How I Make Vodka with Bakers Yeast Pt.1 The Wash

Brandy Channel
12 followers
Dec 13, 2025 #wine #winetasting
#wine #winetasting
This is part one of the series in making Vodka using Bakers Yeast.
The aim is to present a better process to making a Sugar Wash.
This is what I have found as the best solution for my needs.... If you have found other, please comment.
RECIPE
25 ltrs warm water 30 - 34 Degrees C
4kg Sugar
1/2 cup Bakers Yeast
1 tsp Citric Acid
1tsp DAP
Small pinch of Epsom Salts
Hi there, welcome to part one of a two-part series of making vodka with baker's yeast.
And part one is going to be dealing with putting together the wash.
Part two will be the distillation of the wash.
So let's get into this.
These are the basic ingredients that you're going to need to make yourself a reasonably
good sugar wash, a simple wash that you use for distillation of ethyl alcohol.
You've got your sugar.
In this case here, I've got 5 kilos of sugar.
I happen to know that 4 kilos of sugar will give me an 8% alcohol by volume end product.
But I want to try and bump that up to 10%, so I'm going to put 5 kilos of sugar in.
Now when you add more sugar, yes you can get it up to 10% alcohol by volume, but it starts
to slow down its distillation process.
It'll start off fast and it'll get slower and slower and slower.
So that means to get that extra little bit of alcohol, it's the expectant of another
day or two in the distillation process.
But keep in mind too also, you don't want to go over 10% alcohol by volume, because
when, let's say for example we put twice as much sugar in as I have here, no you don't
actually double the amount of alcohol by volume, because we're using baker's yeast.
You're going to reach around about 10% max and then the alcohol will actually kill or
stop the baker's yeast from working.
So it's important to keep it at a maximum of around about 10% alcohol by volume.
Other ingredients.
We have sanitiser.
We have this particular sanitiser, it's phosphoric sanitiser.
You use this in here, in your distillation bin.
A little drop and some water and it bubbles up, that sanitises it.
Then you can either just pour it out, I give it a little bit of a rinse as well.
But I also use it in this spray bottle, in a diluted form, so I can spray the equipment
that I use to actually make the wash.
It's important to have that.
You want to keep the whole thing reasonably sanitised because it's just like a big petri
dish, you don't want any bacteria getting in there because it's going to grow in the
yeast environment.
This is an airlock.
This is very handy.
It keeps out foreign bodies because you put this in the top of the distillation container
and it keeps, as I said, the foreign bodies out.
Very important.
Diammonium phosphate, DAP.
This is quite interesting.
When I first got into making my own alcohol, I was using turbo yeast.
Yes, that serves a purpose, you need to do a fair bit of carbon cleaning and carbon filtering
to get the turbo yeast to a palatable condition.
But I used to then start experimenting with baker's yeast and I thought, well, I do need
to have a yeast nutrient.
So you don't just put yeast, sugar and water together, that's going to flatten its face
very quickly.
So I went to the internet and I found baker's yeast, or I found a yeast nutrient.
This cost me $3.50, a tiny little thing, it's about 50 grams, it's tiny, $3.50.
And that's what I was using to actually give my yeast that little bit of nutrient.
I did some research and found out that a lot of the wine makers and the beer makers, on
a professional level, they use a thing called DAP, Diammonium Phosphate, which is this stuff
here.
So I did some further research and I found out that I can actually buy this for $7 a
kilo.
This is a yeast nutrient.
So I'll put the link in the description below, but very, very good.
We only need a teaspoonful of this per 25 litres, so very good.
It's going to give you quite a vigorous start to your baker's yeast.
Other things we have here, citric acid.
This is very useful.
We use it in the distillation or in the wash here to lower the pH level.
Now I happen to know my pH level here in this house is actually around about 6 or 7.
Ideally you want about 4 or 5 and you assess that by using either a simple pH litmus paper
or you can get a special pH filter kit and test that yourself.
It's cheaper on the internet, around about $0.50 for that.
But make it around about 4 or 5 pH level and you use basically a teaspoonful of citric
acid to do that.
Another actual great use for this is using it to clean out your column and I've got a
separate video which shows you how to do that.
So feel free to have a look at that.
Another thing here, magnesium sulphate or Epsom salts.
Very, very interesting product.
We use that to soften the water and to soften the water basically, if it's hard water you
need to have an awful lot, an old estate for example again, you need to put in some magnesium
sulphate to soften the water to make it easier for the whole thing to work.
Put a pinch of that in only, a tiny little pinch, you'll see me do that later on, that's
all you need of that.
Yeast, baker's yeast, this is a simple baker's yeast from the local food store and it's very
affordable, about $4.50 for that.
So it's very affordable and I'll be using a half cup in this wash and this is actually
just a container to actually activate the yeast so later on I'll put some warm water,
I'll put some sugar and yeast in there and wait for it to start growing before I add
it to the distillation chamber.
Thermometer, very important because what you want to do is you want to regulate the temperature
of the water going into the barrel here because when you have the finished product up here
with your water, you want it to be no hotter than 30, 32 degrees.
Any hotter it's going to destroy or kill the yeast or any colder and the yeast will remain
dormant.
So you want it about 32 degrees, 32 degrees.
We have an incredible, interesting tool here.
This is going to allow you to monitor the strength of what you're doing, measures a
specific gravity, it's a hydrometer and you can actually measure the density of this when
you are growing.
Remember how before I said I want to have 10% alcohol by volume?
Well I worked it out, if I knew 4 kilos of sugar gives me 1060 specific gravity and that's
8% alcohol by volume, I want to get 10% alcohol by volume, that's 1075 specific gravity and
that relates to about 5 kilos so you can do the math.
It's important to use that so you don't want to, if you're doing a baker's yeast brew,
you don't want to have it any stronger than 1075, that's 10% alcohol by volume and it
shows you on here what that is.
So very interesting tool and hydrometer, most necessary for that to happen.
Let's start putting this all together now.
Alright, I've already got some water inside the barrel here, it should be around about
30, 32 degrees and I'll double check that to make sure, actually it might be a bit warmer
than that but we've got that up to 32.5, about 33 degrees, that's good.
That's a good temperature to have it at.
So we can start putting the sugar in and that's going to get the whole ball game going.
So you start the whole thing going, pour all your sugar in, we're only putting 5 kilos
in remember.
I'll give reference to where we actually got this recipe from, there's a fella by the name
of Wino, it's an appropriate name for a guy but he actually is a contributor to a forum
called the Home Distillers Forum and he put a recipe together and it's called Wino's Plain
Old Sugar Wash and the recipe for his version is, I'll actually put the link in the description
below, but the interesting point about it is that I'm doing exactly the same as his
recipe.
Now his recipe calls for only 4 kilos of sugar, I'm using 5, that's the only thing different
but apart from all that I'll give you reference so you can have a look at that and it's very
worthwhile actually having a look at that forum, very interesting for finding out some
of the little secrets about doing stuff and I found a lot, I could learn a lot from that.
So anyway the sugar's in, now time to put the other ingredients in, I've got the epsom
salts, I only want a small pinch of that remember, so it's just a pinch, that's it,
that softens the water a bit, we've got the citric acid for lowering the pH, so one teaspoon
of that, that's fine, then we've got DAP, diammonium phosphate, I don't know how useful
this is actually, it activates the yeast and actually helps it to go quite vigorously from
a very early stage, so you've got one teaspoon of diammonium phosphate in that as well.
Now all we do is simply stir the whole thing up and we keep on stirring until it's pretty
well mixed, so I'll cut back to this when I've actually had it all dissolved and I've
actually filled it up with all the water necessary and I've got the yeast ready.
While we're back, I've got the container filled with sufficient water for the distillation
to take place, I've got the next stage ready here, this is basically where we're going
to put together the yeast and some sugar to activate the yeast and then put it into this
container, I've also got my pH litmus paper to test the pH level prior to it, just to
verify that it is in the range that I want, which is going to be 4 to 5.
So first thing we do, while this yeast is activating, I'll finish stirring the bucket
to make sure all the sugar's dissolved, I'll put a bit more sugar into this bowl here,
this jug, this is just to activate the yeast for no other purpose, it's just to give the
yeast some food so it can start bubbling and start going and when it's activated then we
put it in here.
So I've got a half cup measure, I'm just pouring in my baker's yeast, it doesn't need
to be exact but close enough is good enough, there's a half a cup of baker's yeast there
and now I'm going to actually just start mixing it in the jug I have here, I'm going to mix
it slowly, make sure the yeast is actually at room temperature too, I store it in the
fridge normally, so if you're going to use it, make sure it's at room temperature before
you start mixing it and it's going to help it to activate a lot faster.
I think we'll cut back to this when I'm getting closer towards having all the yeast in.
The last bit of yeast is going in now and it's pretty well mixed, if you don't mix this
as you pour the yeast in, since you've got half a cup, it's going to completely clog
up everything and you won't be able to get a good mixture in there.
So I've got half a cup of yeast in there and it's a happy little Vegemite and it's a nice
even consistency there which is good.
So now that's perfect, that's evenly made and I'm going to use this again to actually
help disperse it in the top of the barrel.
Now while this is actually activating, it'll start increasing in size, you'll see this
as time goes by and when we come back, I'll have another camera and I'll take a shot from
the side on this so you can see how active this yeast is.
So right now, while I'm waiting for this to actually activate, I'm going to finish stirring
my sugar wash to make sure all the sugar and the other ingredients are dissolved.
Getting close to the top of the container there, see.
So what I'll do now is I'll finish off my preparations to make sure everything else
is ready.
Final step, I'll check the pH level and give it a second or two, that's good.
It's got a pH level roughly around about 5 which realistically is where I want it.
Okay, so that's fine, that's ready, we've now got a very active yeast container here
and it's going to be time to actually start adding the yeast to the sugar wash, the final
stages of the preparation.
Alright so that's very good, it's happy, it's activated and it's going to do a wonderful
job.
So now all we do is we start pouring it in to the sugar wash and you've got a rich foam
which is going to be on the top.
So what we need to do now is to sort of get that foam mixed in with the rest of the wash
inside there.
So just scrape as much out of the container as you possibly can.
So that's good, actually what I'll do while I'm doing this, I'll take a film of this as
well so at least you can see what's happening.
So you can see here there's a rich foam and you can sort of see some of the liquid down
there, see it's mixing with it.
So the idea is step one, mix the foam in with the fluid and step two, after you've done
that use the plastic spoon to mix it from the bottom up.
So that's going to give you your preparation necessary for this to happen.
So that's pretty good, I'm quite happy with that at the moment.
So that's finished, don't need that again.
The stirring spoon, stir that up until you're completely happy that there's an even consistency
all the way through.
I'm happy with that.
So now we have got this baby nearly ready for the final stage.
This is where you put it to bed for a while.
Okay, so we've got the lid, we're going to put that lid on, make sure it's nice and tightly
put on so it's airtight.
And speaking of airtight, we've got an air lock that we're going to use here.
Excuse me while I go out of frame, just to put some water in.
Alright, so we've got the air lock in place, now we're going to put it in place.
Now the waiting game comes upon us, it's about 30, 32 degrees in there.
We want to try and maintain that at 30, 32 degrees.
So when I put it to bed later on in the laundry, I'm going to have a strap around it and that's
going to help keep that heat there.
If you put the strap up higher it maintains a lower heat, put it down lower it maintains
a higher heat.
So you'll learn this as time goes by.
So I'm going to cut for now, I'm going to come back in probably about half an hour's
time when this starts to bubble and I'll see if I can capture that for you.
It's just about 35 minutes past when I actually finished putting this barrel together and
it's just started bubbling.
Now let's just see if I can catch it, hey?
There she blows!
There'll be alcohol in that there barrel there Bea.
You'll notice that I've also got a heater strip down here.
Now this heater strip is going to help to keep it nice and warm on these cold wintry
nights.
I've also just picked up some thermometer strips.
Now these thermometer strips are very handy.
Now you can use your digital thermometer all the time but at a quick glance these thermometer
strips are going to be able to help you to keep it in the right temperature.
Remember we're aiming between 30 and 32 degrees for the overall temperature of this as it
goes along.
So now I'm going to put it to bed in the laundry and in about three, maybe four days
time it's probably going to be stopped bubbling completely.
Now it starts bubbling fast, it'll get faster than this but then it'll get slower and slower
and slower and slower.
So in about three or four days time it'll be time to think about now racking it, basically
siphoning off all of the liquid, leaving the sediment behind and then putting in something
to help separate it even further until we end up with a clear liquid.
Yeah so there we go, part two, the distilling, that's coming up.
