Small but Perfect: Throwing Containers with Lids That Always Fit. Ceramic Jewelry Box

Ceramic Art Studio
35 followers
Dec 21, 2025
AI Generated·May contain errors
Today I'm back to containers. I'm making compact containers for things like pills, cosmetics,
sweets and I show you a super cute variation for jewelry. Once again I'll use my techniques
for perfectly fitting lids. So let's get started. So I start with about 400 grams of clay.
I'm going to start by showing you the basic container and then I'll show you how you can
I'm using a fine smooth clay that will make the trimming and finishing a little easier.
So easier in the sense there's no grit or grog to disturb the surface as I smooth and trim.
I think porcelain would be another great option for these containers.
So I've centered, pushed down and now I open up. I bring up the walls and I angle them
towards the center of the pot and I collar the walls inwards. I bring the top together
to create an enclosed form. Now with the trapped air inside I smooth the join and push down to the
flat compact shape. Now I trim away some of the supporting clay around the base. I've left
enough space in the sides for the flange and gallery. Now while the clay is wet I push in
to form the flange. I'm using an off cut of plastic tongue the kind electricians use.
And that's it. I can set aside to dry. Be sure to release the pressure building up inside the
form as the container dries. For this I use a pin tool at the base of the flange.
Okay I'm going to very quickly show you the variation for a jewelry box.
So I'll speed through the centering and now as I form the base of the pot and bring out the walls
I leave a little bit of clay on the inside to form a little ring holder.
So this will really work for rings, bracelets and necklaces.
And I form that extra clay into a little mountain peak. And now I can just bring up the walls
and close over as usual. So I'm ready to trim. I cut through at the base of the flange
and then I flip the container and tidy and compress the join. I set aside the lid
and I trim a gallery. I check that the lid fits. I tidy the inside a little and then wire through.
I flip the base and trim. So let's check on our variation. And then I go on to trim the gallery
and flange. So I want to show you something a little different today. I want to decorate some
of the insides of the boxes and have some tissue transfer that I think I'll use to create a bit of
extra pattern. I cut out some circles of the tissue transfer. Now there are two sides to the tissue
transfer. The brighter side has the underglaze and I need to lie that face down on the surface.
So the printed underglaze needs to be in contact with the surface. Using a flat brush I apply water.
I carefully brush water over the whole surface of the tissue transfer and I wait for the surface to
dry. It doesn't take long. The dry clay absorbs water from the surface of the paper. As this
happens the underglaze is transferred to the surface of the clay. Once it's dry I can gently
peel back the paper leaving the underglaze decoration on the clay. And now I bisque fire
the containers. Now I'm ready to glaze. I start by glazing inside. I wipe the gallery clean
and then I glaze the outside. First I dip the lid and then the base. I set together to fire.
Firing together ensures the lids fit really well. If they do stick together you can usually
release them with a tap against a wooden surface or gently tap two vessels together.
Canisters are some of the most useful objects I've made and there's endless room for
experimentation. If you want to know how to make taller canisters check out my original video
canisters with lids that fit perfectly and as always happy potting
