How to Troubleshoot Ground Side Voltage On A 2014 Harley-Davidson VROD Muscle

Two-Wheeler Technology
5 followers
20 Video Views·Dec 22, 2025
How to Troubleshoot Ground Side Voltage On A 2014 Harley-Davidson VROD Muscle
AI Generated·May contain errors
Welcome everybody to another episode of Bill on Bikes. As of the recording of this it is January
14th, 2025. This will actually be my first video of 25 and I think this completes my first
full year on YouTube. I may have started a little bit before 24 but I don't remember the exact date
so we'll say it's the first year and you know I really enjoy doing these videos for you guys.
I don't monetize the channel. I don't intend to monetize the channel. I don't even know how
you do that. It's really for you guys that I do this so please like, subscribe and share it with
your friends. I'd appreciate it. I'd like to get more subscribers. I have a lot of exciting things
coming here in 2025. I'm really looking at purchasing a lot of new pieces of equipment.
I'm not going to disclose what that's going to be at this time but I really want to make it so
this shop can do anything and everything in-house where I don't have to ship anything out because
I am tired of waiting for flywheels and cylinder heads and things like this. I want to do it
in-house so it's going to be an exciting year and I'm glad you guys are going to be able to
go along for the ride with me. It's going to be fun. Anyway, what do we have here?
2014 V-Rod Muscle. Again, as most of you know, V-Rods are my favorite Harley-Davidson.
In my opinion, best platform they ever made. I know the jury's out on that. A lot of people
would disagree. They call it a Jappa Harley even though it's far from anything Japanese.
Mostly German with the Porsche and Harley collaborative on the design of the engine.
But anyway, I wish they'd bring it back but there were some rumors that maybe they were going to do
that in 2025. Again, it's just a rumor. It's not going to happen. They have the Revolution X which
again is very similar to the V-Rod but the engine doesn't look as good as you see here where
Willy G said, hey, we have to have fins on the heads. They don't do anything for cooling. This
strictly just looks to give it that more traditional Harley look is where the newer
liquid-cooled Revolution Max engines just don't look as good. Anyway, so what do we have here?
My good customer, Teddy. This is his fourth or fifth bike? I think fourth. Yeah, I think it's
his fourth. I have one customer that has 15 bikes. But anyway, his fourth bike, he just purchased
this, came up from Florida, brought it to me. Bill, just go through it. Let's see what it needs.
It needed a good dyno tune. It had the Dynojet Target tune in here but the previous owner had
so many downloads of different tunes that it was completely confusing the system and it ran
like ass to be honest. So I had Tom come out, we threw it on the dyno, spent at least three hours
on it, got it tuned, running great. I did my service, coolant flush, went through everything,
rear brake pads, whatever it needed. So I go take it for a test ride, runs great. Call Teddy,
he's excited. I pick him up because he lives near me, bring him to the shop. He goes down the road,
calls me about a mile later, Bill, I'm on the side of the road, I have no electrical power.
First of all, that's embarrassing. I think that is the second time that's happened to me since
2012 when I opened this place. It's just something that's not good. You don't want it to happen.
I'm not saying that I don't have a bike that comes back occasionally for a leak that I fixed
to where I didn't have to do it again for free. But for a bike just to leave you on the side of
the road, it's pretty much unheard of, especially out of the shop because I go through and check
everything. So I go down the road, pick him up. It took me two minutes. Come back to the shop
and I say, and you turn the ignition on and there is nothing. I'm like, you gotta be kidding me. So
I started asking Teddy, where's the bike from, which this is an important factor too. A technician
should always ask where the bike's from if you don't have a history of it. This bike came from
Florida. So instantly think of maybe some corrosion issues, things like that. And if you're in a
shop and you're only getting your information from the service writer or service manager,
that's not always good because it's like that old game when you were a kid and you'd tell,
you know, five different people to, you know, you start with one person and by the time it gets to
the last person, it's a totally different saying or whatever they said is just, just not right.
It's messed up. Same thing in the service department. Some of these shops are so big,
you never get the correct information that was relayed to the service manager from a customer.
And by the time it gets to the technician, it would be really helpful to get it right from
the horse's mouth. So I'd always like to talk to customers, but here it's easy because I'm a
one man show. I get it when you're in a big facility, but try to talk to the customer anyway.
So we have no power. I have pretty much stripped this down so we can get to all the electrical
components. We can figure out what's going on here. I am going to remove the airbox cover in
the airbox so we can get to the battery and I can show you how we're going to test this and
troubleshoot it and figure out what's going on. So I have my hot caffeinated beverage and I'm
going to reposition the camera and get some closeups going. We'll get the airbox removed. So
join me, shall you, as we repair this 2014 V-Rod muscle. All right, let's get the airbox off. I'm
going to take a little painter's tape here and put it on the forward portion of the airbox cover
because they've added a riser here and move these bars back slightly and the cover will contact our
odometer trip knob. So we want to make sure we don't damage the airbox cover at all and do our
latch here in the back. And there's two little rubber mounts that hold it in the front. A little
bit of a tight fit as it comes up here. We'll work it out. There we go. We'll set it over here on
our pad. Now we'll undo the latches on the air cleaner cover. We also want to pull up the coolant
tank here. The overflow reservoir, that just pulls out. Sits in a couple little rubber mounts.
Pop these off. We're going to remove by pushing down on this little bail clip.
Our intake air temperature sensor. And then there's a another retainer on the front of the
airbox here. Always go to the ground side because you don't want to take a chance of arcing out
against a positive battery pulse because the battery sits up on the front here. Remove that
clip and off with the cover. We'll remove our air cleaner. Of course, everything is nice and clean
here. Our K&N air cleaner, which I had already washed and red oiled. That's all nice and clean.
Now we're going to remove our velocity stacks. And you have the O-ring here that retains the
screws in case they become loose. And when I actually initially did the service,
they were just about ready to fall out. Someone had left them loose and the O-rings were up. So
that would have made for a really bad day because if the screws can get sucked into the
downdraft induction module, you're going to lunge the engine pretty quick.
So as I've said before on V-Rods, if you go back to some of the early V-Rod
videos, a five millimeter Boundhouse Allen is your best friend on a V-Rod. You'll find
you use it all the time. Also, guys tend to over torque these. That's something you don't want to
do. And if you want to get really technical when you're using the torque specs on a V-Rod,
everything is in Newton meters, not standard inch pounds. You can convert it, which I do all the
time, but it's nice to learn the Newton meters also. And you want to remember this is a tuned
induction system. So the shorter velocity stack goes in the back and the longer ones
in the front. Ratchet's hitting my puffy jacket. It's so cold down here today. I left my house. It
was 32 degrees this morning. I do not like the cold weather as you guys know. And we'll be taking
a trip here leaving Thursday for Nashville. Youngest has a hockey tournament and supposed
to be, I think the high is only supposed to be in the 30s. So old Bill will be freezing. We have
removed that. Now we can lift the air box and I like to push this rubber. It goes to the,
basically the EGR valve here to the back. So I pull this throat like that, take it out. And then
there's just another vent in the front. It's just a tube with an O-ring, which you can see right
here. Now it is important to put tape over the induction module. We don't want to drop anything.
And I also have a piece of rubber that is capped that I put in here. So we don't drop anything
down that vent. So we're going to put that in here. I don't have to worry about anything falling
in the rocker box area. And we're going to tape up our induction. This is just a good
precaution. We don't want to drop anything. If someone came along, I dropped something,
we flipped the throttle and right down the induction, it goes down the throat into the
engine. And that would make for a really bad day. And that would be a very costly mistake.
Okay. Let me reposition the camera so you guys can get a better view of what we're
going to do here. What I've decided to do here is give you a quick overview of the bike and
where certain electrical components are on a V-Rod. So just a quick overview. We have our
battery here that sits under the air box, our ignition switch, which I've already removed.
It mounts here. And I'll get into that a little bit while we remove that. Our maxi fuse. We have
two different fuse blocks on the V-Rod. You have one in the front here. This one's obviously the
fan relay, start relay, a couple of different 15 and 30 amp fuses. Then we go to the back system
relay, lights, ECM, parts and accessories, fuel pump, things like that reside in this one. We
have our ECM. We have our electrical connections here for the back turn signals and brake light.
And over on the left side of the bike, we have our turn signal module. Now you can see we have
our ABS unit sitting here in the back, solenoid connection here for the starter motor. Wire runs
down to the starter motor down here. And we have on a V-Rod, we have multiple grounds. We have
two up here, one on each side of the cylinder heads. I'll show you. I can get in there right
here and right here. You also have your main ground, which runs here to this little L bracket
that attaches to the front rocker. And then you have another ground that's underneath the bike
here. It's going to be hard for me to point it out, but it's in here and it runs to the other side
on the frame. So that's just kind of a basic wiring layout. Obviously we have our controls
and our speedometer and tack and that stuff, but, and the turn signals are actually built in
to the mirror stem on this model, which is kind of nice. All right, so let's remount the camera
and we'll get going on our diagnosis. So let's see what's going on here. I'm going to reach over and
turn on the ignition switch. And as you can see, we don't have any power. There aren't any lights.
This system is totally dead. So what's causing that? So let's turn off the ignition switch.
And the first thing you ever want to do on any electrical system is you want to make sure you
have a good battery. You want to make sure it's fully charged. You want to make sure the wires,
you have a good connection, grounded correctly. I already know this battery is new because
Teddy's old battery was actually leaking a little bit of fluid out of it. So we had to clean up some
corrosion on the rocker box here, and we put a new absorb glass mat battery in. So that will
work just fine. We know it's good. And let's take our multimeter, put it on volts and just see what
we have for battery potential. And the electrical system has to have a potential source of power.
In this case, it's our battery and we have 1293. So we're going to do next, we're going to do what's
called a voltage drop test. So we're going to keep our ground here connected to the ground terminal
of the battery. Hard here, these cables do this. And then I'm going to go all the way to the ground
here at the back of the bike. And that's not good because I'm literally showing voltage,
six volts here. So what does that tell me? That's telling me that I have a potentially,
most likely a bad ground in the system. Let's go over some basics of how an electrical system works.
So every system has to have a source, again, of electrical potential. So in this case,
it's our battery. You have to have a key switch on the hot side. Obviously, we have to have some
sort of fuse, fusible link, circuit breaker. All the old bikes back in the day had circuit breakers,
usually a 30 amp breaker. Then as the bikes became more sophisticated, years later, now we
all have fuses. These are called maxi fuses. In this case, it's a 40 amp maxi fuse. On some of
the newer bikes, we're already up to a 60 amp maxi fuse. And I'm also going to give you a quick
lesson on electrical theory. If you increase resistance, you're always going to decrease
current flow. Decreasing resistance increases current flow. And the only real source of
resistance in the circuit is the load. Any other source is unwanted, and it's obviously going to
affect how the circuit works. And you also want to know that all voltage will be used to overcome the
resistance in the circuit. So in this case, I'm showing voltage on my ground side. So using a
voltage drop test with the meter, which you saw me go to the ground side, we will work our way
back with the probe and try to find the source of resistance because something is taking voltage
from our current side. And we want to figure out what's going on there. All right, guys, I've raised
the bike up just to make it a little easier for us to see and for me to work. I have my ground on
the ground side of the battery. We have our positive probe here. I just want to show you
something. Now the ignition is off, and I have 12 volts at the battery, which we know, almost 13
volts. I'm going to go to the little ground Allen here that's on the engine case. And with the
ignition off, I have five, five and a half volts, 5.6. So that's a problem. Now let's turn the
ignition on. And I bet you we're going to have battery voltage down here on the ground side,
remember, look at that 12.86. You can see that 12.86. So that's a problem. That's telling me
that we have a definite issue here. Because as you remember, all the current should be absorbed
by the source. So let's say we have just a simple light bulb, two wires, power in,
ground coming out, the actual light bulb on the power side should absorb all that voltage.
And you shouldn't have anything coming out of the ground side. But obviously, we have
battery voltage coming out, going into our ground. So that tells me we have something going on in the
ground circuit, most likely some corrosion. I can tell you this, this has probably been a problem
from the get go. Because when I remove the plastic cover, which conceals all the screws here,
they were all loose. Also, if we look up here at our maxi fuse, which is probably hard for you to
see, but there's no insulation crimp, there's two core crimps, but they didn't do one core and one
insulation crimp when they did this. Because they probably changed out the connectors here,
most likely they had a corrosion issue again, like from Florida, maybe some corrosion. So
what I'm going to do is work my way back until I find the source of our draw. And
most likely it's going to be in the grounds. And I'm going to go check these two grounds up here.
Same thing, I'm still seeing battery voltage. Ah, now it's gone. You see that? If I go back to
this Allen screw, battery voltage. So what this tells me, I have a bad connection right here on
the front rocker box at that L bracket that comes from the battery. I'm going to clean that up.
And that should take care of our issue. Okay, let me show you guys another little trick I learned
years ago. And this actually can be good for you to carry, you know, probably a 12 gauge wire,
and maybe a couple of alligator clips on it to help you when you're on a trip. Because this isn't
the first time that I've actually had something like this happen. I had it happen to my own
personal bike. I built a custom bike for Sturgis one year, and I ended up having a ground issue
and figured it out with a wire like this. So we're going to take this wire here,
and we're going to go from our ground on the battery, and I'm going to ground this to the
engine. I'm going to leave the ignition switch on, and I bet you this bike's going to power up. So
let's see what happens here. Let's just go right to this rocker box. Look at that. See we have
lights now, and power. You see our lights lit up, and we have power. So I can confirm that
what I have here is a bad ground. Pretty easy. I've seen guys really chase the tail around on
electrical issues. This makes my life a lot easier doing these voltage drop tests. This
is something we've been doing. I think I learned this back in factory school and
sometime in the 90s. I've been using this for a long time. So we know we have a bad ground here.
We're going to clean this up, and it should take care of all of our problems. I just want to give
you guys a close-up of what I'm talking about here. So here's our issue. The bracket where it
attaches to the rocker box here is, it's tight, but you can see some corrosion here. So I don't
know if I can. I've actually got this to come on, and now I can't get it to go off. It just goes to
show you how intermittent electrical problems can be a real pain. It's always nice when the
circuit is out than when it's intermittent on. That can be difficult to find sometimes.
So that's what's going on. This is where our problem is. Everything's tight, but I can see
some corrosion. I'm going to try to move this. Yeah, I can move it a little bit now, and I can
actually hear a little bit of arcing there. So that's our source. That's our problem. The cable's
good, and we're going to tighten that up, and we should be all set. It doesn't look too bad.
Let's check out our bracket here and see if we can see any signs of arcing or anything like that.
You sure can see a lot of signs of this bracket arcing. Let me get close here. If you can see
that, you can see all these small little black spots, and it's even a little bit worn. That's
what's going on. So this was loose. It was tight, but it was a little bit corroded and
moving around slightly, and that's because of the arcing. So we'll clean this up. We'll clean
the rocker here, and we will reassemble everything. We'll test our charging system again,
and we should be all set. Got that all nice and cleaned up. I'm going to clean the rocker
here a little bit, too, if we can get in here. You should be able to. Still a little bit of
signs of burning there. I'll clean it up with a little sandpaper, I think. Yeah, this bike's
definitely a Florida machine. If I can get that torqued with Loctite, that should be good. 9.7
Newton meters. Let's hook up our ground. Okay, let's check it with our meter now,
and we should have zero, which is great, or a little resistance, which would be fine.
I think we have our electrical system issue licked here, so let's get it reassembled and
go for a test ride. All right, let's get our seat on. A little channel here that it slips into.
You ever notice that compressor always starts when I'm trying to talk to you guys? It's just
the way it is. Well, we're in an active shop, so anyway, we're all set here. I hope you've enjoyed
this video, how to do basically a voltage drop test. There's a really good automotive trainer
online. He's called The Trainer, and I've watched his videos also on voltage drop tests. He explains
it really well, probably even better than me, but not using, obviously, a motorcycle. He's in
the car world, but it's all relative. It's all the same. We're using an engine or the chassis
for ground. You know, we don't have an earth ground like in a house, so it's different.
So in the automotive world, that's how we do the test. I think we're going to be all set now.
This has the Akrapovic exhaust, so you guys can join me on a test ride. We're going to get it down
and take it for a blast and see how it runs. Let's start it real quick, though, just to hear
this exhaust and make sure everything's okay. Look at that. Ignition comes right on.
We should be good. We are in neutral. All right, let's fire it up. Don't you just love that sound?
Absolutely love V-Rods. Phenomenal, phenomenal motorcycle. All right, let's go take it for a
test ride. And that's it for our voltage drop test. I hope it's going to be helpful for some
of you guys at home trying to figure out electrical problems. One thing I didn't point
out on the V-Rod is it is a rubber-mounted chassis just like the FXRs and FLTs that started back in
1980, the Road Glide, Street Glides, all the new stuff. This is the three-point system. This one's
very similar to the Buell because it actually mounts off the top of the front head. There's
one rubber mount there. Then you have the two mounts in the back designed by Eric Buell. So
this is Eric's baby as far as the rubber-isolated system goes, which works great. It gets a bad
wrap sometimes, but that's a maintenance issue. It isn't anything to do with the actual design
of the system. I think it's phenomenal. I like the three-point better than the four-point, but
the new ones have the four-point rubber mount system, and that's just the way it is.
Please like, subscribe, share, and let's hope that 2025 is a great year. I'm going to bring
you a bunch more content. I'll see you next time on Bill on Bikes. Thanks for watching.
