BUGATTI — A NEW ERA: Peak Engineering

Ex Hypercars
8 followers
When you develop a car you can never look at a single component individually without taking the
whole context of the car into account. In this case there's so much architecture and packaging
as we call it in the car industry that you don't see immediately here but I'll explain it to you.
So the W16 is a very short engine for its size but quite wide and the layout used to be in a way that
the gearbox was in front of the engine now it's behind the engine and then that gearbox was feeding
the power or torque to the front axle but also to the rear axle so the prop shaft for the rear
axle went through the engine block to the rear differential so it was a very wicked layout.
We don't actually have that connection now the rear axle is completely separate from the front
axle and the front axle is two electric motors there's no physical no mechanical connection
between the engine and the front wheels but in between now we have a battery and the gearbox
moved from the front to the rear. It also enabled a different aerodynamics of the car because now we
have a narrower engine which is also tilted in the car it's actually not straight like here it's at
an angle to enable a very interesting diffuser which is double the length of a Chiron diffuser
and that's actually very beneficial because you want downforce from underneath the car from the
instead of wings on top of the car because it comes with less drag penalty so you get more
downforce for less drag and in this case we have super long venturi tunnels left and right of the
engine because the engine is now narrower and with the angle of the engine and with a lot of
trickery that we did also with the rear crash structure and the suspension which is now exposed
in the airflow so the suspension is also shaped like an airfoil like a wing basically because
it's in the airflow the air flows left and right next to the engine so it was very important to
keep it narrow. People sometimes forget that total aerodynamic resistance of a car is the cd times
the frontal area so it's very important to reduce the frontal area especially for a car that goes
the speeds that we do as you know we are about breaking speed records and the Tourbillon is
faster than the Chiron by reducing the frontal area by bringing the passengers closer together
by having a narrower tunnel by having the gearbox behind the engine it all works together as one.
We wanted to show that even this naked form without the bodywork it's a Bugatti horseshoe
and this horseshoe does a lot of things we have the medium temperature cooling systems here so
the air is flowing here to cool the front electric axle and the battery and the brake system and then
here comes the luggage compartment and left and right is the cooling for the combustion engine
so when the air goes up the car goes down that's usually how downforce works so in the Chiron the
air would go in here and because of the luggage compartment it would go underneath the car you
don't really want air to be going underneath the car from here so instead now we have the air going
up through these radiators and exit in the bonnet. The electric motors are in front of the axle
because basically the feet of the passenger and the driver of the car are coming all the way until
here so you are very close with your feet you can't have the motors they would be in the foot
space of the passengers of the car and then you see here is kind of a hole between the gearbox
and the inverter why because this is where the steering rack goes and then in front of the two
inverters which is also a very integrated dual inverter so it's basically one box with two
inverters with two motors we have the luggage space which is now completely different and now
we have a very deep but narrower luggage space. What we did with the Tourbillon was having a very
narrow powertrain that's on top of that angled so that we can channel the air left and right
from the powertrain and actually because of that it goes through the suspension and you can see
that here in this wing-shaped 3d printed suspension arm and then it goes up until the end of the
diffuser and then goes away and then actually even the exhaust pipe which is not here now is
separating the airflow from the diffuser and the turbulent air behind the car and it's all a big
interplay of different systems on one side the powertrain layout which enables the whole
architecture to make it work like this but also for example in a normal car what you would see
here in the back now would be a big metal crash beam like thick like this and going from left to
right all the way across the car and we don't have that because our diffuser is actually the crash
structure so this is the diffuser cone you can see the shape of the diffuser but it's at the
same time absorbing the crash energy so two of these 3d printed metal structures which have
this tiny intricate little metal structures inside which are there to absorb the energy
enable it to start with the diffuser so tall now when the car would be on the floor this would be
at knee height so this is the terminal height of the diffuser and with the diffuser you have to go
in very gentle angles you basically have to stay at around 11 degrees and that means you can't go
very aggressive because otherwise the airflow would separate from the diffuser and the diffuser
wouldn't work anymore so if you start that high it means the diffuser needs to be really long
and in the case of the tourbillon the diffuser starts in the middle of the car basically
underneath the passengers so half of the car's length is the rear diffuser which is perfection
for an aerodynamicist that's what they want to do but that means then that the suspension because
of that is in the airflow and traditionally you wouldn't be able to make a suspension arm that's
aerodynamic because it has to be very strong to sustain the forces that it needs to do but then
comes another thing that we did for the first time in the tourbillon 3d printed suspension so
we see here see it here much more prominent in the upper wishbone in this organic topologically
optimized shape it basically means that software and ai is optimizing the shape of the part in
order to cope with the forces that needs to encounter during acceleration braking cornering
or speed bumps and you take atom by atom away to just leave the structure where it's absolutely
needed to cope with those forces plus of course some buffer on top of that to encounter also some
unpredicted situations and that enables also the design of a wing-shaped suspension arm you can see
the difference between the upper arm and lower arm because this one is not in the airflow this one is
but inside of this shape there is again microstructures that enable this kind of
shape to be strong enough but still aerodynamic so it all works together the narrow powertrain
the integrated crash structure 3d printed suspension it's not just about individual
components it's about how you bring that together to have a benefit to the overall car in terms of
weight packaging space aerodynamic efficiency downforce performance and we all bring that
together in this car because we thought about all of these bold things together
at the beginning of the development of the car
