American Genius Engineers Built Massive Asphalt Roads With Millions Of Recycled Car Tires

Metal Processing Technology Topic
7 followers
7 Video Views·Dec 22, 2025
In this documentary, discover how American engineers grind old tires into rubber, blend them with hot asphalt, and transform waste into high-performance road surfaces built for extreme loads and long-term use.
Every kilometer of this road contains thousands of tires
that once rolled along highways,
yet no one can recognize them anymore.
Each year, more than 1.5 billion used tires are discarded,
and they are extremely difficult to dispose of.
But in the United States, these tires are being crushed,
mixed into asphalt, and transformed from waste
into modern road surfaces.
Behind the black pavement that looks so ordinary
lies a complex engineering system.
Are you curious how discarded tires
can become the foundation of smoother,
stronger, and more durable roads?
Join Mandarin Tech as we explore
the full engineering process
behind recycled tire asphalt technology in the US.
Every year, the world discards
more than 1.5 billion tires,
a figure so vast that, when seen from above,
many storage sites resemble dark oceans
stretching all the way to the horizon.
Left in the environment, tires barely break down
and continuously release harmful chemicals,
turning parts of the United States, Europe,
and the Middle East into some of the most
severe pollution hotspots on the planet.
Yet this massive volume of waste
has triggered an unexpected turning point.
Rubberized asphalt, a multibillion-dollar industry.
Just one kilometer of road can reuse up to 10,000 tires
while also making the surface more durable,
more resistant to cracking,
and reducing traffic noise by around six decibels.
From a symbol of pollution, tires are now emerging
as one of the most promising,
sustainable construction materials of the 21st century.
Each day, within the quiet, steady rhythm of modern cities,
thousands of vehicle tires reach the end
of their service life at roadside garages,
maintenance stations, scrap collection yards,
and large-scale tire replacement centers.
Most of them have already exceeded safe limits
for tread wear, elasticity, and load-bearing capacity.
When left in the natural environment,
a single tire can persist for decades
with little to no decomposition,
while slowly leaching organic compounds and heavy metals,
becoming a long-term source of contamination
for soil and groundwater.
In many countries, a worn-out tire is worth
only a few cents when sold as scrap.
Yet from the perspective of the recycling industry,
it represents a true form of urban ore.
Inside every tire lies a complex blend
of natural rubber, synthetic rubber,
reinforcing steel, textile fibers, and chemical additives,
materials that can be recovered and reused
with significant economic value when processed correctly.
The collection process is typically organized
along fixed routes.
Specialized trucks, equipped with high-load platforms
and secure fastening systems,
gather tires from multiple locations
to reach optimal transport volumes.
This approach not only reduces logistical costs,
but also prevents tires from being stored outdoors,
where they can trap rainwater and become breeding grounds
for disease-carrying insects.
The recycling process begins with handling
the steel reinforcement embedded inside the tire.
This component is what allows the tire
to lock firmly onto the wheel rim
when traveling at high speeds.
But in a recycling line,
that same steel ring becomes the biggest obstacle.
If it is not removed first,
it can chip cutting blades, snap drive shafts,
and bring the entire shredding system to a halt.
At the first stage, workers feed the tire
into a specialized bead removal machine.
Inside, a hydraulic hook system
capable of generating enormous pulling force
digs deep into the tire bead
and uses brute mechanical strength
to extract the entire steel core
in just a few dozen seconds.
As you can see, the force is so intense
that even the thick rubber body of the tire
is violently twisted and deformed during the process.
On average, each heavy-duty truck tire like this
yields around two kilograms of high-quality carbon steel.
Once separated, the steel wires
are collected manually by workers,
compressed into compact bundles,
and then transported directly to metallurgical plants,
where they begin a completely new lifecycle.
Meanwhile, the remaining tire carcass
is now far more flexible
and ready to enter the next stage of coarse shredding.
Before mechanical processing begins,
the tires pass through a high-pressure washing system
that removes mud, oil residue,
and embedded gravel from the surface,
protecting cutting blades and crushing shafts
from premature wear.
This may seem like a minor step,
but it plays a decisive role
in maintaining the stability and service life
of the entire downstream production line.
In the primary shredding stage,
whole tires are fed into high-torque cutting machines,
where slowly rotating alloy steel blades
slice them into coarse fragments
measuring several inches across.
This low-speed cutting method minimizes heat generation,
preventing the rubber from softening
or sticking to the blades,
while shaping the material into a form
suitable for further processing.
The shredded pieces then move into secondary grinding,
where their size is reduced even further,
and the internal steel reinforcement
is mechanically fractured
and gradually separated from the rubber.
High-strength magnetic systems
recover the steel directly from the material flow,
turning this reinforcement
into a valuable stream of recyclable metal.
The final output is crumb rubber
with tightly controlled particle size,
stable enough to move on to classification or reuse.
At this stage,
the tire has completely lost its original form
and becomes a raw material ready for new applications
in construction, transportation,
and industrial manufacturing.
At the end of the production line,
all material passes through
a classification screening system.
Particles that meet the required size move forward,
while larger pieces are routed back to the grinder
for further processing.
Among these outputs,
the fraction ranging from 0.5 to 2 millimeters
is especially critical.
This is the exact rubber size
used to produce rubberized asphalt,
which we will explore next.
After crushing and screening,
crumb rubber from waste tires
still retains residual moisture,
fine dust,
and traces of impurities embedded within its structure.
These factors interfere
with how rubber interacts with hot bitumen,
preventing the mixture from achieving the bonding,
strength, and stability required
for high-performance pavement.
For this reason,
before it can be blended into asphalt,
crumb rubber must undergo
a dedicated drying and heating stage
to reach the ideal condition for mixing.
Inside the plant,
the rubber granules are fed into a rotating drying drum,
a large steel cylinder set at a slight incline
and kept in constant rotation.
Hot air, typically generated by burners
fueled with natural gas or fuel oil,
is introduced into the drum
at temperatures ranging from 200 to 260 degrees Fahrenheit.
As the material tumbles inside,
moisture is gradually driven off,
while the surface of each rubber particle
becomes dry and more chemically active,
ready to interact with hot bitumen in the next stage.
In modern production lines,
this process is tightly controlled
using temperature sensors and airflow regulation systems
to prevent scorching or loss of elasticity in the rubber.
Many facilities also rely on indirect heating methods,
keeping the rubber isolated from direct flame
to preserve the internal polymer structure of each particle.
As a result,
when the rubber enters the asphalt blending phase,
it can swell and absorb bitumen more effectively,
forming rubberized asphalt that is more durable,
more elastic, and far more resistant to cracking over time.
Immediately after drying and preheating,
the crumb rubber enters the bitumen blending stage,
where the true value of recycling is created.
Bitumen is heated separately in storage tanks
until it reaches a stable liquid state,
typically between 320 and 375 degrees Fahrenheit.
Ensuring proper flow
without degrading its chemical structure.
The crumb rubber is then fed into the mixing chamber
in carefully controlled doses,
with common ratios ranging from 10 to 20%
of the total binder mass,
depending on the technical requirements
of each rubberized asphalt formulation.
Inside the mixing unit,
heat-resistant paddles generate a continuous vortex,
forcing the rubber and bitumen into intense contact
for a sustained period of 30 to 60 minutes.
During this time,
the rubber particles do more than simply disperse.
They swell as they absorb lighter oils from the bitumen,
a process that increases the viscosity of the mixture
while significantly improving elasticity
and crack resistance.
These properties are especially critical
for road surfaces exposed to heavy traffic loads
and constant temperature fluctuations.
In modern asphalt plants,
the entire process is closely monitored
using viscosity sensors,
temperature controls,
and residence time management
to ensure uniform rubber distribution and prevent clumping.
Some systems also introduce stabilizing additives
to reduce phase separation during storage or transport.
By the end of this stage,
the rubberized asphalt reaches a homogeneous
and stable state,
ready to be used in asphalt concrete production,
where discarded tires officially become part
of a new generation of resilient road infrastructure.
Immediately after the recycled tire-based asphalt mixture
is fully blended,
it is discharged into specialized dump trucks
whose beds have been preheated
to prevent sticking or premature cooling.
At the time of loading,
the temperature is typically maintained
between 270 and 300 degrees Fahrenheit,
allowing the mixture to retain its workability
and self-leveling properties during paving.
Each truck leaves the plant along a carefully planned route,
heading toward a job site
where the construction crew
has already prepared the base layer.
Now comes the most important stage in building a highway,
laying the asphalt.
In modern infrastructure projects across the United States,
asphalt paving technology
that incorporates rubber from recycled tires
has advanced far beyond what it used to be.
Dump trucks bring in hot asphalt
kept at around 160 degrees Celsius
and unloaded directly into the pavers hopper.
From there, the conveyor system and augers
continuously move the material toward the back,
making sure the mix is spread evenly
across the full width of the road.
The real magic happens at the screed,
the vibrating, tamping, and pressing unit at the rear,
which can achieve 85 to 92% compaction
while the asphalt is still extremely hot.
This allows the layer to be shaped, compressed,
and smoothed in a single pass.
This method is especially effective
for the surface course or stonemastic asphalt,
which is only about two to three centimeters thick
and cools very quickly.
Using traditional vibratory rollers on such a thin layer
can cause cracks or ripples,
but with the automatic screed on modern pavers,
the road surface stays perfectly smooth, well textured,
and uniform along the entire stretch.
In the past, the process required multiple rollers,
vibratory, static, and pneumatic
to achieve the proper density.
Today, high-end asphalt pavers handle
more than half of the compaction work
inside the machine itself.
The Vogela pavers from the Vergen Group
are especially well-regarded
for their precision, material efficiency,
and their ability to reduce roller work
by 70 to 80% compared to older methods.
After paving, a light steel roller
may make one final pass to finish the surface,
though many projects skip this entirely
because the mat already meets standards
straight out of the machine.
Thanks to these new technologies,
the process of laying rubber-modified asphalt
made from recycled tires
has become faster and more uniform,
producing highways that are highly durable
and capable of handling heavy traffic
and continuous use for many years.
In this modern process,
a single machine handles both tasks at once.
As it moves forward,
the front nozzles spray a thin layer of bonding material,
the tack coat, directly onto the old pavement
using asphalt emulsion or liquid asphalt.
This layer acts like a glue
that helps the recycled mix
bond tightly to the existing surface
and prevents any slipping or separation
under heavy traffic.
Right behind the spray bar,
the same machine immediately places
the recycled asphalt mix onto the tack-coated surface
without any waiting time.
The paver then spreads the hot mix
to the design thickness,
while the screed vibrates and compacts it continuously,
forming a smooth and uniform layer
with the proper initial density in a single pass.
Once the asphalt has cooled and reached full stability,
the next step is applying the road markings
that guide traffic.
First, the crew uses laser measuring tools
or guide strings to determine
the exact position of each line,
lane dividers, stop lines, and directional markings.
After the layout is confirmed,
the specialized striping machine is brought in.
It usually applies thermoplastic reflective paint,
which is heated to around 180 to 200 degrees Celsius
to ensure maximum adhesion to the asphalt surface.
As the machine moves,
its spray head creates lines
with the precise thickness and width
required for highway standards,
while glass beads are dropped onto the fresh paint.
These tiny beads reflect car headlights at night,
significantly improving visibility and safety.
After just a few minutes of cooling,
the markings harden, bond firmly to the pavement,
and the roadway is ready for traffic,
completing the surface of the new highway.
The final step before completing the highway
is installing the concrete barriers.
These barriers are usually precast in a factory
before being brought to the construction site.
At the factory, each barrier is poured
into high-precision steel molds
to ensure all dimensions and angles are perfectly consistent.
After pouring, vibrating tables compact the concrete,
creating a smooth surface and increasing strength.
Once the concrete reaches full hardness,
each barrier is removed from the mold,
quality checked, and numbered
in the order they will be installed.
At the site, cranes or specialized forklifts
place the concrete segments
exactly where the plans specify.
Workers then secure them together
using steel pins or bonding adhesive,
forming a continuous and stable barrier line.
This precast installation method speeds up construction,
reduces road closure time,
and improves safety during highway maintenance.
After the concrete barriers are installed,
the engineering team conducts a final inspection
of the entire highway.
They check road smoothness, drainage performance,
surface traction,
and the structural quality of every section.
Each component is approved
only when it fully meets all safety and technical standards,
and only then is the highway allowed to open for use.
And so, what was once considered hazardous waste,
old tires, have been crushed, recycled,
and become part of modern transportation infrastructure.
Beneath the glossy black asphalt
that millions of cars roll over every day
lies a story of engineering, the environment,
and smart recycling thinking.
The information I've compiled is from various sources.
Please let me know if there are any errors.
See you in the next videos.
