🎄Christmas In July High End Dupes | Diy Christmas Decor | Christmas Diys

Decor with Me
7 followers
#christmasdecor #christmasinjuly #thelatinanextdoor
Christmas High End Dupes are so much fun to make. I have a compilation of my favorite Christmas Look for Less Decor Ideas and I hope you enjoy.
Check out the rest of the creators here: • ✨Christmas in July 2025🎄
Our shop is currently closed during our move (the best way to support us right now is to watch our videos)
🛍S H O P🛍
DIY PAINT: https://www.thelatinanextdoor.com/diy...
CANDLES: https://www.thelatinanextdoor.com/hom...
MERCH: https://www.thelatinanextdoor.com/mer...
AMAZON STORE: https://www.amazon.com/shop/thelatina...
C O N T A C T
Any questions, inquiries or collabs: [email protected]
💌 M A I L💌
The Latina Next Door, LLC
3372 Main Street
No. 130
Pikeville, TN 37367
Hey there, today we are celebrating Christmas in July and I am bringing you some of the best
look for less Christmas dupes. Shannon of the Cozy Christmas Cottage is hosting this
once again this year and she has a roundup of many talented DIYers sharing their Christmas in
July themes just for you. I will have a link of the playlist so that you can check out
all of the other creators and now let's start on those Christmas DIYs.
The first piece of decor that I'm going to be recreating is this pine cone wreath from
Serena and Lily. It's on sale for $199 but even it being on sale it's still really expensive.
The first thing I'm going to need is a wreath form and I picked this one up at my local Dollar
Tree for $1.25. You can always use larger or smaller ones depending on what you want to make
for this and then I also picked these pine cones up from the craft section at Hobby Lobby. These
were from last year when everything went on sale and I know I picked these up for half off.
You're going to need two of these bags. Then I picked this up and if you guys don't have one
of these this is so convenient for crafting putting your paint down or even holding your
glue gun and it catches all the drips. So I thought I'd share this little tray and how
handy it can be and you'll see me use it later on in the video. Now the first thing I'm going
to do is I'm going to paint the entire wreath form in some brown acrylic paint. This way when
I glue the pine cones onto the wreath form if there are any little areas that I happen to miss
or not be able to cover completely you will not see any green shine through. Once the paint is
completely dry you're going to begin to hot glue your pine cones onto the entire front surface of
your wreath. Just place a small amount of hot glue and then hold each pine cone down for a few seconds
until it dries and stays on the wreath. Try to get these pine cones as closely and tightly
as possible to each other so that it looks as full and nice as possible.
Make sure you try to reach the back as much as possible without going to the back of the wreath
so that wherever you hang it or set it down it lays flat. Next you're going to need to make a bow
and I found this ribbon at Dollar Tree for only three dollars and it had a nice velvety
texture to it so I'm going to use that to make a bow. So I'm going to start by making a bow and
texture just like the one from the inspiration so I decided to go ahead and use this green one.
Of course you can always use any color that you want. I usually take two pieces of ribbon and
lay them down over themselves to create the two top bow sections. One a little bit smaller than
the other and then I lay the smaller one on top. I cut those individual pieces together and then
I kind of cinch the center and using some string or jute or twine whatever you have tie the center
together to hold that bow in place. I fluff up both ends of the bow and then I take a separate
piece of ribbon and I use that for the center and the little legs that kind of just hang down.
I wrap it around the center of the bow and using hot glue I hold everything in place. The last
I did was cut a little bit of that same ribbon and put it in the back of it in order to create
a little loop so that I can hang my wreath. And here is how it turned out.
And I always like to share a side-by-side comparison of what the original is versus
mine as well as the savings. This one is actually on a smaller scale and if you wish to create a
larger one you can. It'll cost a little bit more but it will still be a great savings.
We're going to be attempting to recreate these faux potted berry cluster cone trees.
Say that five times fast. They're pretty large and the smaller one is $79 when the larger one
comes in at $159. Now the perfect thing to use to recreate these would be these metal cages that
have been found at the Dollar Tree Garden section. I had three over the summer but I was not able to
find any this time around for these DIYs. So if you're unsuccessful in finding these like I was,
the next best thing are these right here that you can get right now. Now if you were making the
larger ones I would suggest using the larger metal buckets that they have at Dollar Tree
but since these are smaller I am using these that you can find at the party section.
And finally you will need a ton of these. Now I did notice this year these only come with four
sprigs on them when they used to come with five and now they're $1.25 so you're actually paying
more for less berries. So just keep that in mind when you do this and consider your costs.
Now the first thing you want to do is remove all of the tinsel that goes around each of these
trees and it's actually quite simple. I wanted to make one of them taller than the other just
like in the original inspiration and since I have limited supplies I had to get really creative.
So what I did was I melted two ends of half a stick of hot glue and I put that in between
two of them to give the illusion that one of them was taller than the other.
Then with some wire cutters I began to cut off the little heads of the berry bundles so that I
can start placing them on the cones. Now before I adhered any of the berries in I wanted to give
it a little bit more surface area so that the berries would adhere. So what I did was I took
some yarn that I actually had purchased for another DIY that you'll see soon and I began
wrapping it around all of the little teeth that were already on the cone. It held it in place very
well and this will just give me more surface area so that the berries have something to adhere to
when I glue them on. As I began adding berries to the tree forms I started at the top and worked
my way down. I cut the berry little bundles down into smaller ones and adhered them that way.
I continued all the way to the bottom and then after I was done adding the main berries I would
come back in and check if I had any areas that needed to be filled in. Then I took some paint in
Santa Red. This is some old paint that I've had on hand and I decided to paint all of the berries
because not all the berries are the same color and sometimes you can see the styrofoam from when you
cut them from the previous bushes. So I decided I wanted to cover all of those white spots off
and give it a more consistent look so I painted the entire thing. I also wanted the berries to look
a little bit more shiny so I had some Mod Podge on hand as well in Glossy and I gave everything
a nice coat. I wasn't perfect with this but it did give a nice sheen throughout. Once it was dry all
you needed to do was adhere them on to the buckets or you could leave them without. Honestly I like
without the buckets myself. So let's see how we did. Because these were much smaller than the
ones I had online I went ahead and priced out two of the smaller ones for the original Pottery Barn
ones. So if I would have bought two of the smaller ones it would have come out to $158
compared to mine. For the berries, the tree forms, and the buckets I paid $34 for two of them.
All right so I don't know about you but I have a tough time deciding on tree toppers because I
don't like any of them and sometimes I don't even put any of them on my trees. I'm guilty of that
but I did see this one on Ballard Designs website and I absolutely fell in love and of course even
on sale for $79 it was still too much but I knew exactly where to go to get exactly what I needed
to recreate this look. So off to my local Dollar Tree I went and I found me one of these little
cones and you've seen these around they come around every single year and I picked up two
of these mirrors from their home decor section. Now this one's going to be super easy and super
quick. I mean they're already gold so there's no painting involved. So the first thing we're
going to do is unwrap this Christmas tree because we need the frame that's underneath.
This is what you're going to end up with and the best part is that it's already dark green
so it's going to blend in nicely with all of those pine needles. You're also going to have
to cut it down because you do want it to fit inside of that mirror and I'll show you what I
mean. Now you're going to want to place it on top of your sunburst mirror however here I can see
that it's not going to fit quite yet so I'm cutting it down a little bit more trying to get it as
close as possible to the end of the inside of one of the starbursts as you can see right here.
I want it to lay just inside the top as well as the bottom so I'm cutting off those end pieces
and what I'll end up with is four little pegs on that bottom little section and that is the perfect
length. And next you want to take a good amount of hot glue and you want to glue this
onto the inside of that starburst and I apologize for my camera for some reason it kept going in
and out of focus in a couple of these sections and I had no idea until after I saw the footage
but as you can see here I am laying it inside of the starburst and I'm adding a ton of hot glue.
Now if you want to add a little bit of e6000 in order to make it a little bit of a stronger hold
you are welcome to do so. Now the original tree topper was only one-sided but I wanted mine to
be double-sided so if it's in like a center of a room and you want to see your tree from behind
you have a sunburst on both sides plus it was really easy to put together as well as inexpensive
and it worked so well. Now I did hold it for a bit while it was drying and I kept adding hot glue
where I thought I would need a little bit more support and I just was patient with it and let
it dry and become sturdy and here is how it turned out. All right here is how we did the original
cost $79.20 and mine only cost $3.75 because I only used three items from Dollar Tree and
what's even better is that mine is two-sided. This was so easy and I love how it turned out.
We're going to be recreating these red candy striped ribbon votives and you won't believe
how easy these are to make and how inexpensively you can do it. So I went to my local Goodwill and
I found two of the perfect vases for only $1.09 a piece. The first thing I did was remove all of
the stickers and clean them thoroughly making sure there was no residue. Then I came back in
with painter's tape and began to create my ribbon that swirls around each one. Next I took some of
that same Santa red that I had used earlier and I wanted it to kind of look like a stained glass
and I decided to mix it with Mod Podge. Now it worked in some areas but it seized up on me in
others and I got a couple of clumps and thicker areas so I'm not sure if it was because maybe
the mediums were a little older and I've just had them for a while or if I just made them too thick.
Either way it still worked out. Now you don't want this to dry completely before you remove
the tape so what I did was I paint one, let it sit while I paint the other one,
then once I was done painting the other one I would remove the previous one's tape. That way
it wouldn't pull on any of the dried paint that was already on the glass and then create just
jagged edges and even mess up the paint job. I did have to touch up in a couple of areas but all you
do from here is just let them dry and add a couple of candles and you are done. So let's see how we
did. The original pair at Pottery Barn was $69 for both and with getting these at Goodwill and
spending $1.25 on each of the candles these only cost me $4.68. I saw this faux
berry kissing ball which I'm assuming is the new version of the mistletoe and I wanted to try it
out. Now I tried this a few years ago on a smaller scale when I created some smaller berry ornaments
like this however I wanted to try it on a larger ornament to see how nice it would look if I did
it in a bigger size. So I got this a larger ornament at Dollar Tree and I picked the red
one on purpose so I wouldn't have to paint it if it were like a white styrofoam ball. Now I needed
to remove the top little lip that goes underneath the holder to hang it because it needed to be nice
and smooth. So my husband found a saw and he was able to cut it off for me. Now I wanted to add
the ribbon to the inside of the ornament to hold it up and I would have actually used a more solid
red ribbon but they didn't have anything at Dollar Tree that did not have any print on it so I just
settled for this see-through one which still worked and all I did was hot glue it to the
inside like that and later on I will cover that hole. Now this one's going to be a little bit
more tedious because you're gonna have to adhere each and every berry individually onto the ornament
and I started at the top rim and I began working my way around and down and once I get about
halfway done I like to flip it around and maybe put it in a little bucket or a cup
and then work my way back up to the other side of the ornament and enclosing the hole where the
ribbon is is actually very easy. I would just add one berry at a time, wait till it dries and I'd add
another one until the hole closed completely and just like I did for the two previous trees
I took some of that Santa red and painted the entire ball so it would not have any of the
white styrofoam showing. Once that was dry I'd come back in with the glossy Mod Podge
and I'd give it one full coat and that was it for this DIY. Now let's see how we did for the
original Pottery Barn. The larger one of these was $69 and I based it upon that since mine was
a larger one as well so mine with four bushes almost because I did use a little over three
and the ribbon and the ornament it cost me only $7.50 to recreate this.
The next thing I saw at the Pottery Barn website that I really loved were these wooden nutcrackers.
I'm not really a nutcracker fan because I'm not a fan of all of the different colorful ones but
these that were nice and wood and simple were perfect. The smaller one costs $59 while the
larger one it costs $79. However I came across these unfinished wood nutcrackers at the local
Dollar Tree in the higher price section and these are going for only $3 a piece and for this I am
going really simple. I am using some leftover old brown acrylic paint that I had on hand
and adding some water to water it down to create a stain but you are welcome to use any kind of
stain that you already have on hand or you can even brew some coffee and you can use that.
Now you will find that because it's unfinished wood it might soak up the stain
and it might look a lot lighter once it dries so what I did is I actually waited till it dried
and gave it another coat to deepen the stain and that worked pretty well. I could have done
it the third time if I wanted it darker too. After that all you have to do is let it dry and enjoy.
So let's see how we did because mine were slightly smaller than the ones that were
at Pottery Barn I went ahead and priced two of the smaller ones. That still came at $118
versus mine which only cost me $6 because I had a little bit of leftover brown paint and I used
water for the stain. For this next DIY I'm going to be recreating this crocheted striped ornament
that I happened to find on Pottery Barn's website while on my phone and they go for $9.50 a piece.
We're not going to crochet but I did find this yarn at Dollar Tree and I got this cream colored
one as well as this red one and then I got two of the plastic larger size clear ornaments.
The first thing we're going to do is we're going to remove the little top off the ornament
and we're going to begin to wrap the cream colored yarn around the ornament. Now you're
going to have to be very careful here that you don't go over the yarn itself because then your
stripes won't come down the ornament in an even pattern. So add little itty bitty bits of glue
as you go throughout different spots so that when you lay your yarn it actually stays in place.
And of course once you're done with your first stripe you cut the yarn and then begin to add
your second color in this case the red and then I continue to do this with the rest of the ornament.
Now after reaching the midway point I like to stop on a full stripe and then flip it over
and start from the bottom and work my way towards the inside of the ornament and the reason I do
this is because once your ornament starts coming down and under the ribbon will want to come down
as well if that makes sense and it starts slipping and it won't stay in place so if you flip it and
work it from the more narrow side to the wider side it tends to stay in place much better.
Now because I didn't have my wood bead stash and I couldn't find any at the Dollar Tree
I decided to go ahead and wrap the yarn around the little top to the ornament
that way it wouldn't be so loud with it being silver. The last thing to do was to add a ribbon
and I used some of that ribbon that I had used in my earlier DIY and that was it for this dupe.
So let's see how we did. The original cost $9.50 and with the two yarns and two ornaments
I was able to spend only $5 and that made each ornament only $2.50.
You guys know I love wreath making and this one that I saw on Pottery Barn's website
really caught my eye. The large one of these is $149 so I thought I would take up the challenge
and see if I can recreate it for much less. The first thing I did was pick up a grapevine wreath
and this one I picked up at Walmart and I believe it was just under $5. This is the smaller one of
the ones that they have in the craft section at Walmart. This one is the 12 inch size. Now I also
picked up these berry bushes from Dollar Tree. They carry them every year and as you saw already
I cut them up making each stem one individual pick so that I can insert it around the wreath
as you can see all the way around and I left these stems pretty long and I also spaced them out evenly
before hot gluing them down just so I knew exactly where I would place them. Now keeping these stems
long will actually create a much larger wreath if you do it this way so you can get away with
getting a smaller more inexpensive grapevine wreath if you do this. Now after you do your very first
round of berries all around the perimeter you're going to take your next set of berry picks and
you're going to go around and do it in the center and kind of bring those berries in a little bit.
You also want to insert them in between the picks that you have already put in your wreath
that way it starts filling in those spaces in between each pick making the wreath fuller. Now
after you do that second row you're going to go in and do your third row and just like you did before
you're going to focus on putting those berries in between the second row berries that way you
fill in those spaces. Now you want these stems to be a little bit smaller so that you can get
these a little bit more tight inside of the center of the wreath. Now the original wreath had lots of
different types of greenery and I wasn't about to go all out and get different greenery specific to Christmas.
I just basically looked in my stash and I found some of this greenery that was left over from my
summer wreath that I had on my front door that I did earlier this year so I just decided to
go ahead and cut those up and start inserting them throughout. So again another way you can
save money is just by using whatever you have on hand and it doesn't necessarily need to be
greenery like pine needles for Christmas because your berries are already the festive
big bright statement piece in your wreath. Everything else can just be supporting greenery.
Now the most important part here is to take that greenery and insert it in all of the areas
that need a little bit more filler and any gaps that you see that's exactly where you want to
place it that way the wreath looks nice and full and of course have that high-end look.
Now after I started adding my greenery I decided to go ahead and use the rest of my berry bushes.
I ended up using a total of 14 and then finally and just because I found them in my stash
I had these fern stems that I decided to go ahead and place them in there.
And then right before I was about to wrap up I did find some pine cones that I had left over
from my fall decor and I decided to go ahead and use those instead because of course they
are still festive for the season and the original also had some pine cones in it.
Now this step here is optional however I do think it's what takes the wreath to the next level.
If you've ever used any of these berries from Dollar Tree you know that they tend to pop off
and you get a lot of white foam poking through so in order to hide all of that I took some simple
red paint and just began touching up those areas where the foam was exposed. All I did was go
around the entire wreath looking at different angles so I can spot the different little areas
that needed to be touched up and that was it. Now let's see how this wreath turned out.
All right so let's see how we did. The original wreath was $149 and even though it's a little bit
bigger than mine mine did end up being about two feet wide which is a good size wreath. The only
thing I had to pay for was the grapevine wreath form and the berries everything else I had on
hand so I only ended up spending $22.50 recreating this look. Now these are called ornament fillers
on Ballard Designs website but they look like ornaments to me and they can totally function as
I love the beautiful white with the gold peeking through the surface but at $15 each it was a little
bit of a stretch and honestly all you need is some very inexpensive ornaments or some leftover
ornaments in your stash that you wish to update. I found this box for three dollars at my local
dollar store so I decided to have some fun and for this I'm just going to use some inexpensive
Waverly chalk paint from Walmart and I am just going to paint them all over. This paint covers
pretty well but I did give it two coats to make sure I covered the gold and I did try this on
two different kinds of ornaments just because I wanted to see how it worked out with these
different patterns. Now what you do need to keep in mind in order to do this you will need ornaments
that have raised surface patterns like this. Now I let those dry completely before I move to the
next step and what's funny is is that I thought I was going to be able to go over this with like a
damp cloth and remove the white paint to expose the original gold color underneath however this
paint was not moving it was not budging it stuck onto those ornaments and did not want to come off.
So the next best thing was to use Rub and Buff and I just put some on my finger and lightly rubbed
it all over the surface focusing on those raised areas so that I can bring out the pattern. Now you
don't have to apply this absolutely perfect if you do rub some Rub and Buff on other areas of
the ornament know that it is perfectly fine and it will actually give it a more vintage look.
Here is how they turned out. All right let's see how we did for these ornaments if I would
have only purchased two I would be paying $30.40. I paid $3 for a box of eight
and while I didn't do the other ones I still can and it's less than three dollars for four of them
and imagine you can do this with any color paint you want and just customize your decor this year
by doing this simple step. Now for my final look for less dupe I'm going to be recreating these
flocked glass tabletop trees and they're a very velvety surface and they're also have like this
little flocking to them slightly and they range from anywhere between $19 all the way up to $31
a piece but I figured we can recreate this for so much less. Now I went to my local Dollar General
and I happened to come across these. The tall one is only five dollars the medium ones are three and
the little one is one and they actually are very cute looking trees however they do look plastic
in person so I decided to use these in order to recreate these trees and I thought they were just
perfect. So I took some red and I just began applying it throughout the entire surface of
the large one. Now this is same Waverly chalk paint and I do think it does make a difference
to use chalk paint in this occasion and what I'm going to do here I'm going to give it a couple of
coats as a matter of fact I think I did three coats total and here you see me applying a second
coat. I really didn't want any of that silver to poke through the finish. Now I did let this dry
completely after the second coat. I wanted to make sure I had a nice bond on that plastic surface.
I did the same thing to the two medium ones and for the medium ones I decided to go with a nice
sage color. I just thought it would be so pretty. This one was a little bit trickier because the
surface on these were a little bit more complex so I had to make sure I got all those nooks and
crannies. Now after the final coat was dry I came back in and did another wet coat this time and
then on that wet coat I added baking soda and I put it through like a strainer or sifter and I began
to kind of just sprinkle it on top and then any extra that would fall on the table I'd pick back
up and sprinkle right over and you want to make sure you do this while the paint is still wet
because you want it to adhere to the paint and this is going to give you like that velvety textured
surface with that little bit of flocking throughout. Now you want to be generous with this and you just
want to get as much surface area as possible covered with that flocking so that you get the
most amount of baking soda that adheres. I do however give it a few taps before setting it aside
that way I can knock off anything that's too loose on the surface. Alright then it was up to removing
the excess baking soda. I did this two different ways. For the red one because I was still trying
to figure out how I wanted to do it I actually did this while the paint was still a little damp
and what I realized was is that some of the paint would kind of rub off onto the baking soda bits
and it actually gave it a much better texture than I thought and I could even reach down with
the foam brush and add more to it and it would stick on a little bit better in my opinion. For
the green ones I actually waited till it was completely dry before knocking off the excess
baking soda and what I noticed was is that sometimes there would be patches where it would
look like it didn't really have much baking soda at all so if I were to do this again I would have
them all be a little bit tacky to the touch while I'm removing the baking soda. Again I can add on
some more at the time because it's still tacky and for some reason it would just feel better
and look better and I just like the overall finish so just keep that in mind. Either way as you can
see here in this close-up you can still feel and see the velvety texture as well as the flocking
throughout so again either way it's fine it's just what you prefer in the end and I just think
this gives it such a beautiful texture. Now once you're done removing the baking soda that's all
you have to do. Here is how they turned out. All right let's see how we did on this last one.
If I would have bought one large, two medium, and one small one of the original it would have been
$96.80. Now as for me I only paid $15 and that was for the trees and some red paint as well as
some beige paint for the little Christmas tree. Everything else I had on hand. That is a huge
savings for the same look. Well that's it for today's video. I hope you enjoyed it. If you did
please make sure to give this video a like and let me know in the comments below which one of
these look for less dupes was your favorite. Don't forget to check out everyone else's videos
with the playlist link and I will see you back here very soon with another video. Until then, adios!
