Sketch Brooklyn Bridge New York in Pen & Ink

Architectural Sketch
1 follower
1 Video View·Dec 12, 2025
Welcome to part two in this series of lessons showing you how to draw three different cityscapes
in pen and ink. Now just a heads up these are fairly in-depth ink drawings rather than the
quick sketches that you see in urban sketching and I do like doing those but sometimes you know you
just want to put a little bit more detail into your artwork. For this second project we're going
to be drawing the iconic Brooklyn Bridge in New York, absolutely perfect subject matter I think
for pen and ink. If you missed part one we drew a street scene for London and in part three we're
going to be doing another busy street scene and you'll find the links to all of those parts in the
description. Check that description as well for materials and links to download the reference
photographs to follow along because I do want you to follow along. If you do enjoy this lesson a
quick thumbs up is always much appreciated or drop me a comment in the section below. Other than that
once you've done this second cityscape please do come and find me for cityscape number three.
Okay so you can see that I've already spent quite a bit of time on the initial outline drawing
in fact this took me about 45 minutes maybe even a little bit longer 60 minutes
and I suspect that that's going to be about the same amount of time that the rest of the drawing
in ink takes me and the reason for that is that it is an intricate subject matter
and the perspective is really really important to get nailed on. So even if you're going to end up
with quite a sketchy quite a loose rendition if your perspective is sloppy if you don't take care
over the vanishing points and taking your lines to those vanishing points the image isn't going to
work. So you can see that I've left in these construction lines here so these are going to
my vanishing points and if you think back to the drawn essentials course or any of you that are
already familiar with perspective you'll see that this is two-point perspective. So if I bring my
ruler in you can see that the lines on this side of the image to the left hand side all of the
horizontal lines are going down to a point somewhere right in the middle of the skyline at the back.
So if I take the ruler around you can see that is our vanishing point. The vanishing point on the
right hand side of the image for these lines here and these lines down here is way off the paper
okay so you can't see that on camera I don't actually have a vanishing point for that because
it's so far off the paper I'd have to put two or three pieces of paper down just to fit that on
but by putting them in what it allows me to do is if I've got to gauge some lines in between these
two I'm going to know roughly what angle to put those lines at. Similarly up here I know that
that angle of that line is gradually going to increase. Now the way that I approached this
drawing was to first put in a vertical line that split the left and right hand vanishing points up
so I drew in a line right down the middle and it is right between this section of the bridge.
I then put in this strong diagonal line so I just measured it with a pen or with a pencil
and we've got that strong diagonal line in put that one in and then you can build the image from
there so by looking at the top angle and putting that one in I can then draw down with the ruler
and well you can't find the point with the first line but you can draw that first construction line
in measure the angle at the very bottom so it's this one here put that one in take your line up
with your ruler and then you can plot in your vanishing point. Everything else then becomes
that much easier because you can take a line from your vanishing point to make sure that all of these
little details on the bridge are the correct angle. Your next challenge is to separate these lines
so that they are the correct distance so for example this line here is slightly less than
halfway isn't it so it's a bit closer to the bottom edge than it is to the top edge.
If you're drawing your picture exactly the same size as your reference photograph
that's quite easy there is a little cheat or hack if you like you can place your reference
photograph of as I have right next to your drawing and then just move across and make a
little mark there same for any other reference point that you want to put in. Now other than that
the only other piece of advice that you need for a drawing like this is to take your time the more
time that you spend on this initial drawing stage the better I think your overall ink drawing is
going to be. So for example this area here so the distance between this and this this column here
and this column has actually got if you can count them one two three four lines in and it's quite
easy to get a little bit bogged down with those lines and make one too far apart and then the next
one too close together and then the next one you've not got enough room to put in. So the way
that again I approach this is to look at the total distance and get that in first so you put the total
width in first then break it up with the middle line which would be this one so I just draw this
to the side so you can see what I mean you can erase it later so I'd look at the total width
and then I'd look at the middle line that separates them is that right in the middle
well for this it roughly was so this line here is in the middle of these two and then I'd separate
and put these two in so this one was in the middle here this one however was slightly closer
and that is much easier you're going to get a much better result than if you tried to put one line in
then the next one and then you think well the next one's there and the next one's there what you end
up with is the overall width being too wide or too narrow and things start to get out of proportion
the first thing I'm going to do is just to erase back some of these lines with a kneadable eraser
just so they're a little less imposing I just find them a little bit too imposing when they're that
strong when I'm going over with the ink there we go so you might not be able to see those lines
on camera I can still see them and I've got the confidence of having drawn the lines in initially
that I can replicate those with the pen so I'm going to use a 0.3 mil pen that's middle of the
range 0.1 being our smallest 0.5 being the largest and I'm just going to go over the outline but what
I am going to avoid doing is drawing solid strong black lines I'll talk more about this as I go
through and for large parts of this we're going to speed the process up because it is just the
of going over the lines that you've already made but there are a few points that I do want to pick
out so when I come to those we'll slow things down and you can see them up to you where you start
always a good idea I think to start more in the foreground and with some of the strongest lines
so we've got this strong angle here and put these in so you can see I'm using the pen
slightly on the side I'm not straight down I want to get quite a thin on occasion hit and
miss line I don't want strong black lines not at this stage so again you can see the hit and miss
lines when necessary always err on the side of being more conservative lines that are more hit
and miss at any stage I'll just say this one more time but at any stage that you're not sure at the
angle of your line just take a step back and follow the construction lines that you can see
to your vanishing point it's really really important you don't want to ruin a drawing
that you're going to put a fair amount of time into with a couple of dodgy perspective lines
so for this line I just want the faintest of marks so I'm just touching the paper hardly putting
anything in and the reason is is because this is in the light this is a light side of the building
of the structure and if I was to place a dark line in that it's going to look artificially
outlined which is not the effect that we're looking for and don't worry as well you'll see
that a lot of my lines look quite shaky so yes we want these verticals to be nice and vertical
so parallel to the edge of your drawing plane your paper in this case we want them to be nice
and vertical but we don't want them to be ruler straight we don't need them to be ruler straight
because this is a drawing and we want to show some character within the marks that we make
okay while we're in this area just a quick tip just something that has reminded me when you're
in the drawing stage if you have a construction line in pencil that runs across the top of the
image what it will do is it will make sure that each of these individual pillars are nicely in
line with each other they're the right height comparative to each other if you don't have this
line here and you just try and draw them individually by eye what tends to happen is you
get one that's slightly higher and then one that's a bit lower one that's somewhere in between and it
just spoils the effect that construction line across the top of them works really well okay
now as I get into this more distant area here this part of the bridge the skyline in the back
I'm going to a 0.1 mil pen so this is the smallest pen that that I own the smallest pen that we're
using for this particular study and the reason for that is that you want thinner finer marks
into the distance because we want them to be less imposing less dominant they should be
thinner finer marks okay real hit and miss in the background here so you'll notice that at no point
in any part of the drawing have I used these solid black lines they're all a little bit shaky a
little bit hit and miss but that's certainly the case as you get into the background the nib of
the pen we're using on a flat angle a flat air angle you know go too flat at first all that will
happen is that you won't get any ink out so there's no ink coming out but you can just gradually adjust
that until the ink starts to flow and then the same for the skyline in the back so this now
becomes real hit and miss so touching the pen and then lifting off and by the way when I drew this
the skyline in all I was doing was just drawing basic shapes so basic blocks cubes squares that
kind of thing and what I did do was just measure the angle just with the pen you don't have to get
these exact so you don't have to worry about taking every horizontal through to a vanishing
point but it's very easy to to be confused for your eye to be confused as to whether the top
line of this for example is it sloping up or sloping down and it's not until you place your
pen or an object on there that it becomes obvious so just place your pen as you get to each building
just so that you're putting in lines that are not going to be too far out so there's our line
drawing and at this stage you should be really happy with your construction lines and your
perspective lines now even though we've put this down in ink there is still a bit of an opportunity
with the shading process to make some adjustments if necessary and I think it's well worth going
over with your ruler just to make sure that your your horizontal lines all go to the correct
vanishing point left and right and that your verticals are indeed vertical okay so for the
shading I'm going to start with a 0.3 pen you can start where you like my recommendation is to focus
on something in the foreground and your biggest focal point which is this part so I'm going to
start with these vertical columns and I'm going to keep the mark making fairly vertical I'm not
going to put a lot of cross hatching in I'm just going to keep these nice and vertical and don't
worry if you get what appears to be tide marks this is going to end up being a lot darker than
this so we can go over the places that we need to just to remove those if it's something that
offends your eye so shadow side there this is a shadow side so let's put that in when you've
got all these different lines that are close together it's always a good idea to get the
shadow planes in first because that way it just gives you some extra information it's another
piece of the puzzle that makes everything that much clearer so that you can carry on with a bit
more confidence so on this particular plane here the light is catching this area so that's a nice
little detail to keep in I'll make sure that we reserve that and another point just to note if
you're not too familiar with drawing with ink so the hatching process you'll notice that all of my
marks are in one direction so I'm making a mark down lifting the pen mark down what I'm not doing
is backwards and forwards as you might do with a graphite pencil that's going to look start to
look quite messy and it's not really a style I don't think that is in keeping with pen and ink
okay and then as I come on to these planes here so these pieces here in between the pillars
you'll notice that the the value or the tone of each of these is pretty similar so it's quite
difficult with ink anyway to show that one is forward and one is recessed it is going to help
when we put the darker areas of shadow in between them but what I want to try and do is just
distinguish between two different planes one that's further forward one that's further recessed
so for these planes I'm going to do some cross hatching so vertical marks to begin with and again
notice how these lines are of a hit and miss quality so I'm using light pressure the pen is
on an angle such that I don't get these jet black solid lines I get scratchy marks hit and miss
here and there and that just gives me more opportunity later on to add a greater level of
texture and mark making and subtlety compared to if these were really thick dark jet black lines
something that you would get with a felt tip pen okay and then I'm going to place some cross
hatching marks across these areas just so we can separate the mark making on this plane from this
plane now the important thing is that you don't just go and put horizontal cross hatching marks
in you want to keep these cross hatches relative to the perspective lines that you've put in already
and that's where these construction lines come in so I've got one that I can just about see here
in pencil you might not be able to see this but there's one there one there one here and here
and I cannot have to take every line obviously due to the vanishing point but I'm going to be
able to get a feel for the angle that I need to move the pen on as I make these hatching marks
and how that angle is going to change so we'll start at the bottom again same kind of hit and
miss scratchy line and I'm just adjusting the angle as I move up so from the bottom I know
it's the angle here as I move up that angle is going to change okay same on here so we can start
from the top this is a bit difficult for me to do without being able to turn the paper around
you can certainly and should turn the paper around so you're not forcing yourself to work at funny
angles okay and then at this point I think it's nice to start putting in some of the stronger
shadows some of the strong shadow lines that you get under the lips of the stonework up here at
the top some of the strongest shadows maybe in this side here in here some in and around here
certainly underneath the bridge that's just going to help you to establish that tonal range that
you're going to get throughout your drawing so let's start from the top and work our way down
keeping with the hatching mark so we're not just going in and colouring things in I do want to look
any of these overhanging lips on the stonework that I can put in as a nice strong shadow line
so none on there but we can certainly get a few in here this area needs to be quite dark in here
there's a dark lip under there but this dark piece down the bottom that piece is in the light this is
really dark down here so we can put this in as a nice strong dark okay so this area down here is
really dark isn't it so we can just strengthen the marks that we've already put in the hatching
and the cross hatching and then we've got this side here which is really dark a really dark area
up the top here so there's the lip at the top of the building top of the structure which
is in shadow it's casting a shadow so let's get that one in strengthen this dark plane here
so that's caught in quite a lot of heavy shadow got a really strong dark in here so this is
completely black this shape so just observe what shape it is so in this area here now we've got
some real nice dark shadows but also some weathering within the stonework itself so what
I'm going to do is starting at the top and just distinguishing this pillar from this plane here
I'm going to outline that side edge there and then from the top just dragging down
so lifting off as you get further down you can actually put this edge in here as a nice strong
dark just so we give ourselves somewhere to work from so from the top dragging down
and what hopefully that is going to represent is a sense of weathering you know rust and dirt
and grime that is leaked through from the bridge above onto the stonework below this is a really
dark area under here so we can add quite a bit on there but always starting from the top working
down and that way you'll get the strongest values towards the top and they'll gradually fade off
as you lift the pen off below and then the same from the bottom so you want to work up this time
from the bottom and lift off and a bit of hatching in if you want to just towards the bottom just to
remind the viewer that this is a different plane and then the same again on this side so that we
can then establish this outer edge of this pillar here so rather than just drawing a line down to
outline it that way that's the lazy way we're going to pull down some value from the top
get that line and again just so we know we're working from so from the top and down and again
from the bottom so we can work up now at this stage it's a good opportunity just to step back
and make an assessment of the values that you've added down so are there any areas that you want
to strengthen that are too light in comparison to the rest of the marks that you've put down
already and I would say these areas here are a little bit too light so I'm going to strengthen
these I'm going to go over with the 0.1 pen so 0.1 mil same directional marks just going over
them to strengthen them and then what we can do in the same way that we did round here is even if
it's not in the reference photo just give a sense of a bit of weathering just helps to separate this
plane from the pillar next to it so just on the left hand side there maybe strengthen this line
slightly it's really dark in this corner isn't it so let's just add some extra hatching just to
so everything gets lost in the corners which tends to happen anyway you'll see that a lot
with architecture as you're drawing it just giving a slight indication that there's some
stonework just around these two arches because they're obviously very characteristic of this
bridge so you can afford to add a little bit more detail around them but I'm not trying to draw in
individual bricks I'm literally just putting in a little a few extra marks just around that area
and then for inside the archways we've got a shadow that comes across in that direction same on here
as well so we can put that shadow in just with some diagonal hatching marks it's actually a
lighter value isn't it than the rest of the face of the bridge and shadows are normally a darker
value but this one is a lighter one I'm not going to put anything on there I'm going to leave that
as it is I can get this shadow line in here just carry it on through nice strong mark there just to
show that there's a bit of a ledge there and I want to just break up the purely vertical lines
of these central pillars and it's going to allow me to add a little bit of texture certainly on
these bottom ones as well but rather than using perfectly perpendicular hatches as we have there
we want to keep this as separate textures to this plane so I'm just going to use some diagonal ones
so just on the outer edge not all the way across but just the outer edge don't have to be all the
way through this is the 0.1 pen and they give you the most control allows me to strengthen
any real strong shadow areas which this one is here just around the bottom there so wherever
one structure meets another you can spend a little bit more time around where those two
structures meet because that would be what you would actually see in in real life where
dirt and grime and whatnot is collecting
the next area I'm going to focus on is the underneath of the bridge now this is in the
foreground but it is moving away from our focal point so I want to be less deliberate with the
mark making a little bit more sketchy and that means I can move to a bigger pen so I've got the
0.5 pen and I'm going to go in first of all just to establish this line again and I want to go
quite strong here so again taking these hatching marks in the direction that it would move so
not all parallel lines they're going to gradually diverge until it meets this line here so this
this outer line here of the bridge so again just be careful about that you don't simply run your
lines all at one angle and that needs strengthening I think that would benefit from a nice real strong
dark particularly on this side let's put the darks in that are underneath this structure whatever
this is here so there's a real dark shadow shape that you can see underneath that anytime you see
really dark shadows that's a great opportunity to add some real punch and strength to your drawing
so don't be conservative there are places within any ink drawing where you're going to completely
obliterate the white paper underneath and used conservatively you know not too many places
it really will add that depth and that punch to your drawing so this structure underneath here
is really really strong there is the light is just hitting there's an area of light there
so I'm going to make marks that are along the lines of this looks like a metal plate maybe
some extra support so just building it up it's going to be almost jet black this shape
but avoid the temptation of just filling it in or coloring it in almost and keep your lines moving
in one direction okay and then I want to put some hatching marks just to bring the value of this up
so I can go back to the big pen again 0.5 but again keep those hatching marks going towards
your vanishing point so they're going to be relatively flat here and then as we move out
they're going to move more in line with this construction mark here so again from this left
edge and out and the angle is now slightly changing as I come across not that much so don't
worry if you put a few incorrectly down as long as you catch it early the subsequent marks that
you put on will will save you from those so next step then let's deal with this side of the bridge
here now this is really busy and intricate isn't it and the last thing that I want to be doing
is drawing in every strut every pillar every post but what I do want to do is avoid making it look
too uniform and too sloppy so the way that I'm going to approach this we'll look at the top row
first the most important thing is that sense of perspective and obviously things from a foreshorten
point of view get closer together they get shorter as they get further into the distance
so each of these sort of squares that with a crossing is going to get smaller as it gets
further away and each vertical pillar is going to get closer together so that first thing that
I'm going to put in then is the vertical pillars so 0.1 pen because it is a small intricate area
and lines that are quite close together to begin with and then just gradually obviously not counting
these but gradually I'm just ever so slightly increasing the distance between them until when
I get to foreground past the bridge it's actually quite a large shape and because these are railings
on there they're largely see-through what I'm going to do is just take some value just down
from the bridge but not quite as dark so down from here down from this one as well and that's
just going to add to this idea that there is you know some transparency there in between the gaps
now for these smaller ones further away I'm just going to put these in as a cross
so just touching very lightly just across in the center of the square slightly stronger where it's
you know something that's behind it so obviously the bridge that's behind it and then as we get to
these couple of forward ones here and then as we get to these nearest ones these closest ones
I'm just going to take the time just to draw a more solid shape in so you know more like the
so just a series of triangles and negative shapes in the negative drawing and what this does is
it sets in the viewer's mind it or gives them an idea of what they are so that when they then look
at what just look like crosses further down they interpret them as being a little bit more than
just a cross in a box okay now we do want to put some shadow underneath each of these particular
pillars there's a rail with some shadow underneath I'm not just going to do a solid line
under each one 0.1 pen I'm going to try and do separate marks just again to give an indication
that these are separate sections within this one rail and then we can do a little bit of shadow
work on the vertical on each vertical but just on the right hand vertical it's the side obviously
that would be in shadow so spending a bit more time just on again on these first few just because
that sets a precedent of the remit for the remaining ones now we've got a shadow underneath
again I'm just going to break the shadow line up and do larger marks as I get closer longer lines
again all helps that sense of perspective the sense of foreshortening I should say
on this bottom row and strengthen this line slightly just make a little bit more accurate
so again let's separate the sections closer together and then gradually get them further
apart now for these ones here this red fencing here I do want to do a little bit of negative
drawing so each vertical is white isn't it so I've put them in dark at the moment but if I just do
some hatching to the left hand side of each one and then leave a gap between the next one
hopefully what that will do is put them in negatively so reserving the white space
and you're then left with the pillar and it just helps to break things up from always putting in
those positive marks those dark positive marks and then just above each one to get that shadow in
and then a shadow down the left hand side sorry the right hand side of each pillar
and as you get to the you know towards the end there it really just becomes
just hitting this marks now I don't know if you can see there's a little shadow area here
which is a nice little feature and it just helps to separate this area up so all I'm going to do
is just hatching marks straight across everything that I've put in there there we go and it's as
simple as that now for the rest of the drawing I'm going to stick to the 0.1 pen you know
everything's getting into the distance now we want to keep our marks nice and fine nice and refined
so for this part of the bridge just following the curvature of the lines that you've already put in
there is some kind of gantry structure underneath there I think that's going to be a nice way to
break this long shape up underneath so I'm going to leave that in so I'm just leaving a little bit
of white space you can say I put some lines some perspective lines in initially just so I know
where to leave them and then we've got this area of the bridge which is darker than this area
so this looks like some kind of a support again I think that is useful to put to separate those two
pieces because again it's just going to help to break up this
overall shape so we'll just add more hatching marks to this part of the bridge
it's going to get darker as we get in closer so just being careful not to break into
this upright of your of this bridge here because we want to keep that a nice light value
okay over this area just a little bit lighter because it's not completely white it's there's
and just deal with this by just putting in some darker shadow areas that you can see
you can see some sort of gantry crisscross gantry so you put some shadow areas in there
it's just an impression so don't get too hung up on the actual shapes of this
hey if you want to put a little bit of cross hatching on you can do I think that's a good
idea just to keep it the continuity going across the rest of the bridge again where's our vanishing
point make sure our hatching marks go towards that using the side of the pen here so I've got
more control I'm not worried if I don't get any ink coming at first I can just adjust the angle
of the pen then slightly gives me a lot of control then and then our old crisscross shapes again just
put in a few on this side really close together now because they're really going into the distance
you know until you get to a point where you basically just add in some marks just to break
up the the white of the shape and then the same structure on this end of the brooklyn bridge
we can be really quite quick with so I'm going to keep the mark making similar so I want vertical
marks and then you're just going to add in any major shadow blocks that you can see that just
give a sense of these pillars that are there shadow areas underneath where the bridge meets
don't want to do any cross hatching on this don't want that level of intricacy on the bridge that
is this far away and now let's look at the city in the background the buildings the skyline
so we want to keep this relatively nondescript all I would say is you're looking for the major
shadow shapes and the light within each of the buildings and that's all you really want to render
you can add you know the the odd impression of a window here and there but it's got to be really
kept to a minimum so I'm going to look for any of the major shadow sides of the building so this
one here is quite obvious so let's get that one in I want to keep the marks all in the same
direction so no cross hatching now just hatching marks that way it keeps everything a little bit
cleaner and a little less a little less distracting to the eye so we've got this building here which
is quite a strong shadow and I'm not taking it all the way to the bottom because there's obviously
bits and bobs going on along the shoreline that we can't really make out I always tend to get
sort of a dark value just along the shoreline so that can help to put that in as well it gives you
something to work to at the bottom that's a little bit strong so if you just use your finger just
while the ink is still wet just press on and dab off it will take a little bit of that value away
so really using the pen on the side the side of the angle there and that is helping to minimize
the flow of ink gives me more control keeps the values nice and light looks like there's some
trees there or maybe shadow it's quite hard to distinguish but it's a dark area nonetheless
so we get that in so really just very simple hatching marks quite far apart that helps to
again tell the viewer that it's a lighter value and if you want to put the odd impression of a
window in you can do but I would keep it to a minimum only just on the buildings that were
really obvious this group here I would say okay so the only thing left for us to do then is the
cabling and an impression of some water so let's do the cabling first now this is the kind of thing
that isn't difficult but if you're not careful it can mess things up a little bit so before you just
dive in and start adding cables anywhere and everywhere just have a look for the major ones
first and just look at the shape of them so this one here obviously curves around but just have a
look where the curve is so it's somewhere around this intersection between the two parts of the
bridge so if you're not confident maybe draw in with pen pencil first and I'm just going to put
mine in straight with pen so I'm going to curve around there and I'm going to ghost the line
and it's going to meet somewhere up here so ghost that line somewhere around there and then when
you're happy that that's in strengthen that line there's quite a strong line because of the shadow
underneath it it's a nice sunny day this so lots of shadows going on okay that's all I'm going to
put in I am going to put in just a few of these little um I don't know what they are but sort of
maybe collars around the actual beam itself and what that'll do hopefully is just give the
impression that it's quite actually quite a thick solid shape so again closer together as you get
further apart there we go and then these two here now these should be easier to put in but again
just look at the angles where they intersect things so we've got one here and that looks like
it carries on through so go ghosting your pen across carrying that on through this one's slightly
more converging angle mine's not but never mind nobody's going to notice we've got one that's
through here okay and then we've got these vertical lines that are very faint so what I'm going to do
is side of the pen I'm not expecting to get out any ink initially but that's okay I can build that
up so side of the pen I want really really faint lines now so real hit and miss lines there we go
and when you find the right angle it's easy then to hold the pen at that angle and just carry it
along a few more in here where there will be extra around the other side so let's get this major one
in first and this is where you may want to use the white sakura pen we'll come on to that in a moment
so you can see what that's like so angle make sure you get that right you don't want to mess things
up with the perspective at this late stage so it's intersecting around here and then the angle
is something akin to this one here so it's going to be somewhere around here okay and again it's
got these little notches on obviously where the cables come off we've got a couple of thin cables
up there so pen at an angle keep adjusting the angle till you find where the ink just starts to
and then we've got these thicker ones here as well so intersecting here roughly parallel to
that first line so put those in fairly confidently there's another one there as well okay and then I
just want to put a sense of not every cable obviously but I just want to put a sense of
some cables coming across here so make sure that you go from the point this insertion point here
where they're all inserting in and not too strong a line initially but just maybe have a look at one
dominant one so maybe this one here is coming across at this angle and then again from the
insertion point and then if you do have one to hand very inexpensive you know just a couple of
pounds couple of dollars a white jelly roll pen this is going to allow you just to add a little
bit of extra detail extra interest where this cabling is now these jelly roll pens I find it
does take a little bit of time just to get the ink flowing so just off the paper to the side there
just start to get it flowing just dabbing and then I'm just going to follow the lines that
I've put in already so using this sparingly and as you can see you might think it's hardly worth
putting in you know we're using it that little but you can maybe add a few more if you want to
maybe some of the vertical ones as well but the idea is not to is not to go overboard with it
okay so all we've got left then is the water now I'm going to put this in really really simply I
want to keep this to a minimum it's just a very slight impression so you can see there's some
shadow area underneath here so that's where we're going to focus our attention and this area here
too so around this area it's going to be very loose marks just very sort of impressionistic
wave marks almost I'm actually using a 0.5 pen here but I am trying to use it side on just so I
can get a bit more control with those marks and then as we get into the front here I'm just going
to put some bigger marks just more indicative of waves I know it's not wavy water but I think this
will work so just a few random haphazard marks here and there just underneath don't want to get
them too uniform okay I think that's enough I think that should do it let's finish things off
by putting in the American flag here we go just an impression and then one in the distance again
just nearest hint of an impression so there we go Brooklyn Bridge in pen and ink
