20 Textured Stamp Ideas - EASY TO MAKE STAMPS!

Ceramic Art Studio
35 followers
Dec 21, 2025
Hi everybody, this is Anne. As potters, we strive to make the most out of the resources we have
readily available in our studios. I'm sure I can speak for most of us in saying that one
well-accumulated resource we all have plenty of is scrap clay. In this video, I'll show you a
great way to recycle those scraps by making clay stamps. In fact, I'm going to show you 20 different
clay stamps and some exciting ways to use them. Now here are some clay stamp forms that I created
with some of my leftover scraps. I let these dry to leather hard and now they're ready to carve.
The first type of stamp I'll make is hand rollers. This particular one will be long enough to cover
my whole clay slab. With a pencil, I just began to draw different shapes. Some in the form of
simple flowers and leaves and some are just shapes. I used a fine carving tool to carve out each of the
Here it is all carved and bisque fired. I simply used my whole hand to roll the stamp over the
surface. Now I can find my favorite portion of the slab to cut using my stencil. One idea is to wrap
it around a mold to make a beautifully textured mug. The next stamp is more of the right size for
creating texture on just a portion of the slab. To create the texture, I just wrapped the string
around the blank then rolled it over the table surface to imprint the design. I removed the
string, let it dry and bisque fired it. It gives me this unique random pattern. I can see a lot
of possibilities for this design. It looks like wet sand lines or even grass in a meadow. I wanted
to see if I could create a more symmetrical stamp with simple undulating lines. I came up with this
design. I like that a lot. I could see that as a portion of a mug or I could even cut out a circle
which would make a great cup bottom. In addition to hand rollers, you can change the style of it to
accommodate any type of stick to hold on to as you roll your stamp. I started with a simple cylindrical
blank. I used the end of a long tapered paintbrush to poke through the center of one side. I then
removed the brush and repeated this in the center of the other side. Now when you begin to push the
brush through, it'll find the track from the other side and will give you a straight line through.
As the brush is tapered, I can enlarge the hole by sliding it to the wider part of the brush.
When it was leather hard, I began drawing just a simple vine and leaf design around the entire
wheel. After it was bisque fired, I tested it out. That'll make for a really neat border around a cup
or a bowl. Now here's another one I did where I combined carving with slip dots to see what would
happen. The slip dots add another layer of dimension to the surface. For another idea, I had a square
dowel rod that Jim carved along the top. I wanted to see what would happen if I created a roller
using that. Well that one's all right, but it didn't quite capture as much of the detailed
texture that I hoped it would, although it does make for a cool studded belt look. Let's move on
to the 360 degree rollers. These are my favorites. I simply rolled out a circular ball of clay. This
one's about an inch and a half wide. I marked each side of the ball. I then carved random lines from
point to point all around the stamp to get a wrinkled walnut look. Now if I roll the stamp from
end to end, I get a starburst pattern. If I roll it along the straight lines, I get more of a zebra
look. The beauty of these stamps is that you can roll them around 360 degrees to create textures in
a circular pattern. Let's try another one. This time I used the side of a pencil tip to create
these impressions in a random fashion. Here's the test rolled from point to point. It's almost like
coral from the bottom of the sea. That was really unexpected. I like that. Now I'm going to roll it
along the center of the stamp. Oh, it has a pine needle look. I tried one more with the flat end of
a dowel rod and then carved the diagonal lines into the corners of the squares. When I rolled it,
it gave me a cool blocked path of turkey tracks. I bet this would go over well at Virginia Tech
where the mascot is a huge turkey. I wanted to try one more. This time I created a small roller
that Jim dubbed the tiny nut roller. Here's what I got when I rolled it from point to point.
So cute, like little spiders. Now when I roll it along the center, it creates a nice picket fence.
We can't forget to create just straight on stamping stamps. I use my fingers to create this
shape, then carve the lines. By itself, I can create a pattern with it. I also made a small
leaf stamp as a companion to the bigger one. When I use them together, I can make a whole stem of
leaves. Jim calls this the poison ivy design. In this stamp, I just carved a simple swirl.
I also carved a more radial stamp using a paintbrush for the center, then carving lines
out from that. For fun, I carved this tapered line stamp. I can combine these stamps for some flower
designs. When I take the swirl and stamp the tapered stamp around it like this, I get a daisy
look. When I use the radial stamp along with that tapered stamp, I get more of a clematis flower.
I'm going to try and make some stamps I can use in patterns. I started here with a squared end
form and pressed a small shell into it. When I stamp it on point and line it up, I get this cool
beach theme pattern. The next one I shape with my fingers into a triangular form, then carved it in
the center. When I stamp that one with the edges lined up, it creates a star shape. I carved out
this fan stamp to make an art deco or a dragon scale design. Finally, I thought I'd do a couple
with more intricate carvings for appliques. Really, I just used the end of a paintbrush for one and
simple carved lines for the other. Now those are cute. Now when I cut them out using a bottle top,
I can add them as a center point to one of my vases. When we shot this video, we actually came
up with so many more variations that got edited out, so you guys wouldn't get too overwhelmed.
I challenge you not to just toss your clay scraps in a bucket, but use them to create your own
designs. Thanks to the newest members of our Little Street Pottery Research Facility team.
If you'd like to join the team and earn a title, click on the Super Thanks button or the link to
buy me a coffee. It also really helps us out if you hit that like button and subscribe to our
channel. We'll see you next time in the studio. I then carved random lines from point to point
all around the stamp to get a wrinkled walnut look. All right, I have to do that over again.
