In this video, I show you how to draw realistic skin using colored pencils in a side profile portrait. I share my layering process, how I choose colors, and my thinking as I draw, so you can apply these techniques to your own portraits.
In this video, I'm going to show you how
I draw a realistic woman's face in side
view using colored pencils. I'll show
you how I choose my colors, how I layer
them step by step, [music] and explain
what I'm thinking as I draw, so you can
use these techniques in your own
portrait drawings. [music] You'll find
the reference photo linked below the
video, and the full six-part series is
available inside the membership if
[music] you'd like to draw along with
me. Now, let's get started.
So I will start with the eye like I
always do. So I want to start with the
sepia and I'm just going to go over the
darker lines that I see. So with every
layer that you're going to build up now
you're going to use light pressure
because you want to be able to mix
colors and it's easier if you do that
with light pressure. And you also want
to make sure that you use that you have
sharp tip especially for the smaller
areas. I use an electric sharpener and
that's perfect for with these colored
pencils. I'm also going to go over the
eyebrow because once I start the shading
of the skin then I also have the eyebrow
hairs. This is the black. [snorts] Just
this darker part and the iris. It
doesn't look just brown, but So, this is
the sepia brown, but I think I'm also
going to add a touch of the burnt
sienna. And then you can see that the
eyeball white isn't completely white.
So, first with the French gray, 10%, add
a layer, light pressure. Every layer I
add, only with the final layers, I start
to use more pressure. And now I want to
add a touch of blue. This is the light
cobalt blue. I'm just glazing this blue
color. I'm using a bit more pressure
here where I see that it's more blue
just around the iris. See that? And I
think I can use the white now to blend
everything together. Burnt ochre. So
when I'm not sure which color I use, I
just mix and blend on the paper. You can
also do that on another piece of paper
if you want to be sure before you add it
to your drawing. But I just like glaze.
And let's say if I think, oh, this color
is way too red or orange. I could just
take the eraser and erase it and start
over. So yeah, I don't worry too much.
And that's why you want to keep on using
light pressure because you don't want to
because you want to be able to erase if
you need to. Okay. So the value needs to
be a bit darker. The color is okay like
this. Let's use the burnt sienna to make
the value a bit darker. And then I can
also darken the iris. You see that?
Okay. Yeah. Okay. So, looking at the
skin part around the eye, I usually
start with a lighter color. And I think
I'm going to use the brown ochre and the
burnt ochre. So, I'm going to mix these
two two together. Starting with the
burnt ochre because I see more pink
brown.
This is burnt ochre 10%. Starting the
first with the first layer. And I
usually go like this. You see that? A
small circular motion. Light pressure
cuz you want to build up the layers. And
we're going to add multiple layers. Here
you see a highlight. So try to draw
around that. And this is the time where
you need to be patient because colored
pencils take a lot of time that you
might want to use more pressure to
darken or you might want to start with a
darker color. But I think it's important
to take your time and build up the
colors. I'm going to only focus on the
part around the eye. And let's [snorts]
just use the darker the burnt ochre for
that crease below the eye. Let's see
this. Yeah, this is burnt ochre. Let's
actually also fill this in. You see this
darker? So, this isn't a line, it's
shadow. And here you see this crease.
You see how I use consistent pressure
the whole time? That really helps to get
a smooth layer. So with light pressure
and the circular motion, you really want
to train your hand to use light pressure
the whole time, like consistent pressure
above the crease line. So we're not
focusing on details. We're just focusing
on the values, the mid tones, the
shadows, and the highlights. And then
also focusing on color, which color at
the same time. So it could be a bit
tricky if this is if you're still a
beginner with color, but the more you
practice, you really will get better. So
there are two things to focus on. Which
value do you see? Is it a midtone? Is it
a shadow? Is or is it a highlight? And
then which color do you see? Now we can
use the brown ochre. And I'm just going
to start with the darkest brown ochre to
mix and blend. If you try to rush and
yeah, you will see that in the end
result. So this is really the time where
you want to be patient or have patience
and trust the process. So that's why I
always like to finish the part of the
eye first and then you have something to
look at and that looks more finished can
really motivate you to continue. So if
you're the same like me, always starting
a new drawing, I know that I will start
to enjoy the process later, but always
starting is oh okay, maybe tomorrow or
okay, I'm going to continue another
time. But what I tell myself is, okay, I
don't have to finish everything at once.
Of course, just sit down and start
drawing even just even 10 minutes. Just
fill in just add a few layers now and
then you can continue later. And once
you start drawing, most of the time you
end up drawing for a longer time than
you wanted at first because once you're
drawing, you're like in the flow and
then you just keep going. Okay, another
layer. Okay, just let's just add a few
more layers and then we can stop. It's
always harder to just start drawing
instead of continuing to draw. So, when
you're telling yourself, "Oh, I'm just
going to start tomorrow. Oh, I'm going
to do that later." Just tell yourself,
"Okay, I just need 10 minutes. Just sit
down, just a few layers, and then I can
continue the next time." That always
helps me. If you're thinking, "Oh, that
was going to take a long time to finish
that portrait." Yeah, okay. But you
don't have to finish it today, right?
Just
Start, add a few layers and the rest
will come because once you start, you
get that motivation to continue and to
keep on going. So starting is always the
hardest part. I think you can agree with
me on that. Okay. So now you see the
value we're starting to get there. Here
I need some darker value. So I'm going
to use the burnt sienna for this part.
Light pressure getting that darker value
in there, that shadow. And then once I
have I'm getting there with the values,
then I start to move on to the lighter
pencils to start to blend and get rid of
that white that white showing through
that textured look. You want it a bit
smoother. And that's where I start to
use the lighter pencils with more medium
pressure to blend everything together.
The burnt sienna looks a bit too reddish
brown here for this area. So then I'm
thinking what could I do to mix to make
it less red brown. I could use the sepia
to make it more like a neutral brown
color. I could also mix the brown ochre
but maybe it will get too yellow brown.
So I think the sepia or the raw umber.
Yeah, I think I'm going to add because
the sepia looks a bit too dull the
brown. So I think I'm going to add the
raw umber. Now this is the darkest raw
umber. And you don't want it too dark.
So just a really light layer. Yeah, this
is a beautiful layer. So if I decided to
use the sepia, then I just check how
does that look on the paper. I already
knew that could turn out too dull. But
you can try it out. Start with light
pressure and just glaze. And they think,
okay, this is turning out too brown. And
they try the raw umber. That's how I
decide and just see how that turns out.
If I think, oh, this color is turning
out like this like a grayish brown. If
it's not, if I don't get the correct
color, then I stop using this color and
use another color. But if you don't,
let's say you're going to create
something for yourself, a portrait for
now, you're following me. But let's say
you want to start your own drawing and
you you're not sure about your color
choice and you don't know and you don't
want to ruin anything with your drawing.
I would say have an extra piece of paper
next to you and then mix these colors
together to see you add the sepia on top
and add the raw umber on top. Check and
see which one you want to add to your
drawing. So that's how you learn. That's
how you practice without having the
feeling that you're going to ruin your
drawing. Just try it out to be sure.
Okay? So that you don't get the feeling
like, oh, which color do I use now?
Yeah, just try it out. Otherwise, you
won't know. And because I'm using light
pressure, I feel confident to just add a
color and glaze because I can always
stop with this color and just use
another one. I hope that will help you
whenever you're making color choices.
Oh, which color do I need to use now?
So, you see we used the burnt sienna.
Looked a bit too red brown. And I
usually use the raw umber to neutralize
a color if think it's looking too. And
because this is in shadow, I use the
darkest one. But you also have the
lighter raw umber, the 50 or the 10%
when we're we have the lighter values.
Let's use the raw umber 50% light
pressure. I'm also going to use that
color here. This color, the raw umber
50. And I'm also going to use it to
blend here a bit. Now I start to use a
bit more medium pressure. See that? And
then you get start to get a bit smoother
result. Not harder pressure yet. And
then I can also always decide do I need
to go darker or add a bit more color to
this area. So you see how this area
looks different in color than this area.
That's why I want to f you to focus on
each smaller area. I need a bit more
color here. So I want to use the burnt
sienna 50. The burnt sienna might be too
dark and too much color. So I'm just
using subtle glaze of this color to add
a bit more here. And also just a bit
here using light pressure. The more
layers you have, you feel you can feel
that you don't have to press hard
anymore just to glaze and add a color.
Let's use the burnt sienna to darken
this part. And let's blend this. Let's
see which color I'm going to use. I need
a bit more orange brown here. So then I
look at my swatches. I'm going to use
the burnt ochre, but then the middle
burnt ochre
50. and then blend over this also on
this side so that you don't get that
line. So you see how I blended the burnt
ochre, the brown ochre, the burnt
sienna, and then a bit of the raw umber
to neutralize a bit. Let's add a bit
here. I use really light pressure around
the edges because it's where you want to
continue and then blend and you don't
want any lines where you stop the
coloring. So really light pressure so
that you can blend that in later. I'm
going to use a darker burnt ochre
because I need a bit more volume here.
At first it looked dark enough, but then
I started to darken this shadow and then
you compare again. And then you see that
you can go a bit darker. That's how you
can always keep on comparing values to
other parts. Okay. Checking the color. I
think I can add a bit brown ochre now.
Brown ochre. The darker one. just to
blend here a bit so that it's not too
orange brown here. Okay, let's darken
the crease
with the CPM and with the brown ochen.
I'm also blending over this to get a
smoother result. Light to medium
pressure and checking if if the color is
correct that I don't need more color or
that I need to neutralize. I think it's
fine. Adding a bit more brown ochre
here. And let's use the sepia. Yeah,
this CP let's darken the hairs. You see
those smaller hair? I want to finish
more of the skin before we add that. So,
let's use the black to darken some
eyebrow hairs. I usually use the black
to darken, but I just using black can
also make the drawing look a bit dull.
So, you want to go over it with another
color like a brown or or the burnt
sienna. Okay, let's carefully darken the
lashes. This is a really tricky angle.
So, if you're struggling, I am too.
Don't worry. Just try to look exactly at
what not what you think you see. Look at
each lash separately. You see these
lashes? They go over the eyeballs and
then you see some shadow here. Here we
also see some shadow. I think I'm going
to use the CPM for that. So, keep on
looking back and forth. Again, what you
exactly as what you see here, the lashes
go up, but here they go bit curved
forward. This really light part and
darken the lashes here. So, it really
helps if you have a sharp tip for these
kind of details. And I also like to if
the tips turn out too thick, I want to
blend a bit over them with a lighter
color like this to make them look a bit
more natural so that they don't stand
out. And you also see that shadow so
that helps them help to create that
shadow. And with the sepia, I also like
to go over the black where it looks a
bit too black. I'm going to use the
craft knife because I want to scrape a
bit of this eyelash here. It looks a bit
too thick. try to make it look more
natural. And while I'm using the craft
knife, I can also use it to create this
highlight here. See if I have enough
layers. Yep, that worked. And then here,
this highlight is okay. And then here,
there's a smaller highlight. Now, let's
continue with the nose.
So, let's start with the brown ochre 50.
Okay. Now, I want to use the burnt
sienna. Burnt sienna. And then go over
the pupil. Not the pupil, the nostril
and the shadow line here. You see that
here is like an edge shadow.
But then here it's I'm going to really
gently see that it's not a line but more
like a shadow. See that? So just really
gently add. And then here this line it's
not that dark. Maybe also just really
light because you want you don't want a
line there. Like here you do see an
obvious edge for the shadow. This is the
burnt ochre 50. So we're going to blend
the colors together. That's the perfect
color for this skin tone. Like a mix of
the brown ochre and the burnt ochre, but
then in some areas a bit more brown
ochre and in some areas a bit more burnt
ochre. So that's why I focus on each
area separately. And then here, you see
that the skin isn't completely finished.
But I first want to connect everything
around it before I really like before
you really burnish everything. And you
don't want an outline here. There isn't
an outline on the nose because the nose
continues. If you create an outline, it
looks like it's like a block. So be
careful with outlines. You want this
line or yeah, outline of the nose to
blend in with the shading. So no darker
lines at the edges. Just carefully
define the edge a bit more, but don't
make it darker. Okay, let's check the
nose. Now, two things. Do we have the
correct color? Do we have the correct
value? The nose wing can be darker. I
want to add a bit more pink here to the
tip of the nose. That's what I see. This
is the burnt sienna 50. And then if we
have too much color, but I think this
will be fine here. See that? that purple
kind of brown color mixed with it. But
if it's too much color, then you can use
the rhomber to neutralize. Let's darken
the nostril. I think I'm going to use
the CPN to darken. And let's go over
this with the burnt sienna. And also add
this shadow below the nostril. Yeah, the
nostril. And let's darken the shadow
here on the nose wing. So you can look
at the reference photo, put the swatches
next to it, and I see that olive brown
green color. So let's add and I'm just
going to use light pressure. Olive
brown. Yeah, really light pressure. Just
see how the color turns out. If I don't
like it, I will stop and then use raw
umber. But I think this is a good color
to use. Okay, this is enough. Let's
start to move. So the I think the value
is correct. Let's start to switch to the
lighter colors to blend and mix
everything together. It's easier to get
an even layer and a smoother result if
you have sharper tip. See how
beautifully this colors blend in. This
olive brown color blends in. I'm
starting to use medium pressure. Blend
everything nicely together. And then you
can check like is the value getting
lighter? If it's too light, you can go
over this with a layer of the darker
values again. And let's also go over
this layer. And also while I color, I
turn my pencil every once in a while to
keep a sharp tip. So that's also a tip
because that might not be obvious, but
it's something I do automatically. See
that? I just turn every once in a while.
I'm going to add a few layers to the
forehead. Now, this is the brown ochre
50 with the sepia. I'm going to go over
these sketch lines because I want to
keep them when I start the coloring and
the blending here. So you see how I hold
my pencil a bit more like I draw like
this. But when I shade also with colored
pencils, I hold my pencil a bit more to
the back, especially with larger areas.
And then I keep turning my pencil every
once in a while. And I try to use
consistent pressure. So when you're
going to color in a larger area like
this, try not to rush and add all of
these back and forth strokes. You will
see that in the end result, you want a
smoother smooth result like this. Let's
use the burnt ochre 50. And then we can
check the color and the value. I might
need to go darker, but by building up
these layers with more layers because if
I just use the darker brown ochre and a
layer of the darker burnt ochre, then I
still see a lot of that paper showing
through because you just have two
layers. So that's why I like to build up
the layers with multiple layers of color
pencil so that you get eventually get a
smoother and even result. So this is the
reason I like to use Bristol smooth
paper because if you use paper with
texture, you will need to fill in more
of the tooth. And you can also see that
the more layers we're adding now, the
layer gets smoother and smoother. So
again, keep your hand pressure consist.
Great way to practice this way. And if
you feel that your hand is getting
tired, just take a short break to
continue another time. Okay, I want to
darken now. So, I'm going to use the raw
umber and then see how that goes. And
then see if I need to add some green or
yeah, the olive brown. And the olive is
a greenish brown. You're just glazing
this color, trying to darken the value a
bit. And then we can check to see, you
can check the color. Do you need more of
the orange brown? Do you need more of
the red brown? Or maybe the purple
brown, the burnt sienna? And then you
can just lightly glaze one of those
colors. And all of these colors together
will create this beautiful skin tone. So
if you're not sure how to look at the
different values and haven't been
drawing with graphite or charcoal yet, I
would advise you to learn the values
first. I think that's more important.
Okay. Make sure that the edges are light
and blended in. Now, I'm looking at this
area. I see more red brown. You see
that? So, here's where I'm going to add
more burnt ochre, more orange brown. I
think mixing more colors make the
portrait look more realistic than just
you choosing two colors and add that. I
think the more layers, the more colors
you add really gives an interesting look
to the pencil drawing. This is already
the fourth layer. I might add five and
six. So you see how many layers are
added to an area. So when I was a
beginner, I just added two, maybe three
layers. And then I always thought, why
does my drawing still look so so flat?
How can I get that 3D effect? Why is
that so hard? I didn't know. And I also
pressed too hard. So with three layers I
already had a really smooth nice finish.
But then I thought, okay, I didn't know
that the more layers, the more realistic
and natural the drawing will look. So I
used too much pressure in the beginning
because I quickly wanted to fill in the
You see this? You naturally want to make
that smoother. So you want to press
harder on your pencils and get that
smoother result. And that's what I did
on the second layer or maybe the third
layer. And then I thought, oh, okay, but
now I can't layer anymore. But it's
important to go through those beginning
mistakes because that's how you learn.
So it's important just to start
somewhere. Just start. Just draw and
then you can look yeah at some helpful
tutorials or follow my drawing videos
and then it's your turn because you need
to start drawing. You I can tell you to
use light pressure, but you need to feel
that for yourself. You need to add these
layers yourself and you need to use
consistent pressure the whole time. I
can't do that for you. So, I can tell
you, I can explain the steps and the
techniques, but you have to do the
practicing because if your hand
naturally wants to press harder, you
will need some more practice to be able
to draw consistently at consistent
layers. So, that's where it comes down
to practice. You can learn, you can
follow, but then it's all about
practice. Also, making mistakes,
learning from your mistakes. It's all
part of the process. And also maybe
using the wrong color and then you
notice, oh, this is turning out too
yellow or too orange, it's okay. But
because you use light pressure, you can
still change the color. So, if you're
scared to pick out your own reference
photo and start drawing from that, try
not to, yeah, hold yourself back. If you
feel like you're not ready yet, make the
mistakes. Learn from that. That's how
you learn. You don't learn if you stay
in your comfort zone and tell yourself,
"Oh, I'm not ready for that. Oh, I can't
do that yet." No, it's about telling
yourself, "Okay, I'm not ready yet, but
I'm going to do it. I'm going to learn.
I'm going to practice." So, you start
with light pressure and then you slowly
use more pressure to to mix the colors
together. So, you see how each area has
a slightly different color. Here it's
yellow brown. Here you see more purple.
Yeah, not purple brown, but I think I'm
going to add a bit of the burnt sienna
here. Here you see more of that green.
And I think adding those different
tones, different colors will make your
portrait look more interesting. Then
filling it all in with the same color.
So if the skin was a bit too yellow
orange, add a bit of the burnt ochre. If
it's too orange, add a bit of the brown
ochre. So, check your skin tone. Compare
it to the reference photo. See how it's
turning out. I'm going to start coloring
here with a layer of the brown ochre 50.
And I'm going to color around
the highlights. So, I'm going to try to
leave that part. So, here you can really
compare like how the first layers will
look compared to the more finished
layers. What a difference there is. So
again, I'm going to do those steps
starting with the middle colors. So this
is the brown ochre 50 and then the burnt
ochre 50. And then I start to slowly
darken so that I have the correct value.
And then I check where is it more yellow
brown, where is it more orange brown,
where do I need to add a neutral color
like the raw umber. And that's how you
continue by keep on checking the values
and the color. Okay, now [snorts]
looking at the pink. This is the one I
want to add. And the pink on its own is
really bright, saturated, but we're just
going to glaze a light layer using light
pressure. Also a bit up here just to
match the pink. So just looking at the
reference photo, seeing where I see
touch of pink where I can add it. So you
can feel the more layers you have that
you can add a bit more pressure. So,
let's start with the burnt sienna for
the top lip. This is the burnt sienna,
darkest one. Okay, the rest is pretty
light. So, let's use the lighter one.
This is the burnt sienna 10. And I'm
going to fill in everything. And I'm
also going to go over this layer to
blend. And now we need some pink. So,
let's use the anthra quinoid pink for
those brighter parts here. And now,
let's darken the top lip by using the
burnt sienna again. Let's use the red.
This is the russet just to add a bit
more of that color. And then the burnt
sienna 50. Let's see how that turns out.
Cuz I needed a bit more color than I see
with the burnt sienna. I think we can
add the pink again. So, let's use the
pink anthraite pink. And then I'm going
to use the lightest burnt sienna. Burnt
sienna 10. And then blend this all. And
here I colored the edge. And the edge
isn't dark. So, I'm going to use a stick
eraser and correct this because that
shadow is only towards only up till
here. And then with burnt sienna 10
again. And let's use the white here, the
white pencil to add this highlight here.
It's more it's brighter, but I want to
do that later. Here on the inside is
also bright. Here, let's add this
highlight. I'm using more pressure here.
And here's also some highlights. I'm
going to start the coloring around the
lips. And then I can always go back
adding the crease line back again
because if you add the shadow around it
then you it makes it easier to look back
see if you have everything the values
correct on the lips and then those final
details. I'm going to do that later.
Also you see that in the eyes. I always
do that in one of the last steps. Let's
darken the corner here. This is the
burnt yellow. Darken the shadow just a
bit. This highlight is like half of it.
And then here there's more shadow. And
let's use the burnt sienna 50 to blend
this a bit. And I'm adding a bit back
and forth strokes to create those
texture that texture in the lips a bit.
I want to use the brown ochre 50. Start
the coloring here and continue this part
here. So I'm going to finish this and
then we can move on more to the area on
the right. Look at the difference
between the first few layers, the ugly
stage that you need to go through and
then the more finished layer. Okay, now
let's use the raw umber mainly here and
here. The darkest one. This is the raw
umber. Starting here. Yeah, we need to
blend that shadow line to really have it
continue. So, try to be patient. Try to
keep on just layering with this slow
process. I know it's slow. I know I also
want to finish my drawings more quickly,
but you will see it in the end result if
you rush. Trust me on that and you will
be glad in the end if you kept your
patience and you just kept on going
layer by layering. So that's why I say
take your breaks. Okay, so we need
darker values here as well and just
slowly building up the layers. Okay. So,
after this, I'm going to use the raw
umber to neutralize the color a bit. And
then I see more yellow brown. So, then
I'm going to use the brown ochre. And
then we can check the colors. So, once
you have your values correct, I think
this shadow color is looking dark
enough. And another tip that I can give
you is make a picture of your drawing,
turn it into black and white and compare
it to the black and white version of the
reference photo and you can check values
that way. So look at this shadow, see if
it's dark enough. If it's not, you can
darken a bit more. If the values are
correct, then you can next focus on the
colors. Let me show you this real quick.
Like this one, this yellow orange skin
tone. It's actually like the one that
we're coloring now. Green more greenish
shadow colors. And then if you have more
pink there, you will usually see blue or
purple shadow colors. Here also this one
more green shadow color. And then here
you see more purple brown. Yeah. So I
always I always think that's
interesting. Instead of just using
browns, pinks, adding an interesting
color like the green, blue, or purple
will really add a nice touch to your
portrait and give it a more of an
interesting look. Because even though
you think, okay, we don't have green in
our skin tone. If you look at your hand,
you might see your veins, the color of
your veins are usually more green, blue,
or maybe purple depending on your skin
tone. So that's why that's interesting
to add. And also if yeah the environment
like where you are which in the room or
outside the light the lighting can also
give your skin tone a bit of a different
color or reflected light that's maybe
shining on to the face. I'm actually
going to add this green or yeah this
olive brown greenish color. And I have
more layers now. So, I'm just using, you
can feel that the more layers you have,
you just need to use really light
pressure to glaze slowly, layer by
layer, getting there. And if you look at
your drawing now, remember how far
[snorts] you've come by starting with
the first few layers. We still have a a
way to go. We still need to add the
hair, of course, and focus on smaller
details, but yeah, the more you
continue, the more you can be proud of
yourself. Look at your drawing and see
how it's coming to life. Starting with a
blank piece of paper, look at how
beautiful your drawing is coming
together. And remember that you're
creating a unique piece of art. So if
you're comparing it too much to the
reference photo, try not to do that.
This is still a colored pencil drawing.
You want it to be you don't want it to
look like a picture. It's your unique
piece of art, a colored pencil drawing.
And try to look at it that way instead
of comparing it too much with the
reference photo, which is a picture. But
this is your drawing. That really helped
for me because when I was a beginner, I
thought, okay, I want my drawing to look
exactly like the picture. But exactly
like the picture. You're not a computer.
Yeah. Depending on the medium that
you're using, you want to see if you're
using colored pencils, you want to see
that you've used colored pencils. That's
the thing here. And for example, if
you're using watercolors, you want to
see like the beautiful medium and the
beautiful texture that the medium that
you're using gives. Still want this to
look like a drawing. Okay, now we have
more of that orange. Perfect. So now I'm
going to focus on each smaller area
again at a time. Starting here with the
part around the eye. So I'm blending the
yeah in between the eyebrow. Okay. So
check that. I got it a bit darker, but
need to be careful that it doesn't get
too dark. So at this stage I want to get
rid of the white of the paper showing
through. Make everything smooth and
blended together. You see here that
white of the paper showing through here
on the nose as well as the forehead
still. So you see how this is already
looking smoother. That's what we do with
the lighter pencils with the brown ochre
10 because here it's more yellow orange
brown and the raw umber is more grayish
brown. But I added that here and here
because you see that that's also what I
see in the reference photo. And then
here it's lighter. So let's use the buff
titanium. If it's like a beige light,
then I use the a lighter color but then
not white, then I use the buff titanium.
That's a perfect color to blend. So,
we're burnishing the layer now to make
it smoother. You don't have to use a
really hard pressure. I never press too
hard that my hand starts to hurt. That's
just harder pressure, but not too hard.
Yeah, you don't want to damage the
paper, of course. So when I say harder
pressure, try not to press too hard. But
yeah, you will feel that you can add a
bit more pressure. And I then I see a
line here. You see that? And it's more
like this. So with the raw number 50,
let's lower this shadow. So I color
below that line. See that? And now you
have blended it. If you have a line
somewhere from a shadow that you don't
need, carefully color below it to blend.
And [clears throat] now it's blended.
Make sure that you have a smooth
transition here. Not a harsh line. And
here I So this was the ramber 50.
Let's see maybe the burnt ochre 50 to
blend that color nicely. So where
there's shadow there, darker layers, you
can use the med the 50s with a bit more
pressure. Look at that difference. So
you see adding layers really matter. And
if you look at your shadow and you need
it a bit darker, you can use a bit of
the sepia if you need to. I actually see
two birth marks here. Let's use the
sepia or the raw umber, the darker one
actually. Let's try that. Going from the
mouth up here and then here because you
want to blend in these blend no with the
raw number 10 here where it's lighter.
blend over it to have it blended in more
or that part with the bra umber 50
again. Continue the coloring here.
Create that bright highlight in the iris
that I see here like a ring. I'm just
going to create a highlight like that.
We can once the paint is dry, I can go
over that here in the eyeball white.
It's also a bright highlight here in the
corners. So, this highlight turned out a
bit too big, but I'm going to go over
that here. It's bright. I'm going to add
a bit highlight here in the eyebrow. See
how that goes. Wait for it to dry and
then I can go over that again. I think
I'm going to add these highlights like
this, but then dab with your finger real
quick so that it's not too bright. So,
if it isn't that bright again, you can
carefully go over that with the pencil
here in between the lashes. I might go
over this a bit. Okay, let's see the
lips. So, I'm looking at everywhere
where it's brighter. Okay, once it dries
that it gets less opaque, so it dries up
a bit lighter. I'm actually looking at
the eyes here. That's too bright. Okay,
let's finish the mouth and then we can
or actually I want to use a bit of the
blue to add that here to the eyeball
white. And let's use that blue to go
over the highlight here. Kind of see
like a bluish reflection on the iris.
The inside of the mouth is where I see
this highlight. So, you see how this
really these final details really make a
difference. I went a bit too high with
this one here. But then I will wait for
it to dry and then use the burnt sienna
to go over that. Let's use it here. Look
at that texture that you see. It's
really bright here. Then we can go in
between this with the burnt sienna
again. So here it's less bright, but
again we can color over that with a
pencil if we need to. So now let's go in
between these highlights. So you see how
actually let's use the this line. I want
to blend it a bit more. This is the
burnt sienna attempt. Blend it here.
That's better with the burnt sienna. I
want to go in between those highlights.
Create a bit more texture and some
crease lines where you need to. Just
some texture lines here. With this hair,
I only see black and a lot of
highlights. So, I'm not going to start
with a lighter color. Usually, I start
then with the sepia, for example, with a
dark brown. if I see lighter parts in
the hair. But this case, I'm just going
to use the black. So, I'm going to color
like in a circular motion. Look at the
curls and the direction that the hair is
going. And then where I see some
highlights, then I might color around
it. But for those smaller highlights,
I'm just going to fill it in. And then
we can always use the craft knife or I
might use the white marker because you
can also see some really bright
highlights. Especially here, you really
see the light shining on it. Really
bright. Just as bright as the highlight
on the lips here where it's really dark.
I'm just using more pressure. Just
adding a layer. Okay. So, the the first
layer of the hair will look ugly. This
is the first layer that you need to go
through. The ugly stage
just like with the skin, but just keep
on layering and you will make it look
like hair later. Okay. I'm using more
pressure filling this all in with a
circular motion to create those curls.
So you see how adding the sepia to the
black makes it gives a bit more color.
But we need to darken the hair some
more. So next with the black again. So
sometimes it helps to see the process of
an artist of someone else because
usually you just see the end result and
you think how do they make it look so
realistic? But you don't know. And then
you compare it to your early stages of
your drawing. And then you think, but
why does mine look mine look like Yeah.
not finished yet or like a cartoon. You
need to keep on going. You need to keep
on adding layers, especially with
colored pencils. A lot of layers are
needed to create a realistic result.
Okay. Again, in a circular motion to
keep that texture, the curly texture.
Now, let's use the white to blend those
lighter areas. Okay. So, I'm going to
use the black again and darken, but
going around those highlights. So, I'm
going to be a bit more precise now.
Looks still looks too doesn't look
natural yet. So, let's use the marker
and let's slowly look at each area. And
this is way too bright, of course, but
we're going to go over this. You could
have also colored around these brighter
parts, but yeah, it's more difficult to
do it that way. So, that's why I do it
the other way around. I fill in
everything and then create the
highlights. And usually with hair, I use
the craft knife, but because this hair
is really dark and the highlights are
really bright, this works better. So,
look at how bright this looks. Funny,
but trust the process. We're going to
make it look better. I want to create
these flyway hairs. Just a few of those
messy hairs. Let's also draw these here
on the forehead. Let's do something
about those highlights. Let's see. Maybe
with the gray or with Let's try the blue
first. See how that turns out. And if
you use too much pressure, you could
also scrape away that because this is
acrylic paint, the white marker, you
could accidentally scrape away a bit.
That's okay. So, try not to use too much
pressure. Yeah, the blue is fine. So,
I'm going to go over all of those
highlights because they're not
completely white. And I go over the
edges of those highlights a bit to Yeah,
you say that to soften them and make it
look like it's part of the hair and not
just some random spots on top. So you
can gently just color over it to make
the edges look softer. That really helps
to make it look more natural. Darken
this hair a bit. Where the highlights
are too bright, I also gently go over it
with the black just really light to make
it more grayish. See how that really
helps? Look at these spots here and how
these look a bit more blended in with
the hair. See, I need a bit more clumps
of hair. So, if you have all of those
individual strokes, it looks too neat
and too fake. We need to make it look
more realistic. Adding more clumps of
hair. And with the eraser, this is
drying. I'm going to go over these
again, lightening them a bit more. Okay.
Okay. So, you see that those highlights
are still there, but just really subtle
here. Bit less bright. You also don't
want to make it look like gray hair.
Yeah. Okay. Here the highlights are a
bit too bright. A bit more darker here
in between. Darken if you need to. I'm
going to work on the neck. And then we
can always go back to Yeah, I might need
to darken here a bit. Not sure. And I
might go back to the hair also just for
some final details and focus on the
colors you actually see instead of that
just thinking okay I used this color for
the face let's just use this and then I
need a darker brown for the shadow and a
lighter brown for the highlight. That's
yeah your portrait won't look as
interesting instead of using multiple
different colors. So, at the last, you
want to squint your eyes and make sure
that you have the darks dark enough,
like all of the shadows everywhere and
all of the highlights. So, I'm making
sure that this is all blended. And it
looked like this area was a bit darker
than the rest. So, I'm adding some more
here, but not too much. So, now with the
raw umber, I'm just slowly comparing the
shadow on the neck to the rest here. If
I need it darker, if I need more color.
This is French gray
10. Yeah, 10% the lighter one. So, let's
just look at the mid tones now. And just
this doesn't have to be really precise.
Just let's actually use the sepia 10.
And then you can blend over this with
white cuz you can't really blend with
another color to layer some more because
yeah, this is just the color I want to
use. So, you don't see any other colors.
Then you can just use the white. If it's
a warmer color, you could use the buff
titanium, but I think I'm going to just
blend with the white to make it all look
smoother. Okay, let's see where we can
darken. Going to use the CPA 10. So,
here we can darken. So, we have it all
smoother. Now, you can darken for the
shadows. And then after this step, I
have everything complete. But then I
take a picture and then I look at my
drawing. Yeah. From a different angle.
Like you can also even turn your picture
upside down. You can turn your picture
into black and white. Check the values.
Also, turn your reference photo into
black and white. Really check and see if
you have everything satisfied with
everything. And then you can focus on
the details. Look for the highlights.
We're almost there. And what I want to
do now because it looks a bit more
cooler the color cooler gray. I'm going
to use a light cobalt blue is add a
touch of this bluish tone to create a
cooler because the sepia is a bit warm
brown. And I see a cool gray. You see
how this bright blue makes the colors a
bit look a bit cooler instead of too
warm. Okay, let's use the white. Then we
need to define that the chin is on top
of the shirt. So we need to define that
the chin line again. And then don't just
add a line but blend above it. And so I
want to add this color all Yeah. to the
whole cheek to make it more like it all
belongs to each other. Maybe here a bit
more color. Also a bit here where the
highlight isn't that bright. And really
light pressure. And here these hairs I
want to soften them blend them a bit.
So, what I'm going to use is the raw
number 10. I think I already did this,
but again, blend these so that they look
like they're coming out of the skin.
What a long process from blank paper to
to a piece of art, a full portrait. Now,
I'm checking again and seeing if I see
anything. I remember starting with the
eyes, challenging a bit, but now I'm
looking at the rest. I don't even see
that anymore. I don't even remember that
challenge. When I look at this
highlight, I still see that it looks a
bit a line here still. So, with the
burnt sienna 10 to blend higher. So, I
blended below the edge, but now I want
to blend above it. Yeah. And then with
the acrylic marker, think adding those
brighter highlights a bit lower. You
know, like these spots. Yeah. Now, I
don't have a line. And here also a bit
more. That highlight also continues a
bit here on the cheek. Okay. So now I
don't have that line. I added that
highlight a bit lower. But now I'm going
to use the buff titanium and make it
less bright. Color a bit over it. Okay.
So I hope that helps you. So you can
critique your drawing. If you see any
edges or lines that you don't want,
color below it or above it. Blend it.
Have it all nicely blended. smooth
transitions.
Okay. So, I zoomed out so that I can see
everything. Yeah. Better. So, that's
what I mean. If you stand up, you look
at your drawing bit more from a
distance. I want to color in this a bit
more than black. So, the final touches
that I'm doing that maybe your drawing
is already finished. I'm using the brown
ochre 50. Add some detail here. So you
see that you when you look at your
drawing from a distance, you can see you
can critique the highlights better and
the shadows. See if anything stands out.
So then I see this part. I think oh it
stands out a bit too much. Using the
burnt sienna 10 to add a bit more pink
here. So you see those flyaway hairs
that really help to make the hair look
more realistic. Maybe with the stick
eraser lighten some even a bit more.
This is the sepia. a bit over some of
the highlights.
Thanks so much for watching. I hope this
video gave you some new ideas for
layering and coloring in your own
portraits. If you want to learn more and
follow the full six-part series, you can
join the membership. [music] Inside,
you'll find all the video lessons, the
material list with all the colors I
used, the reference photo, and my sketch
outline. [music]
Feel free to leave a comment if this was
helpful and if you'd like to see more
portrait tutorials like this. And I'll
see you in the next video.