The South Korean Daewoo K2 Rifle with Firearms Expert Jonathan Ferguson

Military Rifle History
1 follower
Dec 18, 2025
As seen in Squid Game, this week Jonathan delves into the South Korean service rifle - the Daewoo K2.
0:00 Intro
0:15 Daewoo K2
2:10 Firearm Features
7:20 Adjustable Gas Regulator
8:15 Firing Mode: Cow
9:20 Magazine Release
10:54 Features Continued
11:30 Disassembly
17:50 Conclusions
20:47 Outro
We are the Royal Armouries, the United Kingdom's national collection of arms and armour. Discover what goes on behind the scenes and watch our collection come to life. See combat demonstrations, experience jousting and meet our experts.
Hi everyone, welcome back to What is This Weapon? I'm Jonathan and this is not a legally different
video game M16. This is the Daewoo K2, a South Korean service rifle. What sparked this one
is I was watching, catching up on Squid Game Season 2 and perhaps unsurprisingly, since it's
made and set in South Korea, one of these showed up. I was kind of hoping it was going to be in
a bit more. Spoiler alert, it's not. It is quite a brief couple of appearances of this thing among
a load of sort of generic AR-15 rifles but I thought it was cool. Went straight to IMFDB to
see what else it had appeared in and unsurprisingly, a fair few other South Korean productions,
Train to Busan, the movie, and Zombie Series and a couple of other things. It's logical, it's a
standard service weapon, you know, you expect the SA-80 to show up in something set in Britain,
depicting the military in some way. But not just South Korea, this thing also, and I don't remember
this but I'm sure the internet doesn't lie, this also shows up in at least one episode of
the original A-Team TV series as well, so that's interesting. I'm guessing that's the first batch
of imported semi-automatic variants. That's what made me remember that this existed and you will
also find videos from Forgotten Weapons, unsurprisingly, but also Nine Hole Reviews
really putting the thing through its paces on the shooting range outdoors as well. So those are
worth a look. What we can offer you on top of that is, well, this is an actual, not I guess a South
Korean military service weapon, but it's exactly the same. It's from the same production run as
those, which means it has the full house, the four position selector switch, but we'll come back
to that in a moment. So briefly, because this has been covered elsewhere, let's just run through
the main features. So right at the end here we have an original muzzle protector. I always think
it's nice when they come with those. This is basically a brand new rifle, so we'll put that
out of the way, and that lets you see the flash presser there. It is similar to the M16A2 style.
It is closed on the bottom, as you can see. It's slotted and it is set up for launching rifle
grenades as well, but it is longer. This portion here is longer than the standard A2 birdcage,
so it isn't a standard component. In fact, there are very few interchangeable components on this,
between this and the M16. It is, in a way, more AR-18 for reasons that will become apparent.
Not least, if we jump straight to the back, we have here push down and fold to fold the buttstock.
This was an AR-15 gas tube based system, stoner system, direct impingement, whatever you want to
call it. We wouldn't be able to do that. We'd have a buffer tube of a certain length sticking out the
back, so that's why it's veering more toward AR-18. Actually, the disassembly system is a
little bit AR-18-y as well, but other than that, it's quite different to both. Then to deploy it,
you actually have to push down and flip. If you try and rip it open, well, you'll be there for a
while. You might even damage the weapon, but nice and solid when it's deployed. This and the AK-74M
or even the old skeletal version, very solid folding stock designs, I think. I guess the
Galil one's pretty good as well, but then this one, I find, is easy to operate in both directions.
Some of them are easy to open, harder to close. Training solves all of these issues. Anyway,
back up to the front, we do actually have, and this normally wears a hazard tag for this reason,
we have a tritium insert on the front sight protector, which is very robust, very solid
casting, and then we have a fixed blade front sight within that. While I'm talking about sights,
let's talk about the other sights. This went in a bit of a different direction than the
Colt M16A2 family. It has the same type of lateral adjustment as the original M16, M16A1,
AR-15, going right back, which is adjustable by putting the nose of a bullet into this detent and
rotating it, but they went in a different direction for the elevation adjustment, and it is actually
user adjustable. Like the M16A2, unlike the A1 and the earlier variants, that's a, you turn a wheel
sideways, this one you turn a smaller wheel vertically, and that gives you your elevation
change. You can see it goes up incrementally, and this is marked on the side, so 2.5 with a handy
arrow, this is quite a user-friendly design I think, there are arrows, well two different arrows
showing you what the correct default setting is, so in this case 2.5, so 250 meters, arrow points at
that number, that's what your elevation is at, you know, raising or lowering the muzzle accordingly,
or you do that to compensate for the sight adjustment, standard sight stuff, and then we
rotate that, so that's 2.5, we rotate it to the 4 setting, to the 5 setting, and then finally
maximum range is 6, so 600 meters up the top, and then we rotate it back around, and it drops back
down. And there's even a notch on the 2.5, so you've got a very visual, in fact even a tactile,
like if you're in low light you could you could feel the notch, why you'd be adjusting your sights
in the dark, I mean in theory you would be, because the front sight semi-illuminates, because
the sight protector does, you can see where your front sight is at any rate, I'm not sure how
effective these are as night sights, but nonetheless. So that gives you that, that's what gives you that
very long rear sight protector setup there, there's always a reason for a design, a visual change in
design, from design that something is based on. Obviously no carry handle, as on the the Armalite,
sorry British use of the word Armalite there, the AR15, M16, M4 family. While we're at it,
while we're on sight, this is drilled and tapped for an optic rail. I haven't seen the original
1980s vintage optic rail for this, but I imagine it was some sort of proprietary system, see if we
can dig that out, show it to you in post. Later we get some Picatinny rail on top, but this is
classic 1980s Cold War look. So an interesting feature I think is the adjustable gas regulator,
not unique by any means, but this has quite a lot of settings. So we are on our default position,
very soldier friendly, big yellow arrows pointing at each other, means you're on normal, so you'll
be able to crack on and use this as normal in a normal environment, under normal use. But it's not
N for normal, it is essentially equivalent to M for medium. And then I think the easiest way to
explain the rest of these is going to be to pop out the regulator. So we have the usual spring
plunger and detent in the front there to get your settings right, and the settings as normal
correspond to, let me show you, so with zero uppermost, that's just a zero, the hole is
blocked so the system can't work, so there's no hole. And then the other options we have are small,
medium and large. Now the large is for adverse conditions to allow more gas to flow through and
overcome any dirt, sand, anything like that that gets in the action and slows it down through friction.
But what's unusual about this I suppose is the small gas aperture, which is intended according
to the manual for cold climate operation, which is interesting. So you have two unusual condition
settings, and then you have the off setting for launching rifle grenades, because as well as an
M203 copy you can fit to this, this was designed to be able to launch rifle grenades off the muzzle
device, and you need to turn off, you have to remember to turn off the gas before you do that.
Clearly we have our gas tube here above the barrel, old school heat shielded handguards there,
I don't think we need to take those off, you can check out Ian's video if you want to see that,
but we will have a look inside. Before we do we have a sort of semi-protected
magazine release here, so little bit of AR-15 history, started out slick-sided,
lots of complaints, including from the British by the way, of the magazine button
getting bumped and the magazine falling out. Now the partial fence on the AR-15 M16
isn't actually, as far as I can tell from any literature, it was never intended to shroud the
magazine catch, it just extended back here to provide a plunger for this pin, to stop it coming
out and soldiers therefore losing it. So that partial fence on the AR-15 is literally just a
detent housing, then they finally, well not finally, quite quickly actually, on the M16,
or into the XM16E1, switching to the M16A1, and the M16 for the US Air Force was updated as well,
they put a proper shroud around the catch. South Korea's gone in the middle, so they've got this
acting as the detent for the front pivot pin, but then they've extended it, and I don't know why
Colt didn't do this in 1964-ish, because the Americans and the Brits, and probably others,
were complaining quite a bit about the ease of bumping the magazine. In fact Colt offered the
British a stronger magazine catch spring as an interim solution, because they were looking at
something that hadn't yet become the shroud. So sorry, bit of a tangent there, but I think it's
an interesting design decision to extend it back here, because that can only really be
as a way to help prevent bumping the catch and dropping out the magazine. We've got a reciprocating
cocking handle here, nothing you can do about that, but it's just, you know, you're firing
from the right shoulder, so no worries really about operation. We have a slightly weird
disassembly catch system here, where that's the sort of use position, that's the disassembly
position, and it would be very easy to leave it in that position. Admittedly you're probably not
going to bump this so hard that it pops open, but something that struck me when I was handling it
as maybe not ideal. Now we can then take out our recoil spring, and then we need to pop the
cocking handle out. Now according to a comment on Ian's video from an armourer, that is very
deliberately designed as a screwdriver blade. There are a few screws, probably the main one
would be the handguard I guess, and very gingerly, that's a pretty good fit for a screwdriver blade,
so I'm inclined to say that chap was indeed a South Korean armourer. And then we can take out
the bulk carrier and the piston in one, so this is the big departure. We've got a very AR-15 M16
lower setup here, albeit without, it has a buffer but it doesn't have a buffer tube, but then we
have this, I mean arguably quite Kalashnikov looking, long stroke gas piston. Unlike the
Kalashnikov series, it is not fixed to the carrier, so that piston comes off and you've got
that to clean, and then you've got your bolt carrier to clean. I don't know why I'm fixating
on cleaning, but that's the main reason you'd be taking the thing apart as a soldier. And we do have
a pretty typical AR-15 bolt except that, so it has the extractor similarly set up, but the ejector
is not a plunger built into the bolt face. I don't know why they changed the view on that,
whether they thought it was superior or, I can't imagine it was cost saving, this is not necessarily
a cheap rifle to make, but it does have a blade ejector, like a Sten gun really, running in a
channel and therefore it has to run in the bolt itself. Where is that? Well you can quite plainly
see it, in fact let's pop off the lower because I want to show you the the bits that you won't
see elsewhere unless you're in South Korea. There's that blade ejector and it is spring-loaded
so it gets out the way when it needs to get out the way, and it pops up when it needs to
ride in that channel. Now the two together, the extractor hooking out and the blade pushing on
the other side of the case head, sends that case spinning out in that characteristic fashion
that video games often get wrong, but increasingly they get it right.
So a much shorter bolt carrier than on the AR-15 family, same kind of cotter pin, firing pin,
retaining pin, but it has the trapezoidal notch there for the cocking handle. Right, so really
I think the main event as far as stuff you won't have seen before, hopefully, on the lower receiver
we have our four positions. So we start off logically enough there, obviously again this
is all going to be in Korean characters so not an export variant per se, that just blocks
the trigger mechanism from firing of course, and then the first firing position, so this is so
fast, so AR as it were, that then takes you to semi which will release the hammer when you pull
the trigger as per normal, and then automatic which of course functions as automatic always
does, we've got a safety or auto sear here so that the hammer doesn't follow the bolt forward,
and then where it gets, well sort of interesting but sort of not at the same time, is the bottom
setting which is burst, so with the selector knob uppermost and the arrow pointing at the setting,
i.e. burst, at that point it functions, well three round bursts, so pull the trigger, the hammer goes
forward, bolt comes back under recoil, under the gas system recoil, operation of the gas system,
comes back, is then held by the auto sear, comes forward for another shot, back again, forward for
another shot, back again, at which point it doesn't come forward again, so even though the auto sear
is activated, the hammer can't fall even though I'm pulling the trigger because it's counted off
three rounds. Now this is not some amazing breakthrough, this works essentially
almost exactly the same as the M16A2 or the M4 burst mechanism, in other words if I,
I don't need to simulate it, but if I let off the trigger after one or two shots, I then get one or
two shots on my next burst, so my next burst won't be three rounds necessarily, so really that's a
training issue of if you're going to fire a burst, you're probably going to want to hold the trigger
until all three shots have fired. It has a counter wheel in there, we'll get in there and show you,
it's on the opposite side of the hammer to an AR, but it really does work the same way other than
the auto sear being up here and not at the back. I guess the gold standard of three round burst
systems or burst systems generally, unless we count the AN-94, is the H&K system. Very complex,
but it allows you to at any point release the trigger and it will reset the clockwork
back to three rounds, and you'll always get three rounds every time you pull the trigger.
And finally I guess we have a rubber butt pad there, might be overkill for 5.56, but
we have in the pistol grip there quite a neat, well secure, a bit too secure actually,
so quite a strong spring there, and then we pop out a little cleaning kit,
so there are two little bottles in there, the smaller of which has a brush. So cleaning kit
in the pistol grip rather than in the butt trap, as would be typical of an M16 of this era.
That's the K2. It's the only variant, we do have a couple of these, but it's the only variant that
we have. The other major variant being the K1. Now in a way that I think is a little bit backwards
compared to how things are normally designated, the K2 is the full-length infantry rifle,
and the K1 is the short-barreled carbine version. Now that did away with the folding solid stock
and went for a telescoping twin strut buttstock, and then into I think the early 2000s the K2C
carbine came out, which was the carbine version of the K2 rifle. So they kind of set aside the
architecture of the K1 with the sliding stock, and they just shortened the service rifle
into a carbine version, and they went with an M4 style sliding stock, which I'm never a fan of,
I always like original designs on rifles, and then that got lengthened back out into the K2C1,
which is back to being a full-length rifle. All quite confusing, but we only have the one
to worry about. So I believe manufacture and initial sales of these would have started in 1983,
and that's when the Nigerian government bought their first batch, and another batch in 2006,
and they purchased a total of 33,000 of these. So not just South Korea,
we know of at least one other country that purchased. That's a significant purchase.
Now part of the reason I mention the Nigerian purchase, apart from the fact that Armament
Research Services, who I've worked with, picked up that and published that online a while back,
so I know about it. Also, in fact the reason it came up is that some of those ended up in the
hands of the Avengers. Not those Avengers, needless to say. So this is a Niger Delta
militia group called the Avengers. So as with all weapons, they can end up in the right hands,
or the wrong hands. Discuss! But it's never going to be a world beater. It's coming too late in the
day. The AR-15, M16 has already predominated. AR-18, for people to potentially look at, but
that wasn't hugely successful as a military rifle either. In fact, really not at all successful.
So a bit too late for the export market. But for a state design and manufactured thing for your own
armed forces, yep, works well as far as I can tell. Been in service since 1984 to the present
with a few of these variants. So the K2C1 is modernised, and the K2C as well, with a railed
handguard, Picatinny rail on the upper receiver. So they're keeping the thing relevant in a way
that basically all armed forces around the world are trying to do. But quite an interesting hybrid
of approaches, a little bit of East and West mashed together there, and I think quite a cool,
distinctive weapon. Thanks for watching guys. Don't forget to do the usual YouTube stuff. I
don't always remember to say it, but liking, sharing and subscribing as well. With YouTube
being a little bit perplexing sometimes as to what it does with videos with guns in,
you will probably want to subscribe to make sure that you get all of these.
Check out our website, our social media accounts as well, and I'd just like to give a shout out to
the LIFCO, Small Arms Museum, over in Australia. They are going through some very tough times at
the moment. They are closed. There were some thefts, and they need money to bring their
security up to standard. So head over to their website, link in the description to that, or you
can Google LIFCO, Small Arms Museum, and please do what you can to help them out. They are our
counterpart collection down there in Australia, and we really want to see them come back.
But whatever you do, join us again here next week.
