1,000 Baby Pigs Arrive to the Farm

Pig raising and pork processing
23 followers
You're oppressing the elderly and violating child labor laws all in the same day.
I got chewed on. Got chewed on by a pig just like Torque is right now.
Sharp as a meatball can be. What do you think Jordan? You think it's gonna light? I don't think
it's gonna light. Good morning everybody. We're up here at site three and we're gonna be getting
some baby wiener pigs in this morning. We dumped this barn kind of during harvest. We weren't
really able to get a bunch of footage because we were busy with harvest. Fall has been a busy busy
time and it's good to have all the crops out of the ground. Manure is drag line and spread and
now it's back to doing a lot of pig work. So getting everything ready to go for the pigs
because they're going to show up in about two hours. So we're just making sure we get all the
mats where they need to be. Feeders where they need to be. Nipple bars on. Dad's dragging mats
to that side and then we'll fill up the feeders with the nursery ration that they need right when
they walk in the door. So it's going to be a quick fill. We are going to probably get full this week.
So they're weaning four days this week and every single day that they're weaning they're going to
be weaning over a thousand pigs. So this barn will fill up quick which is awesome. Running the heaters
because it's it's November now so gonna have to burn a little bit of LP but I probably won't have
to burn a ton because we're going to fill this thing up quick they're going to get bigger and
bigger and we'll have to probably use less heat as time goes on so that's nice. If I was starting
in the middle of December when it's really really cold or middle of January then I would have to
probably supplement heat a lot longer. So we're going to get after it and get everything ready
to go so these pigs have a perfect environment when they walk through the door. How we doing
you know only you could find a way to take advantage of two groups so you're oppressing
the elderly and violating child labor laws all in the same day. Takes a special kind of person to
we're double dipping. How are you doing? I'm good. Feeling good about everything? Yep weather's been
great we got pretty much everything done we got a little bit of maintenance we got to do to finish
up a little bit of stock dropping but other than that we pretty much got everything done outside
always nice to get a new group of pigs we shipped all the problem all the problem pigs out that we
couldn't fix so we're getting a fresh bunch of impressionable young pigs that we can train right
so hopefully these guys don't finish don't finish out like the convicts we just got rid of so happy
to be starting over. Yeah so basically what we're trying to do is we're going to open all the backs
of these gates all these rear swing gates we're going to open them like this because we'll end
up running the pigs down this fast alley is what we like to call it versus the center alley in the
middle of the barn because they just move down there a lot better there's more room to count
them and it just works good that way so we swing the gates this way we put the mats in front of
the feeder because we'll mat feed when they're initially here for about two to three weeks
filling the feeders turning on the waters to the feeder making sure our feeders are adjusted to
the level that we want like this and then we'll turn around the nickel bar and making sure it's
in the right position and that's about it that's all we got to really do and then if we have time
before they show up we'll throw feed from the feeders onto the mats so that they can have feed
right in front of their face when they get here and the goal is to just get them to go to the
feeder that's what you want you want pigs to get used to going to the feeder and knowing that that's
available for them so whenever they're hungry or whenever they're thirsty they know where to go
all right there was one last thing that we got to fix before the pigs show up
one of our temperature sensors up here is not in good shape it got chewed on got chewed on by a
pig just like torque is right now and when that happens i was up here when i think it initially
happened and when i was up here the heaters started to kick on in the middle of the summer
and they would kick on and kick on and kick on and turn on and off on and off on and on on and off
and that's no bueno especially in the summer so we just went ahead and went to our controller and
just shut this temperature sensor off completely and shut all the heaters off because we didn't
need them but now it's winter we're starting a new batch of pigs we got to make sure we fix this so
when we light the heaters we're going to be in good shape and they don't you know turn on and
off on and off so this is fix it here is gonna work his magic and what do you diagnose doctor
well so this how old is this barn now five five years old yeah so if you're building a hog barn
the devil is in the details tell your electrician you want stainless steel screws for everything
because these are five years in now in a perfect world you never have to get into this box because
nothing would ever break but it's a hog building so you're gonna have to in another five years
or even three years what'll happen is you'll come to do this and these heads will be completely
rusted off to where you can't get the screwdriver to take them out and then you'll have to throw
yourself a whole bunch of expletives because you're so mad and then you'll end up breaking
the cover and have to buy a new cover and then the cover you buy won't have stainless steel screws in
it either so you'll put it back in and then if you live long enough you'll get a complaint about it
again so just put stainless everything in it to start with and it'll be one less thing for you to
get mad about but pretty easy fix actually so there you go they just wire nutted these
so we'll loosen this up pull the old one out boom gotta loosen that a little more shove the new one
in and then i gotta strip it back a little bit get the shielding off i don't know i don't use
wire nuts because that box will get moisture in it and then you get corrosion in them and then
they don't work so i use telephone connectors eventually they won't have these because
everything's wireless so maybe you don't use telephone connectors for anything but you shove
your wires in and when you smash it down the inside of this is full of a like a clear jelly
so it seals it so you can't get any corrosion in it so that's why i like using those so you just
snap it like that and then it makes a good connection we hope it makes a good connection
sometimes with my fat fingers and my poor eyesight it makes these jobs a lot more
difficult than they used to be keeps you sharp yeah supposedly sharp as a meatball can be
and then this other wire the red wire we don't use because they fold
it's a three wire cord and my new where is that there it is and then this is just like a ground
i'm just going to spin that together cut off a little extra and then i'm going to put one of
these on there just to keep it tight i definitely wouldn't need to do that but i brought one so
i get paid by the connector so i might as well use them okay so before i seal that up i'm going
to go to the control and make sure that it reads this probe okay so if we go to our south room
there's a little bit of bug crap on here so go to our set point okay there's our probes so before
this was just reading a line so it's reading so that's good and i don't have any alarm so
now did we shut off everything that ran on probe one that's what we need to remember i think we did
okay so all our hard work wasn't in vain probe works so now we'll button this back up jordan
even managed to keep track of the cover and the screws and he didn't drop them that's pretty
impressive what are you smiling about popeye sawyer doesn't have much faith i have had
i have had a few energy drinks this morning hey brah let me ask you can we put some red bull for
these things sometimes the guy's got to ride the bull am i right later skater nice and easy nice
and easy okay the last item on the agenda is this heater because it's not lit now that could
just be because it's been six or seven months since we used it maybe the pilot just went out
or we shut the gas off temporarily or who knows what the rest of the heaters around yeah the other
two are running so i don't know we'll see gas is on we're gonna see if we can light it
what do you think jordan you think it's gonna light i don't think it's gonna light
he's not optimistic he's already he's already fired so if it doesn't light what do we gotta do
well if it doesn't light then chances are that the either the thermal coupler is bad because i
got a pilot there's there's a pilot there he keeps going out so if it does that either the
thermal coupler is bad or the gas valve is bad so these were all made all in 2000 and i probably
have replaced every gas valve in them this was a horrible batch of heaters lb white got bought by
modine hopefully modine has come up with a better cheaper chinese gas valve than what these are
because i'm way too good at changing gas valves and before all you come after me with your hot
ignition you just give those a few years till all those connectors start going bad i'll stick with
my gas valves because i don't want any hot surface ignition anything because it's just another layer
of crap that's going to go bad so i guess you pick your poison and i've picked mine but it still is
annoying when they're this new and you have trouble with them so i don't know we probably don't have
time to dig into this now but either this will get replaced or this will get replaced and if
you replace this this is going to get replaced anyway so maybe you just do the whole thing and
be done well we're making really good time right now so we still got an hour before the truck's
going to get here but we got this this entire room ready to go for pigs so and we fixed everything
we're going to fix today in the south room so we're just going to head into the north room
and we're going to put together this room now might as well work ahead that way we don't have
to deal with it the rest of the week and all we got to focus on is just getting pigs in so
gonna do the exact same thing that we did in the south room in this room to get it all ready to go
you know the saying many hands make light work this is an example of that we got this all done
already this north room it's all ready to go took us like 15 20 minutes for three of us if i was
doing that all by myself it'd probably take me close to an hour uh 45 minutes to do all that so
man we knocked that out pretty good so really all we got left to do is sit on our butt drink some
coffee and wait for the pigs to get here you want to it'll start you just wait around the corner
and then when you bring a bunch just get them down kind of towards me and i'll count them
carburetors ready
so
one two three one two three four five six seven eight nine ten
nineteen twenty to one two two three two four two five six six seven eight nine thirty one
three two three three four three five six six seven thirty eight seven three nine fifty two
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,70.
There we go. 68. That's all we got.
Go on.
Hey, hey, hey, hey, hey.
Woo!
I'd say that was a successful morning, boys.
Got her done.
You got school today, Jordan, or are you off today?
No school today.
Nice.
I like it.
Yes.
Alright, well, thanks for your help.
We appreciate it.
Yep.
We'll do it again tomorrow.
Yep.
We won't have Jordan, but.
I got school tomorrow, sadly.
School is so overrated.
It is.
Sorry, I shouldn't say that.
I got a lot out of my educational career.
Okay, we got them all in.
Got them all counted out.
68 to append.
And we got a total of 1334 today.
It'll be more of the same the rest of the week.
The only day we're not getting pigs in is Thursday.
So, like I said, we should probably have this barn full within this week.
If not, we'll have one more day the following week where we'll get a split load to finish us out.
Good-looking group of pigs so far.
There's not a bunch of smalls.
They look pretty healthy.
They look big.
They look full.
So, hoping for good results.
Hoping these pigs are a great group.
And hoping that we don't get a bunch of health issues.
So, that would be amazing.
Hoping for more of the same as we continue to fill this week.
That's going to wrap it up for now, guys.
I'm going to go home, do some office work, go to the warehouse, do some farmer-grade work, and just keep chipping away.
We appreciate all of you.
We love you guys.
Thanks for watching, and we'll see you in the next one.
