How to Build a Small DIY Pond with Waterfall (Perfect for Wildlife & Fish)

Fix & Flourish
8 followers
4 Video Views·Dec 20, 2025
Hi, thank you for letting me share this with you. It's our small tropical jungle inspired garden
pond. It's got its own water feature with water trickling over mossy rocks and this underwater
world has become home to a whole host of creatures. We've had tadpoles that have grown into tiny
little frogs, a shoal of UK native minnows and even a pair of rare fancy goldfish.
The pond has been hugely inspired by the jungle so we've tried to create a tropical look and this
is the space that we've started with. Our hard work and attention to detail hopefully has paid
off and in this video I'm going to show you every step that we took to create this small
tropical inspired garden water feature. Now our garden is very small and this area was originally
a gravel bed for our dog to use but she loves watching the water from a riverbank and to be
honest so do we so we thought we'd like to add a pond. Now as I say available space is quite
limited so we had to keep it small and compact and the first step of this DIY garden pond project was
to remove some of the gravel to reveal the layer of weed membrane beneath. This wasn't a surprise,
we built this so we knew it was here. So for this project I've decided to use a 120 litre pre-formed
pond that we found online and I'll put a link in the video description. This is exactly what we were
looking for, it's the right size, it's got different depths which is perfect for planting and wildlife
and there's even a wildlife ramp pre-formed into the shape of this pond to help things like
newt and frogs find their way in and out of the pond. So here I am just putting the pre-formed
pond into position to check its size and I think it's the perfect fit. So now we're ready to cut
the weed membrane and to do this I used a sharp blade and just cut through the membrane from the
outside edges inward so that I could peel the membrane back. Now there were some metal hooks
or pegs that were in the way that I used to pin down the membrane but it was so exciting to see
that bare soil beneath because it's just full of potential. Now if you subscribe to the garden you
know that we're on heavy clay soil so it's going to take quite a bit of work to dig this out but
still so much potential here at this stage I was getting really excited. Now chances are you're
creating a pond using a DIY pond liner or a pre-molded pond like this and you've already
got bare soil so you won't need these first few stages. But now that I've got down to bare soil
it's time just to second check that I've got enough space here to sink in this pre-formed pond
and then I just use my spade to mark in the ground a rough guide of the shape of the pond
just following the outside edges here so that I knew what shape and size to dig and one silver
lining of gardening and heavy clay is that it holds the marks that you put in the top of it.
So now I was ready for what is probably one of the most exciting parts of building your own
DIY garden pond, it's breaking ground and digging the hole. It's the most exciting part but also the
most physically tiring but thankfully I have the dog here to help me out as you can see she's very
nosy and after I've dug part way down I'm just checking the depth of the pond, checking the
shape and I do this repeatedly through the digging process just to check that I'm making progress in
the right direction. Now this is something that's a bit more difficult when you're using a pre-formed
pond because you obviously need to dig the hole to match the shape and size of the pond
almost perfectly whereas if you're using a pond liner that will just mold into the shape
of any hole that you've dug. Now for this pond project we hit a depth where we started to find
buried builder's rubble like bricks and concrete so we decided we're going to stop here and then
we can just raise the level of the pond up using the gravel in this bed and that's fine I think I
can make it look really really natural. So I'm just sinking the pond in again and that was to check
the fit and some areas did need a little bit more earth taken off on the sides just to make sure
that it wasn't being bent or contorted into the hole that I've dug and when the hole's the right
size I needed to line the bottom of the hole that I've dug with fine sand and this is going to act
as a bit of a barrier for any hard objects to stop them breaking the plastic of the pre-formed pond
but it's also going to act as a bit of a bed for the pond to sit into so that it's got a bit of
cushioning when it fills with water because 120 litres of water is surprisingly heavy.
Now if breaking ground to start digging the pond was exciting then adding water has to be the next
most exciting stage of building your own DIY garden pond water feature. Now I added water
gradually to the pond little by little and pausing frequently just to check the level of the pond.
This is a stage when building your own garden pond water feature using a pre-formed pond that
you cannot rush because if your pond isn't level you're going to end up with a lot of plastic on
show way above the waterline because water will naturally find a level surface so you want to
get the top edge of your pond as level as possible so that when you fill it all the way up
that water sits nice and level on all sides and I'm so glad I took my time because look how well
this water is sitting along the edges of the pond it's almost perfect and I'm very very happy with
this. And even at this early stage in the construction of this garden pond it's adding
subtle movement with the ripples of the water and reflections and it's adding to the atmosphere of
garden. So now around the edge of the pond I added topsoil and that's creating planting pockets
and using plants is a great way to soften the edges of the pond and to hide those unsightly
plastic edges. Day two in the construction of our tropical jungle inspired pond and I was just so
excited I just sat plants around the edges just to see how it might look but first I needed to add
the pond pump and this is going to power our water feature sterilize the water using an underwater
UV light and a filter and this should keep the water crystal clear. Now I will add a link to the
pump that we've used it's been running for months at this point and it has been fantastic the water
has stayed crystal clear all of the fish and wildlife that have used the pond are extremely
healthy so I can strongly recommend this pump. Now for this initial setup just to get the pump
running and clearing up some of the debris in the water I added the fountain attachment that comes
with the pump and it also has this valve so you can vary how much water is being channeled through
the water feature just to make sure the water is not going up so high it's landing outside of the
water's edge. Now on this day I also took delivery of pebbles. Adding pebble to the bottom of your
garden pond is fantastic because it adds a natural looking backdrop to the pond when you're looking
down and enjoying any fish and wildlife but it also adds a surface area where bacteria and wildlife
can colonize the stones and that's going to really help create a natural balance in your pond.
I loved raising tadpoles when I was a young lad so to be able to get some tadpoles from a friend's
pond and add them into ours so that we can start this cycle in our garden was really exciting and
it's the first life that we got in our pond. There's around 20 tadpoles here and immediately
they went down to the gravel to find shelter but plants is another way of adding shelter and there
are some exciting aquatic plants that you can use. Now I've gone for some that I can bury their roots
down into the gravel and they're going to root into that substrate, use up nutrients and help
keep the water clear. This is also going to act to help create almost an underwater garden for any
fish and wildlife that we're going to add in the coming days and weeks. The more plants you can add
into a pond the more they're going to use up any excess nutrients in the water column which really
really helps keep your water clear. I've also added this amazing floating plant, it's water chestnut
and it has this mosaic leaf arrangement. Day three, it's time to tackle constructing our trickling
water feature which will add movement and reflected light bouncing around the garden pond
as well as the sound of water in a garden which I think adds so much. So the first thing I did was
put a brick down to add a slightly solid base to what I'm going to construct and then infilled around
that using topsoil and that topsoil is going to act as a bit of a planting pocket. Then on top of
this I added sand just like the bottom of the pond to add a soft more moldable base to where I'm
going to construct the water feature. It also means that I can level it off and hide any sharp edges.
Next I created an arrangement like a test using some potted ferns and some dry stones to see how
I might want to stack up this water feature and I think this looks good. There's enough
tiers of stones that we're going to get a slight trickling and drips coming down over these rocks
but if I'm going to achieve this I needed something that had height that I could tie a
pond liner into to help create a waterproof barrier to help water flow back into the pond.
So I stuck to a budget and recycled this old plastic mushroom crate and I thought it was
going to add height really really well but act as a bit of a shape that I can tie in any pond liner.
So with it cut to shape I placed it where I'd like the water feature to be and I think it's
perfect height, perfect shape, and perfect size. So I used cable ties to tie it into the picket
fence that's behind the pond. Now I was thinking this is a great way to add height to a pond that's
in a flat garden but obviously if your garden is on a slope or you've got a slight incline or decline
you can use that natural slope to create a pond water feature. You don't need to stack stones up.
I'm only doing this because our garden's on the level so I need to create height to be able to
achieve a water feature and this is the way I'm doing it on a budget. The pond liner I chose is
really thick because I'm going to stack rocks on top of it so I don't want it to be something
that's going to tear or wear down over the years. So now I just need to lay the pond liner over this
mushroom crate. It's got two sides pond liner. There's a matte side and a shiny side and when
you're laying it make sure that you have the shiny side, that's this side, facing up. Next I cut the
pond liner and always cut pond liner bigger than the size you're going to need because you can trim
it to its final size when it's in situ. You don't want to cut it too small and then have to re-buy
pond liner again. And again before laying the pond liner I've just added a bit more sand to create a
natural slope at the bottom of the mushroom crate as well as hiding any sharp edges. Next I added
the pond liner and again I used cable ties to fix it to the top of the mushroom crate and then I can
drape it as best I can down over the crate and into the pond. I've done two cable ties at the
top here so I just need to make sure that when the water's flowing it's lower than this point
because obviously I've had to put some small holes into the pond liner to fix it using cable ties.
Now it's always a good idea when you're building a water feature or a pond using pond liner
to try and remove as many fold increases as you can because that's going to be a point of strain
on the liner and you just want to reduce any chances of breakages. So that's what I'm doing here
and then I will start to place my rocks on top of this. So I start putting the rocks into my water
feature now. I've started with the biggest rocks at the bottom and that's just going to help create a
strong base and I've pushed it right down hard into the sand that's underneath the pond liner
to get it as stable as possible. And then I added more and more rocks on top until I got to the
desired height. Now this is a bit fiddly. I did have to take a bit of time tweaking the layout,
getting the rocks looking just right and making sure that they're sturdy because I don't want
these slipping off and falling into the pond because again that could break that hard pre-plumbed
pond that I've got. So just take your time if you are building a water feature a bit like this and
get the rocks looking as good as possible because you can always tweak it again once you've got
water added trickling down the rocks because you might want the water to flow in slightly
different ways and you can just add pebbles and stones and tweak with the way that the water's
flowing until you find something that you're happy with. And to make sure that I was happy I added the
pipe so that the water would flow down over the rocks and I could tweak their layout so that the
water would flow exactly how I wanted it to. And then only at this stage did I go in and trim the
pond liner and this is what I mean. If you leave it too big you can trim it right at the end of
the project when you know that you're happy and that goes for all projects using pond liner and
even here I'm leaving it a little bit longer because I want to make sure that that water flows
down these rocks and back into the pond. If I cut it too short there's a chance that that water could
trickle backwards at the bottom of the pond liner and that's going to cause the water level to drop
in my pond because water's going to be escaping the system. I also went in and trimmed the sides
just nice and flush back to where that mushroom crate was but I'm going to soften this with moss
and plants to try and really hide that pond liner as much as possible. Now I added some plants into
the edges and the gaps around the rocks here. This is a Chorus Gramineus, it's an evergreen grass and
it grows really well in really moist soil so I'm going to try growing it aquatically in water and
again its roots are going to take up any excess nutrients to help keep the water clear. At this
point I was so happy with how the pond and DIY garden water feature were looking but I had a
busy couple of weeks ahead so I needed to plant up in a couple of weeks time. Two weeks later and
planting day arrived, now I needed to get my hands dirty and get stuck in so I set up a time lapse
and got planting. I think this is the stage that really brings a pond project to life, it adds
vibrancy and lushness and a habitat for wildlife and I had to be careful because I noticed that
some of our tadpoles had started to grow legs and were hopping around the edges of the pond.
I cannot emphasize enough just how happy I am that we decided to add a pond, a tropical jungle
inspired pond, to our garden. It's looking fantastic and I'd love to talk you through
some of the plant choices that we made. This stunning Schefflera is Schefflera de la Veille
and this is the oak leaf form with those serrated edges. This is an evergreen shrub that is hardy
in my garden, it's taken temperatures down to minus five and it will go slightly lower than
that as well. Look at the size of these leaves with this silvery white underside, it truly is
stunning and being evergreen it's going to add structure and foliage to this display all year
round. Beneath that I added Iris Confusa, this has bamboo-like stems and it will produce purple
flowers in spring. It's going to add a touch of the Himalayas to this display and this unusual
evergreen iris is combined with another unusual evergreen, this is a Farfugium japonicum
oreo maculatum and it has green leaves with these unusual golden yellow speckles but be careful
these are loved by slugs and snails. Now for a seasonal colour contrast I've added the ever
popular Persicaria red dragon with its maroon red leaves adding a bit of contrast to the colours in
this garden and to add an evergreen jungly foliage ground cover to the edges of the pond I've planted
and this will slowly spread via runners and in spring it will produce spires of tiny white
flowers. And what says jungle more than ferns? Now I've added two ferns here this is Dryopteris
seboldii and these leaves will turn to like a glaucus blue colour as it matures and this is a
semi-evergreen Dryopteris atrata. Now as an experiment I've planted a Colocasia into the
water feature so its roots and its corm are directly in the water this is the hardy cultivar
Colocasia pink china and its leaves can grow enormous. Hopefully those big hungry leaves
will produce hungry roots that get down into the water column and suck up any nutrients they need
but it is an experiment because obviously we get cold winters where I am in the UK.
I'm really happy with how the left side of the trickling water feature looks and over the pond
we've placed this old tree branch and it's making it look a lot more aged more like a
jungle pond beneath a fallen tree but on a much smaller scale. I've hidden some of the plastic
around the rocks using old moss and beneath that I've planted a hardy Begonia one of my favourites
this is Begonia pedartifida the red petiole form and I think this is a shade loving hardy
perennial that more of us need to grow because it looks fantastic in a tropical style garden.
And to create the backdrop to this whole water feature I've used a climbing hydrangea but this
species is evergreen this is Hydrangea simanii and I've planted a pair of them either side of
the water feature this evergreen foliage should look good through winter and it should cling on
to that picket fence and its new foliage is this lovely red colour and it could flower
with white flowers which will match some of the other white flowers we've got coming from the
saxifraga in the display. Now to pair with the Schefflera de la Veille on the left of the pond
I've planted a Schefflera taiwaniana that's got the same palmately divided leaves it's evergreen
and it's going to add height and structure and I think the two look really good next to each other
and they are making the pond look really really exotic. Here's a plant that my wife added to our
garden this year that I'm definitely going to grow again it's Nicotiana lime green and these
subtle flowers have a really strong evening scent and just above those flowers wafting in the wind
is this evergreen Podocarpus hencellii and for me it's like a proxy for a weeping willow that
you'd see over ponds and lakes in the UK this is an evergreen form that has that similar structure
arching branches and long graceful leaves that blow in the wind and without a mass of flowers
I think we've already got visual interest from all of the different leaf shapes sizes and forms
this corrugated lance-like leaf doesn't belong to a palm seedling although it looks very similar
this is actually the leaf of a hardy ground orchid this stunning pink-flowered Blatilla striata
is the first orchid I've ever grown in the garden and I'm hoping it continues to colonize this area
and it will create this seasonal display of very tropical looking flowers and this is
underplanted with the ground cover lily pad-like foliage of Assarum. Now to pair with the pink
flowers of Blatilla orchids I've added a pink flowering Ebutalon and this is a cultivar
called Aphrodite. It's a hibiscus relative so although hardy down to minus five degrees
celsius these flowers have a really exotic appearance and joining the display just for the
warmer summer months is this tender Bromeliad, Nea regelia striped fireball which also turns pink
when the sun hits its leaves. I've planted another Saxifraga on the far side of the pond that should
spill over the rocks and just into the water's edge showing how varied the genus Saxifraga is
and to create the appearance of a mossy edge on what is actually a sun-drenched front edge to the
pond I've used Sogina sobulata, a really unusual plant that produces masses of tiny creamy white
flowers. This amazing plant is evergreen and will spread slowly and makes a really good lawn
alternative. It loves good drainage and it loves to be grown in full sun so you can achieve that
mossy appearance in areas that moss wouldn't usually grow and importantly it's not going to
grow more than five centimeters tall so it's never going to obscure our view down over the pond and
by surrounding all of the pond's edges with planting there's perfect shelter for any wildlife
that's coming and going. To create a natural look I planted some Sogina into pots and sunk it into
the gravel to look like it's self-seeded its way around into the garden and make it look really
natural. Another ground cover plant I've used as an edging is Ophiopogon japonicus minor. It's a
grass-like perennial that actually flowers and these flowers are followed by small dark berries.
I think it adds a real nice leaf contrast between that and the Sogina with its mossy looking foliage.
These subdued ground cover plants really help to tie the whole project together and create that
feel of lush jungle planting. If you pause you can really appreciate their details. I've also
added a few more plants to the water itself. This incredible floating plant is commonly called water
lettuce. They are so unusual and water just beads on the surface of their leaves. One plant will send
out offshoots and quickly produce multiple younger plants and with young frogs and newts in the pond
I needed to add somewhere where they could hide from any potential predators and these leaves act
as shelter but the roots that reach down into the water to suck up any nutrients are the perfect
hiding place for those small baby creatures and I've added a pink flowering dwarf lily. I never
thought I'd have the space for a lily. As soon as all of our tadpoles had grown into young frogs that
left the pond we added a shoal of native UK minnows and a pair of rare fancy goldfish. They're Bristol
Shubunkins. I could now sit in my garden for hours on end watching the shoal of minnows swimming
around amongst the plants. The goldfish seem to be getting bigger and happier every day. We've had
wildlife coming to visit with birds and other insects. We've added a pair of trapdoor snails.
They eat old leaves but they'll also filter feed keeping the water clear and surprisingly we've had
a newt in the pond which is something I never thought we'd get in our garden. I am so incredibly
happy with how this project has come together and I hope seeing how we built it has inspired you to
have a go at creating something similar in your garden. I would love it if you could leave a
And I just want to say a massive thank you to Chris, Philip and Gareth that all made a donation
to support this channel since our last video and don't forget you can now support this channel
with either a one-off donation or monthly donations using our buy me a coffee link which
is in the video description and at the end of this video or if you'd like and you haven't already
hit subscribe it's the easiest way to support the channel. Don't forget to go and check out our blog
we've got loads of plant profiles and helpful articles over there.
Thank you so much for watching and I will see you in the next one.
