Glaze Making - Where to Start + Cone 5/6 Recipes

Ceramic Art Studio
35 followers
1 Video View·Dec 25, 2025
AI Generated·May contain errors
So I want to make a quick video going over the basic equipment that you might need if
you're going to consider making your own glazes as well as a book I recommend you buy and
some recipes out of that book.
So let's talk equipment.
Hopefully you already have a dust mask.
If you're doing any sanding of your bisqueware or dry sweeping your floors and not mopping
you should definitely own one of these but it should go without saying if you're dealing
with dry chemicals you should be using some sort of a mask.
You may also already have a paint mixer.
I 3D print my own.
I keep a bunch around.
It's helpful to have I'd say at least three or four depending on how many glazes you're
working with but you're going to need a paint mixer if you don't have one.
But beyond that all I find I really needed in the end was a in this case an 80 mesh sieve
80, 100, 120 are the numbers that you're going to see.
100 of course they come in different meshes as well but those are the ones that seem common
to a pottery studio.
80 mesh is what works for me.
100 would probably also be just as good.
If you're going to want to take specific gravity readings of your glaze to kind of keep track
of how much water is in it I recommend you do that.
An easy way to do that is with disposable syringes.
You suck up your glaze to a, in my case I use 50 mil and I'll weigh that and I'll make
a note when I'm glazing and I'm doing tests.
That's how I keep track of specific gravity.
Which is not the same thing as viscosity which is another topic but this is an easy inexpensive
way to make sure you remember how much water you had in your glaze when you tested it.
And then of course some sort of a scale.
I really prefer a, I really like a triple beam in that I have a digital scale as well
but it always seems to have the batteries dead on it.
There's just no batteries and it might take a second or two longer but not much longer
to set these up and I find the process, I don't know, it's kind of fun.
I like that.
I recommend that you get something that has a fair degree of accuracy.
So getting one of those $20 kitchen scales is just not going to work.
It might work when you're mixing really large amounts but when you're using something like
this and making your own glazes, you're making 100 gram batches, 200 gram batches, small
amounts where your additives might only be 1 or 2 grams and anyways, a tenth of a gram
is I think a minimum.
So what I really want to speak to are to the people who are thinking about starting to
make glazes and just don't know where to begin.
And what I recommend you do first is get a couple good books.
Yeah, I bought a half a dozen and I went through them all.
They were fine.
I was not impressed with the recipe books except for this one.
John Britt made two of these books, one in mid-range and one for cone 10 glazes.
Both books are really good because I fire a cone 5.
My recipes come largely out of this book and so I can't recommend this enough.
I got in contact with John Britt.
I asked him, hey, is it okay if I do a video and share out some of these recipes that I
like and he said, sure, not a problem, open source, no big deal.
So that's nice.
But I recommend that if you're going to sit down, you're going to read these books and
you're going to start making lists of, if you're like me, you're going to make lists
of all the recipes that look good, things you might want to try, trying to keep track
of all the materials that are in all of those.
So maybe by the end of your readings, you can, it'll just somehow come together as this
list of materials that you're going to want to get.
And man, that does not work so good.
Because in the end, you need to figure out from your supplier what their materials list
are.
In this case, my local supplier gets their chemicals through Laguna and this is what
it looks like.
You know, they list out different, say you want silica, you have 200 mesh, 325, you know,
some other type.
That in itself is kind of confusing.
You're going to have to just grin and bear it.
A lot of times you can look up each one of these and get a description of what the difference
is.
Sometimes it doesn't really even matter.
You might want to call your supplier and ask what the prices are at different quantities
for ingredients if you start winnowing your list down.
But get yourself a list of what your supplier has available when you start going through
your book.
So keep these side by side and make sure when you find a recipe, after a while you'll start
recognizing the ingredients.
But make sure that that's what you can get.
A case in point is you might see something that says F4 Feldspar and then you realize
that your supplier doesn't sell F4 Feldspar, but, you know, maybe MinSpar 200 would be
an alternative.
Well, you want to make sure that your supplier has MinSpar 200 on its list or you might want
to just skip that recipe, tag it for future thinking, you know.
But that's how I'd start.
Get your list, get a good book, and work together to figure out what glazes look the most interesting
to you.
So let's get to some recipes.
So the book is organized by kind of like by color groups and this Glossy Base II I use
a lot.
I refer to it as GB2, if I ever say that, that's what I mean.
That's what the recipe is.
And if you're going to make your own glazes and you don't know where to begin, start by
figuring out a clear and a white recipe that works on your clay.
Get a clear, get a white, and then you can play around with adding colorants and oxides
to those two bases.
But if you have to pick one place to focus on, focus on getting a good clear and a good
white and from there you can do all sorts of fun things.
Okay, glaze number two, oil spot combination.
So this is two glazes.
The temaku is the darker glaze that goes on first and second is the associated combo that
goes over the top.
Again, that's on page 90 and it turns out something like this.
It's fun.
Depends how thick you put the temaku on, determines how big these spots are, but it's a fun glaze
to use.
Next glaze, page 91 under Oatmeals, Tombuck Cream Breaking Rust, you can see it there.
And I'm firing all of these electric, so when I show you examples like the oil spot a moment
ago, I'm firing electric, I'm firing it to cone 5, that's the recipe.
This is an example of what it looks like.
Depends how thick you put it on.
It can be really white or much lighter with more speckles, but it breaks nice.
It's a fun glaze.
The next glaze is on page 108, Chun Sea Foam.
This one's really fun.
I use this on a lot of outdoor pottery just for what it's worth.
It ends up looking really good on succulent pots, but there's the recipe and this is what
it looks like.
And it breaks.
This isn't a great example, but it does break to kind of a gold or a dark like that when
it hits highs and lows.
It's a really pretty glaze.
People really like it.
Alright, next glaze, page 117, John's Noxzema.
A really dark, shiny blue.
You got that?
This is what it looks like in my kiln.
Really shiny blue.
It can have pinholing.
I've had to add an extra ramp hold on my electric firing schedule to let it drop the temperature
and sit for a little bit before it cools down to help get rid of any pinholing, but it is
really pretty.
Also good, this being so bold, for layering and for kind of dribbling on other things
if you're going for something wild.
It can be a lot.
It can be a little too bold sometimes all by itself, but it is a fun glaze to keep around
for putting on other things.
Next glaze, Floating Blue.
I really like this glaze.
It's Floating Blue 2 from page 119.
There's your recipe.
I find it really stable.
I haven't had any problem with crazing or crawling or fitment.
I like how it breaks to that kind of gold color.
And if this is thicker, it gets quite blue too, so you can see it kind of building there.
It gets a little more blue, but yeah.
Good glaze.
And for the last glaze I'm going to give you, recipe 4 is on page 158, and that is Ashley's
Rivulet.
You probably recognize that name if you watched the layering video a couple days ago.
When I was doing these bottles, and this is the Rivulet dip that I dipped on the rim on
top of all the others.
So if you were wondering what the recipe was for that, it's what I just showed you.
There's so much to talk about on this topic that there's absolutely no way I can do the
idea of starting to make your own glazes any justice in a video this short, but that really
wasn't my point.
I wanted to hopefully demystify it, and if you have no experience, and it just seems
like you're going to have to do a lot of math, and chemistry, or learn software, or
who knows what.
It's not that hard.
The amount of equipment you need outside of a bunch of buckets is not intensive, and it's
fun if you like doing that sort of thing.
And I think it makes the most sense when you're dealing with a glaze that you're going to
use a lot of.
If you want a trash can full of a glaze to be able to dip huge pots into, then learning
how to make that glaze might not be a bad idea.
So I hope that was helpful.
Go out and buy John Britt's book, Well Worth the Read.
And yeah, that's it.
