Pottery at Home: Easy Rustic Clay Basket Tutorial (No Wheel Needed!)

Ceramic Art Studio
35 followers
1 Video ViewยทDec 18, 2025
AI GeneratedยทMay contain errors
So for today's project, we are using some fun little tools that were sent over very
kindly by Diane from Wave Ships 3D.
I will be linking their website below.
Thank you Diane for sending them all the way to Singapore.
These tools are new to me and they make life so much easier especially if you like to make
baskets or things with a lot of strips.
So these are actually cutters for making those strips that you make for baskets.
This one is quarter of an inch and it does have it mentioned right here, quarter of an
inch.
Two of these pointy blades here and it comes with a cover which is fantastic.
Then there's this one which is about three quarters.
This is half an inch and then this one is one inch.
They are dangerous.
So yeah, they are best kept in their covers.
I'm going to be using this one which is a quarter of an inch and this is good thickness
for the size of basket that I'm making.
I'm making a small basket.
All right, so here's a slab of clay.
This is already rolled to about a quarter of an inch in thickness and I'm going to start
with first compressing the clay with my Keryl Mud Tool Yellow Rib.
This is my regular stoneware clay that I like to use and this fires to about 0.5% and it
turns out off-white after the final firing.
Let me just flip this around and do the same thing on this side as well.
All right, so our clay is already compressed.
The next question is, do you want to add texture?
I'm thinking I'll add some texture.
Again, these are rollers that dine very kindly to me.
These are again 3D rollers and these are both patterns that I really like because they're
nature-based and I generally like these kind of patterns.
I think I'm going to use this one.
Now, one tip is whenever you're using something which is non-absorbent like plastic or silicone
thing for the first time, it's better to dust it with a little bit of cornstarch on the
roller as well as the clay so that it doesn't stick and I'm going to do that.
I'm going to take a little bit of cornstarch and dust it all over the roller.
Yeah, I think I just need to do it the first time.
After that, there's a little bit of clay dust as it is on the surface which dries up and
that kind of works.
Okay, I'm going to take this and start pressing it.
This is the first time I'm going to test this out, so let's see.
Ooh, I like it.
Yeah, my clay is really wet.
As you can see, it is sticking to the roller and it's kind of come up but that's okay.
I'm going to just press it down.
Let it settle.
And I like to add texture when the clay is still soft because that's when you get the
best impression.
I'm just adding a little bit more because I could see that, you know, the texture is
kind of deep which is nice.
It takes less effort to get your desired, you know, texture but it does stick to the
clay.
And I like to work with really soft plastic.
That's the other reason that you'll see clay sticking.
See, the second time around, it's not sticking as bad.
So, there you go.
So, that's our texture.
Ooh, I love it.
This is quite nice.
Okay, I'm going to quickly just release this from the base.
Place it here.
Now, it's time to use the tool.
And like I said, I'm going to be using this quarter inch, 0.25 inches.
And so, for today's project, because I'm making a small basket, I'm going to be using these
bowls that I got from IKEA.
They do have a little bit of a cushion here but it should not matter too much because
I'm going to be placing a piece of cloth, maybe fold it twice over and that will kind
of cushion the base.
And this won't really hurt my form, my basket.
So, I'm going to be using this.
I usually use something which doesn't have a foot ring but I like the shape of this one,
the size of this one, so I'm going to try with this one.
Now, it's time to cut out the slabs.
I'm thinking, so the kind of basket that I'm making is slightly different and for this,
I think I'll need longer strips.
So, I'm going to cut it out like this.
And I'm not using any kind of straight edge or scale or ruler to cut this out.
Maybe I should go with slightly bigger, maybe half an inch.
I think this is the better size.
I'm going to go with half an inch because I think this is too small.
This looks good but I have another project, another idea for thinner strips.
I think I'm going to go with half an inch.
Yeah, you can change your plan, that's alright.
Alright, so with the two really sharp edges facing down, I'm going to start cutting out
these strips and yeah, we know how easy or difficult this process is.
Alright, I love it.
This is fantastic.
Should I add texture here?
That will save me a little bit more of...
I think I'm going to add a little bit of texture here as well before I cut this so that...
Alright, it's okay, it won't show, hopefully.
Alright, coming back, I'm going to just take my...
Wow, these are sharp but this is liberating, to be honest.
Now, one option is to obviously pull this out, place it on the side.
Alright, I'm going to leave a little bit of a margin here and then continue cutting my
strips with this.
Also, I see that in this design, because there's a little bit of this slant here, when I'm
running this on the textured surface, it doesn't damage the texture because of the slant.
Otherwise, if it was like a sharp edge here, that would have messed up the texture but
because of this, the texture is saved which is, I think, a thoughtful design there.
Alright, now I have all my strips done.
I'm going to just remove this.
This will all be recycled and used again for other projects.
I'm going to put this aside.
Now, before we proceed, what I'm going to do is, with each of these strips, I'm going
to quickly just, you know, using a dampener, let me just put this aside.
So now, what I'm going to do is, for each of these strips that I've just cut, I'm going
to just take my damp fingers, this point right here, just dampen my fingers and smooth
out the edges.
You can use a plastic sheet to do that.
It's up to you how you want to do it.
I'll just do this and place all of these.
Go through each of these damp fingers and smooth out the edges.
Because my clay is really soft, it's easier to do this step right here.
This is all the prep that we do before we actually start building our basket and I'm
going to do it on both sides because I like it to be smooth on both the sides.
When I'm compressing the edges, there are two things I'm doing.
One is taking care of the sharpness, you know, the edge.
I like it to be nice and smooth.
The other thing is, what happens is when there is deeper texture, sometimes there will be
cracks which develop closer to this texture.
If it is right on the edge, there will be cracks that will start developing.
So when, once you smooth out that texture, you compress the edge, particular issue is
taken care of.
So, that's why I like to just compress my edges before I begin.
I'm not entirely sure if I'll need all these strips but I like to prepare more than what's
required rather than, you know, having fewer.
Because, yeah, once I'm in my making mood, I don't want to go back and, you know, roll
out the slab and, you know, cut out the strips and add the texture and all of that.
So, yeah, this is something I like to do.
If there are extra strips that are left, I'll be, I'll use them to make another project,
another basket.
I'll just dress it again and recycle it.
So, let it be.
Alright, I think we're good now.
Now I'm going to start with the mold.
So, what I'll do is, let me bring out a banding wheel.
Alright, I've changed the angle a little bit so you can see what I'm doing here, how I'm
weaving the basket together.
So, now I'm going to bring in my banding wheel here, okay, and I'm using a bottle here to
lift up my mold which is going to be this IKEA bowl.
Like I said, it does have a little bit of footprint but I have some glass bowls which
don't have this so you can use those as well.
I think they'd work even better but since I have this currently on me, I'm going to
use this.
And to cover this, I'm using old handkerchiefs just to use as a resist.
I'm going to put this on top of it.
If you want, you can just kind of drape it underneath so that, you know, it doesn't bother
with the weaving part of the process.
Alright, now it's time to actually make the basket.
We already have our cut out strips.
I'm going to start with placing one here.
Now, what I'm trying to do here is basically, I'm first laying down the base layer of my
strips, okay, and I'm keeping it with the texture side out.
You can have the texture on the inside.
It's up to you.
It doesn't matter.
I'm placing it like this but the texture is facing out.
Now, just remember the strips that you're placing, the base strips, they are longer
than the height that you want for your basket.
See, these have to hang a little bit low.
They have to have a little bit of an overhang.
Let me just get a slightly longer one.
For example, this one here.
So, make sure that they are longer than the actual height that you want because it's the
way we're going to do the rim.
So, I'll show you what I do there but for now, I'm going to just place this here.
Now, this does have a little bit of the footring like I mentioned but so just be careful.
If you're using something with a little bit of footring, just be careful not to press
on these corners because that will go through the clay and then, you know, you'll have
a separate base which just comes out.
So, just be aware of that.
Now, I'm placing my first strip here, bringing in the second one and placing it across.
Again, making sure it's longer than the height that you need, alright?
Just pressing it in a little bit here at the center.
Here's the next one.
Again, I'm placing it across like this.
Okay, this is the third strip that I've placed here.
This is my fourth strip.
Now, if you just go with this, I have how many?
Four strips here crisscrossing.
One, two, three, four.
You'll get a basket which is very, you'll get a basket which is not very dense.
Like, you know, there will be a lot of space in between.
So, what I'm going to do is before I add more strips to it, I'm just going to press this
in a little bit here, making sure that they kind of stick together.
I'm not doing the, I'm not doing the slipping and scoring here because, because my clay
is really soft.
So, I don't really need to do that.
Now, the next thing I'm going to do is add four more strips here.
But these strips will go in between these two.
So, what this will do is, it will give it a nice, dense look.
So, when I'm weaving through this, there's very little space left.
So, it will give a nice, dense look, like a proper basket look.
So, this is one, this is two.
Okay.
Like I said, four more.
That's why I'm saying one, two, three.
Okay, there you go.
And one more just before.
I know, the top looks like, you know, it has a lot of volume here.
I am going to press this, just this bit, very carefully.
Okay.
Just press it in.
It's all right.
It's not going to hurt your basket.
Just make sure that you press it down all the way so it's a nice, flat base.
If you want, you can add your signature right here.
Okay.
But this is my base strip.
So, I've used eight of these strips for a really small, round basket.
But, I'm hoping the result will be, you know, worth it.
Now, if you see, the base is almost covered.
If you see, this is the base.
This is almost covered with the strips.
So, it's nice and, you know, dense.
I'm just pressing this in, not at the edge, not at the foot ring, just in the center
because it has a little bit of that dip so that, you know, it sits nice and flat.
Okay.
So, that is done.
Now, we start the weaving process.
That's why we needed these extra strips.
Now, for the weaving process, ideally, you should have longer strips.
But, I clearly don't have enough of the long one.
So, we're going to have to do a little bit of flipping and scoring.
So, let me just bring in my tools.
All right.
So, we're going to start at the top.
Now, the weaving is really simple.
These additional strips, they'll go on top of this one, under this one, top of this,
under this, top, under.
That's how you kind of keep going with the base strips with the weaving.
Okay.
Now, let's start here.
Okay.
I'm just placing it here, giving a little bit of a press so that it stays, it sticks
there.
This is coming on top.
I'm going to pull this and place it on top like this.
Okay.
And then, I am pushing it in a little bit.
I'm, again, not doing any of the scoring and flipping business.
But I'm just pushing them here at the joints, at the point where the two strips are joining,
the base strip and the horizontal strips.
I'm just pushing it here as well.
I hope you can see what I'm doing.
Okay.
Good.
Okay.
And again, this will go on top.
Just push it in a little bit so that a little bit of that, you know, sticks to it.
You can continue doing this over the strip and then under the strip like this.
And every time I do that, I'm going to press it in a little bit just to give it a place
to sit there nicely.
I'm going to give it different scores.
I'm going to here.
Step inside.
I'm going to go into it.
There we go.
Okay.
Now, before I go on to the next.
Uh-oh.
Did I miss something?
Yes, I did.
This is supposed to go under.
That's the only thing you have to be careful about.
Oh, this has to go under.
Yeah.
This has to go under this.
Oh, God.
Yeah.
I'm making that cut again.
It's okay.
It happens.
We learn.
It's a good thing that I made this mistake right here at the beginning.
Again, because my clay is really soft, I'm going to just mush it here and attach it.
Okay.
Now, I'm going to just press all of this together a little bit.
Okay.
This will lighten your texture a little slightly.
But again, I'm not too bothered about that.
I'm okay with that.
All right.
So, there you see.
That's one gown done.
And that's the reason you want slightly longer ones because as these strips kind of go up
and down, you need a little bit of a margin here.
So, they come.
They have to fall all the way down.
That's the reason you want it longer than the actual height that you have of the mold
that you're using as a mold.
All right.
On to the next one.
Same thing again.
Now, the only thing you have to remember is if this one is on top, this one will go under.
So, we're starting here, for example.
I'm going to start with underneath this.
Now, it's up to you.
How much of a margin you want to leave here.
You want it to be really close.
You can push it closer.
You want to give a little bit of a room there.
You can do that as well.
Leaving a little bit of a room here.
And then, again, doing the same thing.
Just pushing this in.
Tiny bit.
Okay.
See, this is what I was talking about.
If your texture is too deep, it can start to crack.
So, you have to be careful when you're using this.
That's why really soft slabs work well.
If your clay is drier, it's going to crack a lot more.
So, I just push this in.
Making sure they're almost the same width apart.
There you go.
Okay.
Just push this in a little bit.
And keep going.
I don't have to repeat the whole process over and over, but you'll keep doing this.
Basically, repeatedly.
While I'm doing this, I'm just making sure that the texture doesn't touch the strips.
It keeps smoothing back as well.
This is the first time I'm making this kind of a basket.
That's why it's taking a little bit longer.
But once I do this a couple of times, it'll become a lot easier to weave this sort of a basket.
I've done baskets, but the weave is slightly different.
I mean, it's still going up and down.
So, it's similar in that sense, but it's still different.
There's no base layer.
Usually, you have two layers crisscrossing.
Here, I have put the base layer first, and then I'm doing this weaving bit around it.
Same thing here.
I'm going to just let it fall.
And the other thing is, even if you lose a little bit of texture, what you can do is
with the roller, because these are smaller rollers, you can just push it right there and you'll get that texture.
Alright.
Not bothering with that.
Right now, I'm going to just press this in a little bit so that it's not standing out.
And, you know, the strips kind of stick together.
So, I'm just going to go around pressing these in.
Alright.
That's my second round of strips done.
Let's move on to the next one.
Again, the whole thing you have to remember is that if this is on top, this one has to come like this.
Okay.
So, you're going to place it like this on here.
And then, just checking how far away or close I want it to this strip.
Okay.
This is on top.
That's why you need to press it a little bit.
Okay.
So, just take this and press it on so it stays there and doesn't just fall off like it just did.
So that there's some starting points.
This part, if you want to do strip and score, you can.
I'm not going to bother.
I did that earlier.
Okay.
Alright.
Now, you get to this point where I can see that this is not enough.
I'm going to add a little bit of this extra strip here and try and attach it.
Okay.
Softly, you can do a lot of things.
Just push it around a little bit.
Make sure they're all joined together.
And I will fix this.
Once I turn it over, I will fix this a little bit better.
But for now, I'm just placing it like this.
Okay.
And again, the same thing.
I'm going to press it so they kind of attach to each other.
Okay.
There we go.
That's the second third ring done.
I think I'll do one more and then we'll get on to the top.
On to the...
Hopefully, the last strip.
We'll see.
See, it becomes...
It gets easier the more you make these.
Now, I'm not finding the weaving as difficult as I did when I just started it.
Yes, this is small, clearly.
Let me just go around and press these in first,
making sure they're all nicely attached
and there's no breaking and cracking that's going to happen here for now.
Okay.
Just pressing this in.
Now, we need a little bit of a strip here.
I'm going to use one of my smaller strips and cut out more than you need.
Okay.
And then you figure out how to attach these.
So, for this one, it's going to be on top.
I'm going to make this cut here.
Control.
Control and attach quickly.
Okay.
We will clean it up, so don't worry about that.
I know I'm not cleaning up right away.
Soft clasps, you don't need too much of that, but anyways.
All right.
This is here.
Now, for this one, it has to go underneath.
I'm going to bring this underneath here.
Press it all together and then just make this cut in it here
and attach the two.
Yeah.
So, it's best that you use longer strips,
so you don't have to do this kind of, you know,
sitting and scoring in the middle of weaving ideally,
but if you need to, it's not a worry.
You can always do that.
Just bringing these together and attach.
I'll have to do a little bit of cleanup.
I'll do that in a second.
For now, I'm just making sure everything is stuck.
There are no obvious cracks that you can see here.
Just make sure your strips are all nice and smooth on the side.
They don't seem to be coming apart.
All right.
So, this is my basket more or less done.
Not really.
Okay.
So, we have our basket already woven.
Now, what I'm going to do is for these longer strips,
I'm not going to cut them all the way here because I need to fold them.
I'm going to cut, you know, take any of these
and just leave a little bit of overhang.
Not too much.
Just enough to kind of, you know, fold them over.
I'll show you because I'm not making another separate border.
You can if you want to,
but I want to make it a little bit more rustic like it's an actual basket
that's been woven and then, you know, the edges turned around.
I'll show you what I mean in just a second.
For now, I'm just chopping the excess off.
I'm leaving maybe an inch and a half, leave two if you're unsure.
You know, depending on how thick your clay is and all of that.
So, as you can see, I'm not being very precise.
It doesn't matter.
We are done here, I think.
All right.
Now, I'm going to let this set up
and while it is setting up, we'll do a little bit of the cleanup work,
but I'm using this silicone tip tool.
I have another one which I like to use.
Yeah, here it is.
So, I'm going to use this guy.
Okay.
And then with this, I am just going to go around all of these joints
and just wipe them clean a little bit.
Actually, this was better because it's a bit stiffer.
This one is a bit stiffer, so I'm going to use this one.
It doesn't matter.
You can use any of these.
I'm just closing up these
and if there are any cracks that I can see on my strips,
I'm going to clean those up as well while I go along here.
Okay.
That is done similarly underneath
and I can see a few of these.
Just keep cleaning them.
This is happening only because of the texture.
The texture wasn't there.
Probably, I wouldn't face this issue,
but since we like texture, we deal with it.
Okay.
That's the top one done.
I'm going to go around with this also.
It just cleans up the edges a little bit
and it also seals them and it joins them together.
You don't really need to do this, if I'm being honest,
because your basket is joined.
It's not going to go anywhere.
It can break and crack and all of that,
but it's not going to separate.
It's not going to fall apart,
so you don't have to worry about that aspect,
if I'm being honest,
but I just like that clean look here.
It's kind of sealed
and also I get a chance to look at all the strips
and make sure nothing is cracking, breaking,
looking too dangerous at the risk of cracking.
I think we're done, right?
Another thing I'm going to do
is take a synthetic flat brush
and just clean up again if I see any of the edges.
I'm going to dip it in water,
clean the excess off
and just go over these edges
wherever I see some clay crumbs.
Because I still have it on a mold,
I can kind of push it around a little bit
and see.
If you need to add more texture,
you can do this as well.
I'm not too fussy about that
because once it lays,
you know, you're not really that obsessed with the texture,
so just clean this off.
With a damp sponge,
we go over each of the nook and crannies,
just smoothing everything out a little bit.
Again, I'm just doing this very lightly
and then after this,
we just wait for this to set up.
So I'm just going to let it dry on the mold
for a couple of hours
so that the clay is stiff enough for me
to be able to flip and,
you know, remove the mold
because it can't dry all the way on this mold.
It's another ceramic piece underneath.
As the clay will dry,
it will shrink and everything will crack.
So we will not be waiting
for it to dry completely
before we remove it from the mold.
Just remember that.
So for now, I'm going to just let this sit.
Also, we need to work on the rim, right?
This is also pending.
So honestly, right,
if you're here,
let me just work on these a little bit
because if they get drier,
then I won't be able to do what I'm trying to do.
So basically what I'm trying to do
is just take this,
I'm adding a little bit of water here, okay,
and it's turning this over like this
to create this rounded edge.
Okay, and then you can just
Actually, let's just do this while we are here
with the ones that have to come this way.
Okay, and I'm just making sure
that my clay doesn't crack from the top.
You just have to keep adding a little water
and pushing it in.
Like I said, you don't need to do this.
I'm going with this particular,
you know, thing.
You don't have to.
I'm keeping a damp sponge right here
and then adding a little bit of moisture on the inside
and then just turning this over like this.
You will see a little bit of cracks that come up
as soon as you turn,
but add a little bit of water,
you know,
press in
most of the clay
I'm doing this for the alternate ones
because these will come like this
and these will go on the inside
and for that you will have to get the bowl.
So right now, because the bowl is already at this angle,
I'm just doing the ones that I can easily turn over
on the outside, right?
So just do this and
another thing you can do is
press it a little bit so that it's not as thick,
right?
Add water, add a little bit of moisture,
make it thinner
and then turn.
Now this is longer than the other,
so I'm just going to cut it off
so that it's just enough to fold over
and not more than that.
Alright, so we have all of these
folded over.
Now, I know my basket is still soft.
My clay is really soft,
but I'm going to attempt to pull this off
from the mold and see how that works
and then we'll do the others,
the rest of them.
Alright, so we have the basket flipped over.
I couldn't wait for too long.
Again, impatient as usual.
I'm going to pull out my
mold.
I'm just going to gather my cloth first
and making sure all the corners
are in my hand before I attempt to
remove this.
It stands. It doesn't fall.
Okay, great. So we are good
if it's not just, you know,
falling apart and it's just not flopping.
That means it is good enough
and honestly because there is
enough of a weave, there are enough strips,
it's highly unlikely that
it will fall apart and it's a small size.
Now we have a few things to do.
One is obviously fixing these.
I'm going to turn these inside.
These are already turned on the outside.
These will come on the inside like this.
Before I get there, I'm going to fix
a few things.
A few cracks and joins that we had initially
that I could see. Now, as I folded
this, you can see there are a few of these
superficial cracks here. I'm going to fix them
right now because
before I strain the basket anymore,
let's fix these.
You can see it's quite soft
as I'm cleaning this up.
You can see that
it is moving.
It's soft but it doesn't matter.
Okay, that is one aspect.
The other thing I have to do is all these
joins, I'm going to just work on them so that
they are nicely attached. We did attach them from the outside
but from the inside I can see
places where there are joints.
I'm going to just fix
these before I move on.
Okay, I can see this one
and then I can see this one right here.
This one I think I can add a little bit more
clay and
just cover it up.
I'm using a little bit of clay,
storing it here and then adding a little bit
over here because my objective
is to just mush it all together.
I'm just adding a little
moisture and a really thin layer of clay
and then
mixing it all up.
I'm supporting from the outside
so it doesn't go out of shape completely
and then pressing it
to get a nice seam.
Okay.
The rest of it will be taken care of
with the clay side.
Mixing it all up.
Alright.
That's sorted. Can I see any other joints
here on the inside?
I think I'm good. No other joints that I can see.
Now we'll work on the top
rim here.
Again, I'm going to add water to these.
Okay.
Just soaking it.
This is not a dripping sponge. It has
water. It's not completely
ringed out but it's not dripping.
Just adding a little bit of moisture there
and then slowly
let me show you this way
adding water and then slowly turning
this over.
I didn't have that option
when I was doing these ones but
now that I have the option I'm going to be a little bit more careful
and turn these over
like this. Now you see there aren't any
cracks happening here because
we added the moisture and we turned it over
molded it really slowly.
I think with clay it's just about knowing your
clay more than anything else. That's what
kind of defines how
good or bad it turns out.
Once I do that I'm just going to press it back
a little bit. I'm going to do the
same thing all over.
Slightly damp sponge. First dampen
these a little bit. Press these
a tiny bit.
Make them smooth.
Also
pressing it. While I'm doing this I'm also
pressing these.
I'm adding my moisture and pressing these.
I can see this one is too long so let me just
cut this off.
Let's go around.
Okay.
I think I'm happy with the way
this looks. Now I'm going to just shape
this because while I was doing this it's gone a little bit
out of shape. So I'm going to press around
my rim
and
shape it a little bit.
I think we are good here.
Now I'm going to let this set up a little
bit. Ideally covered with
plastic. Drying slowly
so that nothing
cracks and breaks.
Once that's done I'll add
the final pictures and images
at the end. That's all I have
for today. I hope you enjoyed the tutorial.
I'll see you soon
in another video. Bye!
