Easy Origami Paper Jumping Frog Tutorial!

DIY Cute Things
114 followers
Comments are disabled for this video.
Hey guys and welcome back. In this tutorial I'm going to show you how to make this really simple
origami jumping frog and it does actually hop a little bit if you just push down on the back.
And as you can probably tell the model is really easy to make
and you're going to need one square sheet of paper to make this. So let's get started and
I'll show you how to make it. Alright so for this model we're going to use a square sheet of paper.
I'm using a six inch by six inch square sheet of origami paper. So we're going to start with
and you want to fold it so that the right edge aligns with the left edge. So you're folding it
in half sideways. Once you have it aligned crease it into place. Now we're going to fold it so that
the top edge comes and aligns with the left edge. So fold it down like this. Once it's aligned crease
it in. Unfold it. Now fold it so that the top edge aligns with the right edge. So fold it down
like that. Once you have it nicely aligned crease it into place. Unfold it. Now what we're going to
do is we're going to grab both these sides here right above the two diagonal creases we made.
We're going to start to push them together and as you do so you'll notice the top part is going to
fold down. Just go ahead and push it from the top so that it folds naturally into a nice little
triangle shape on the top. Go ahead crease everything into place. Now this fold is fairly
arbitrary it's just creating the leg of the frog. You're going to grab this right tip here the right
tip of the triangle and just fold it up so that you get a crease from the center point there.
Pretty much as you fold it it's going to stop at some point and just fold the leg up to some point
like this. That looks fairly good. Crease it in. Again it's fairly arbitrary so you can decide how
much you want to fold this leg up or down and then try to match it with the other side. So grab the
flap on the left side, fold it like this. That looks almost equal. Crease it in.
There we go. Once you have this shape we're going to fold it so that this edge here comes and meets
this point. So fold it down and as you fold it you want to make sure this layer sort of lifts up
allowing this to fold under. And as soon as you have this tip meeting that point right there you
should be good to go. Just like that. Crease it into place. Do the same thing with the side.
Fold it so that this tip comes and meets that center point there. Once it folds to the center
crease it into place until you get this shape here. Once you've got the shape go ahead and
unfold the two flaps that you just folded down. And we're not going to fold it so that the bottom
edge comes and aligns with this edge here. So fold it up just like that. Once you have it aligned
crease it in. And now just go ahead and fold it back down along the creases that you had already
made. So fold it back down like this. Do the same thing with the left side. Just fold it down
along the crease that you had already made. Crease it in. Now we're going to fold it so that the
edge comes and meets that point right there. So you're folding it up just like that. Crease it in.
Once you have this shape we're pretty much going to fold it down so that the right edge
comes and meets the bottom edge. So you're going to fold it down like this.
Crease it in. Do the same thing with the left side. Fold it so that the left edge
comes and meets the bottom. Crease it in. Alright so for this next step what we're going to do is
we're just going to lift this layer out a little bit. Just let it sit loosely. And you want to just
pinch in this side and start pulling on the top layer. So you want to just lightly pinch it and
start pulling it so that the layers sort of fold out on their own. Flatten it out. Do the same thing
on the left side here. Just sort of fold it out just like that. And it should naturally fold into
shape. Now we're going to take this edge here and we're going to fold it down so that it comes in
and aligns with this crease that you just made. So fold it down like this. Crease it in.
Do the same thing here. Fold this edge right up against that crease right there, the diagonal
crease. Crease it in. And that's really all there is to it. You should now have your finished
jumping frog. I hope you guys enjoyed the video. If you liked it,
please don't forget to like, share, and subscribe. And I'll see you guys next time.
