've got the rim riveted on now need to do a little fine tuning on that that was
a lot more challenging than I was hoping for it's late in the day I'm getting tired I just
want to get this armband put on and then I think I'm going to call it a day and come back fresh
tomorrow so my reasoning for putting this thing where I'm going to be putting it is I want to have
these guys sitting pretty much upright that like that this is a center line here the thing is when
I'm holding the shield the comfortable position is not to hold it at right angle to your body
it's on a 45 and that's just like an ergonomic position so I want to try to get that and have
these line up not sure how successful I'm going to be on that so based on that I think if this
is coming off on a 45 I should be able to just be in alignment there meaning this should be about
here just prior to riveting this in here I should mention about the work hardening of
bronze any of the copper based metals will work hard and as soon as you start hammering on them
that's something that happens very quickly much more so than with steel and it's a good thing
when you're doing stuff with armor and that you want to plan that your last pass should allow the
thing to work hard and end up with the way you want the problem with it work hardening is when
you're working it and you need to do more shaping it could end up cracking so you need to anneal it
from time to time meaning you need to heat it up and quench it the non-ferrous metals you quench
it to anneal it and that softens it up so that's all good for working it but your final shape you
want to have a long working time to work harden it to maximum effect so that it's going to be tough
enough to stand up to its abuse here so I'm just trying it seems that this thing is stiff enough
for what I'm going to need it for and I think it's efficient okay that's fun first two are set
that was the tough ones I got four more now drill those out get some ribbons in there
so I've done some fine tuning seven hours fine tuning this thing's taking forever
anyway it's looking rather sexy I'm uh pleased with the results thus far uh so you can see
there's a surface of the shield inside
got the handle both handles are in place now um I need to put some padding in yet here just to
tighten it up on my arm to give a little bit of padding for use um incidentally I keep forgetting
to mention the shield is designed to sit on the shoulder it's part of the design of this so it
makes it very comfortable to wear when you're marching around that you're not your arm isn't
getting fatigued all the time so anyway there we go now I want to put my insignia on or a scorpion
is what I've decided to do which I thought looked kind of badass so okay so here I am tracing out
my scorpion so get this roughed out I can start painting it in and that is basically the final
step on this thing race to the finish line the grand reveal so I'm pretty happy with the end
result I like the way the red and the bronze play off each other I think it creates a nice
aesthetic I think a very striking shield it looks good from a distance weight wise I was aiming for
16 pounds if you remember it actually came in at about 19 and a half pounds a little heavier than
I was looking for I'm not quite sure how I could slim that down perhaps if I didn't use the rawhide
that would have probably removed four pounds right there maybe make the wood a little bit thinner I
don't know not really too disappointed I think it's a good sturdy shield seems still wide enough
for its size all right for all you techno nerds there I got some specs on it so time wise it took
me 12 hours to build the wooden form just initially to get that started from there it took 50 hours
to actually make the wooden shell with the wet wood and all that stuff and the gluing and the mess
the jig for my rim motif took me about two hours to make the metal work itself doing the rim and
the handles took about five hours stretching the wet rawhide over the form that took an hour
the assembly took about five hours red paint that was two hours and then painting the scorpion that
took me about five hours coming in a grand total of 82 hours so rather large investment in time
to make a single shield but I think the result is quite nice I'm very pleased this was fun I think
we should do it again