HOW to BONSAI a CHRISTMAS TREE 🎄

Fix & Flourish
8 followers
4 Video Views·Dec 18, 2025
Welcome to Rosary and Bonsai Studio. Today we're going to be working on some Christmas trees,
a lovely Picea spruce that you can pick up for around £15 from Lidl's here in the UK,
and also a little catch up on the Christmas tree we did last year in Nordmund Fir. Let's get to it.
Now it's a fairly large tree, we are going to have to take some of the top off and reduce
some of the bottom growth. And inside the tree it's actually got a lovely thick trunk.
Get in there and cut all this top growth off, so it doesn't have to be a perfect cut at the moment.
Getting in there, gently removing all the soil at the top, and it's simply just
moving needles as you wire. I'm going to coil this top end of the branch, wrap it around,
get behind the tree, just bring them down a little bit more,
bring you down a bit further, up and up again, you down, then up. So I'm going to get rid of that one.
So this tree has definitely recovered since last year, it's pushed a fair bit of growth.
I feel like within the next growing season it's going to go a bit crazy. But we have loads of
lovely new little buds, back budding all over the place, and also on where we left next to no growth,
and on these stumps that we cut back hard. We've got back budding all the way down here,
all the way going up, it's looking absolutely beautiful. There's not much we can do to it.
I feel this time next year will be our next move on this tree, especially when these new buds start
extending in the next growing season, where we can start reducing this growth and start building
final ramification with the new growth. And even though it's near almost exactly a year,
there's no sign of wire bite on these branches yet, as they have not begun to swell, as the
growth has not pushed far enough. So we're not going to be removing the wires today and maybe
left on for another growing season, as we don't want to take them off and then for the branches
to spring back in place prematurely.
One thing for sure, we're not going to be needing that little pot are we? So we've got a few things
on the table here, got a lovely little training pot, copious amounts of water, got all our tools,
let's crack on. So we've got it out of this pot, we'll be gently brushing away the top layer of
soil. The soil is very wet, we've been having lots of rain. You can see not a lot of roots have
really taken, even though it's more reduced to soil mess more than it should. That's what we're
left with, a nice little square to work with. Now we need to reduce a lot of on top, no more than
50%. Now we are going to want to get it into this pot. Before we do that, we're going to do some
branch selection, while it's not in the pot. So all these ones lower down, we don't want.
I'm going to get a thick wire on it, run all the way around, get some shape on this tree.
So that's our first branch here, there, now you find this a lot on young spruces,
it goes all lovely paper and then it'll thicken where all these branches are sprouting out.
I could remove the top here, or I can remove some of these. Today I'm going to remove some
of these ones, they're not needed. So we've got you, we've got you, you coming back down that way.
This is where we're going to start building our apex. Do you like to smell a spruce when
you're cutting them back? Something about it. That doesn't look too spectacular at the moment,
I'm going to start getting some wire on. So we've got some lovely 3mm thick wire,
we're going to double up on this and get a nice shape on this tree. We've got our two wires,
and we're just going to get this attached to the root ball as much as we can. Squeeze,
start it right at the base, twist it round, remove any branches that gets in the way,
not remove, just move them out the way should I say. So where these branches, we want that little
curve there, and then back up and see how it's now getting this lovely curve. Bring this one down,
this one down, and this one. I've got this lovely curve now. Now we need to shorten this one.
Now, as you can see, I'm bringing these down. Okay, probably going to be the perfect tree for
the end of this video. That would be lovely, wouldn't it? But no, this is starting a Christmas
Bondi tree. A tree in one could probably make it look like a tree in one. Chances of it surviving
that process could be next to none. You may get to enjoy it, and there's always a chance it may
survive when you go to absolute brutality, even though what I've done right now is probably more
than most people's quiet tastes. Everyone thinks slow and steady, but there's a big difference
between slow and steady, and not getting anywhere with your trees. I'm going to wire these ones,
and then we'll start building our apex. So the thing is, because we created this subtle movement,
that allows us to have the option to create the subtle movement in the branches.
So it's all blowing. If you've got a straight trunk, you're going to need straight branches.
If you've got a nice curly trunk, you can have curly branches. You can see what I've done here.
I fold it right in on itself. You have to do these crazy bends to achieve what you want to see in
a bonsai. Then we've got this one here wired. Just fold it in and out. I am going to put some more
wire on this one eventually. Are we getting there? Still got lots of positioning to do.
I think I'll get this one wired and more wire on this one, and have this one coming out this way.
I'm feeling this one's probably going to annoy a lot of people. You get all the so-called
professionals thinking they know what to do. Let's be real, half the time they're all winging
it anyway. They learnt the basics for the last 10 years. That's definitely getting there.
You saw out this piece now, and I feel like I need to accentuate more of these bends that we put in.
So we've got our apex here. I do feel like the top is a wee bit too strong.
I'm just going to move that. I feel like this bend needs to be lower down.
So we've got a tree curving slightly, and it needs to go that way, but this needs to come down
lower. Maybe it needs to come round a bit. That's better. Now before we start building this apex,
I thought we'd better get it in a little training pot. You can see it's already starting to come
together beautifully with all these wild bends, but we do need to start building this apex.
We're doing a very similar job to what we did in this midsection here, and that helped build the
crown. Yeah, I think a nice slanted position with some regular potting soil. That's what you want.
Now if you're wondering, the soil mix I used was, I believe it's lava rock, pumice, pine bark,
regular soil, and that's perfect for it. It really is. This tree loves that type of soil. But now it's
time to start building the apex. You saw earlier how I bent over the top, and this is what a lot
of people do that no one seems to share when it comes to building the apex, and what it will do
is going to help us build this all into a nice one big section. And now all these ones should
fall into place a lot more nicer. Now I do have some moss to decorate it, and this tree will need
a good watering. People often ask me how do I grow moss. It just grows. Water loads. I just felt like
I needed to build something behind it, and I forgot to bring this branch down.
Just gives it a little bit more depth and less 2D looking.
Now I removed some of these on the side here, but this tree can only improve in time.
Now this is not a bad tree for 15 pounds from the liddles. It's absolutely looking beautiful
for a beginner tree, and I've just shown how easy it is to get started. Now one thing I do find what
people say about spruce trees is that when you take the wire off the branches just bounce back
anyway. But this is why I gave him the extreme manipulation to create tiny tears within the
cambium which a tree will then heal up over time, causing the branches to stay in place.
Will some still spring up? More than likely, but more likely most won't. And obviously the wire
stays on for a lot longer. Now this tree is going to need a lot of looking after during the winter
because we have had a bit of a heavy cut back and a heavy cut back on the root. But we didn't remove
more than 50% on either of them, so it definitely stands a fighting chance. So I really enjoy making
these videos for you all. It's been a good year so far and we've still got our winter video on
the way, probably after Christmas. But I wish you all the best and a happy new year.
