Game Changing Tips for Realistic Cat Drawings

Pencil Art
23 followers
If your fur always looks a little off, no matter how much time you spend,
you're going to love today's video. I'm teaching you two techniques I rely on every time.
So make sure to watch till the end so you don't miss the second one.
Okay, so the first technique I want to show you today is the one I use whenever I need soft or
lighter tone fur. Before we talk about the strokes, we need to talk about the base layer
because fur only looks good when the foundation underneath is smooth.
I always recommend creating your base with graphite powder.
Whenever you know you'll need brighter highlights later.
When you shade directly with a pencil, the graphite sinks deep into the tooth of the paper
and lifting clean highlights becomes a struggle.
Powder, on the other hand, sits right on the surface,
which makes it super easy to pull out those bright, thin strokes in just one go.
And if you don't have ready-made powder, don't worry at all.
Just grab the pencil grade you want the powder of and rub it on a scraper.
I'm using an 8B today.
You can even use a piece of sandpaper or masking tape stuck on a sheet if you don't own a scraper.
Anything slightly rough will convert the pencil lead into soft powder.
Dip your dry brush into this powder and shade the area slowly.
Use more powder for darker portions and less for lighter ones.
This gives you a smooth 3D base.
And trust me, a good base makes the fur so much easier later on.
At the end, blend this whole portion with a soft tissue paper for that smooth finish.
By the way, if you're a complete beginner and you keep throwing away your drawings
because you feel like you just can't draw, it's not your fault.
You just don't know the basics yet.
And that's exactly why I made this full course.
To help you go from shaky lines to realistic drawings step by step.
It covers everything from basic lessons to advanced techniques,
tips and tricks.
All structured in a clear step-by-step format.
So you don't have to guess your way through it.
Thousands of students are already learning and growing through the course.
And I put my course on sale for 5 days every month just for my YouTube family.
Check the link in the description or comments to see if the sale is live right now.
And get enrolled before it ends.
Now that the base is ready, let's learn the actual soft fur technique.
Grab your mono zero eraser and make sure the tip is flat.
Start flicking tiny strokes in one go using back and forth flicking motions.
If you don't have a mono zero, simply cut your regular eraser into a thin sharp edge.
It works just as well as a mono zero eraser.
Keep flicking these strokes and let them overlap each other.
Avoid placing them parallel like railway tracks
because that creates empty gaps and makes the fur look flat.
Overlapping strokes is equal to fuller, softer and more realistic texture.
Once the lighter strokes are in place, it's time to make them pop.
Just take a sharp pencil and add a few darker strokes right beside the light ones.
This contrast is what creates that natural fluffy effect and makes the fur look detailed.
And now we can apply this technique to our today's cat drawing.
Remember, this method isn't just for this cat.
You can use it on any animal drawing.
Whether you're working in graphite or even colored pencils.
Anywhere you want soft smooth fur, this technique works beautifully.
Now that you know the soft fur method, let's actually use it on the cat's face.
And I promise you'll see instantly why this technique is so powerful.
So I'm starting with the forehead.
This is where this technique shines.
Lay down the lighter fur strokes first by flicking your eraser in one clean motion.
Just like we have practiced earlier.
If your hand shakes or hesitates, don't worry.
It's totally normal.
Practice on scrap paper first.
Jumping straight onto the drawing is like going to the gym for the first time
and trying to bench your own body weight.
So always build the control first.
As we move upwards, the fur starts getting longer.
So I'm making my strokes slightly longer too.
And please don't keep the length same everywhere.
Fur that grows in one size only exists on soft toys.
Not real animals.
Since this section has lighter fur, so bring in your H pencil
to add the darker strokes between the highlights.
The trick is simple.
Place more dark strokes where the fur dips in
and fewer strokes where the fur catches more light.
Now let's move down to the mouth area where things get interesting.
This part has both light and dark patches.
And we have created the base accordingly,
so only go over the lighter portions and add these relatively shorter strokes over them.
A big mistake beginners make here is keeping all their fur strokes
in the same direction and parallel to each other.
That instantly makes your drawing look like a printed sticker.
Fur must flow with the form.
So rotate your wrist, tilt your hand and follow the curves of the face
like you're icing a cake.
Another important tip here is to clean your Mono Zero eraser after every few strokes.
When the eraser is dirty, it stops lifting graphite
and starts pushing it around like a toddler smearing chocolate on the wall.
As we are working on this portion, let's add the whiskers as well.
And for them to shine bright like a diamond,
firstly using the Mono Zero to lightly erase long clean lines
where you want the whiskers to sit.
This removes the graphite underneath and gives us a clean base
so the whiskers don't look smudged later on.
Also keep in mind to always start whisker strokes from the darker fur patches
because the contrast makes the whiskers pop sharper.
And keep the lengths different because perfectly identical whiskers exist nowhere.
Now let's bring in the indenting stylus or in my case, my trusty nail art dotting tool.
If you don't have one, an empty ballpoint pen works perfectly.
Just don't use the one you actually write with or it'll betray you mid-drawing.
I'm gently tracing over the guideline in one clean motion.
If you struggle to see the indent lines, lower your head slightly.
When the light hits the grooves from an angle, they start to glow.
Once the indentation is done, you can shade over the whisker area using an 8B pencil.
The graphite goes everywhere except inside the grooved line
so the whisker pops out automatically.
That's why this method looks so clean compared to erasing whiskers at the very end.
Keep your pencil angle low here.
A high angle will accidentally darken the whole whiskers
which is basically the drawing version of dropping food on the floor after perfectly plating it.
You can do this indentation step before adding a base layer if you want to.
I just forgot to add them at that time.
Now back to the forehead portion above the eye
and we are again sandwiching light eraser strokes and dark pencil strokes.
This is the part where the drawing starts looking like real fur.
And trust me, this is the moment you'll feel like,
okay wait, I actually know what I'm doing.
By the time you finish this section, the cat starts looking soft, fluffy and alive.
Before we get into the second technique,
let's pause for a second and bring this eye to life by giving it that glossy, glass-like shine.
Grab your 8B pencil and gently darken the areas which are looking dull.
And in this case, the upper lid and the iris looks a bit dull.
For that deep, realistic look,
layer more graphite at the top of the iris and slowly reduce it as you move down.
This simple gradient instantly adds depth.
Next, grab your Mono Zero eraser and lift the highlights from the inner corner
using tiny circular motions.
Since the highlights in this reference are soft and blended,
these small circles help give the eye that natural roundness.
If any graphite ends up spilling into the rectangular reflection shape,
just reshape it and clean it up.
You can also add this thin curved highlight line on the iris to make it look more round and shiny.
For the final sparkle, fill the rectangular reflection with a Gelly Roll pen.
If you don't have one, a regular white character pen works surprisingly well.
Once the highlight is in place,
sharpen its edges with your pencil so it blends cleanly into the rest of the eye.
Okay, so now let's move on to the second technique
which is the one you can use whenever you want darker fur.
This method is very simple.
Start by adding the darker strokes first using an 8B pencil
and use the same flicking motion from the previous technique.
Just make sure these strokes overlap instead of running parallel just like we did earlier.
Because parallel strokes leave empty gaps and make the fur look flat instead of textured.
Real fur is never uniform.
And beginners often make the mistake of repeating the same stroke over and over.
If you notice your lines looking too similar,
adjust your angle slightly or vary the pressure to keep the texture natural.
Once you have the darker fur texture in place, it's time to make them stand out.
Use your Mono Zero eraser to add brighter strokes right beside some of the dark ones.
This contrast is what creates that sharp, realistic texture.
Just avoid adding too many bright strokes
because that can make the whole area look blurry or chalky instead of clean and defined.
This technique gives you full control over depth, contrast and texture.
And it works beautifully on any drawing where the fur needs to look thicker,
darker or more detailed.
So now let's incorporate this technique in our drawing.
And we can see that the cheeks of the cat are relatively darker.
So start by laying your darker strokes first using your 8B pencil.
As I've explained earlier.
Since the fur here is longer, let your strokes stretch a little more.
A common beginner mistake is keeping every stroke the same size.
Like you're copy pasting the strokes.
Real fur doesn't grow like that.
So change the length, change the direction and let the strokes follow the form of the face.
If you ever feel lost, just quickly look at the reference and the flow becomes easier to spot.
Now once the darker base is in, it's time to brighten things up.
Use the flat tip of your Mono Zero and start dropping lighter strokes in between the dark ones.
Place them gently and follow the flow of the base you already created.
This makes the whole process feel much more natural.
Almost like you're just tracing the light.
As you move downward, slowly increase the space between the lighter strokes.
This keeps the fur feeling airy instead of overfilled.
Always remember the rule that if the area looks light,
start with light strokes using a Mono Zero eraser.
And if it looks dark, start with dark strokes using a graphite pencil of the required grade.
This tiny decision alone prevents that classic
Something feels off but I can't tell what's the problem.
And before moving on, add any final touches where the brighter strokes look dull.
Tiny adjustments here make the cheek look full, soft and naturally blended.
Alright, before we wrap this up, let's quickly bring the whiskers to life
because this tiny step changes the whole drawing.
First clean the whiskers you created with indentation using your Mono Zero slightly
and glide along those grooves.
If the eraser is dirty, it won't lift anything.
So wipe the tip after every couple of strokes.
And if you struggle to see the indent, lower your head a little.
Now to make the whiskers stand out even more,
use a Gelly Roll pen and glide it over the whiskers strokes.
Make sure to always work slowly with the Gelly Roll pen.
The ink doesn't flow fast enough and if you rush the stroke,
you'll end up with patchy lines or little gaps where the pen didn't release ink.
So always be patient with it to achieve smooth results.
Now you can make the whiskers look even more 3D.
And for that, just lightly shade the starting point of each whisker
with a light layer of H Pencil.
This little shadow makes them look growing out of the fur instead of pasted on top.
So that's both techniques.
Use them a few times and you'll see your fur improve instantly.
Also, I just launched the AHR Studios Academy.
So if you're an absolute beginner and want to learn drawing from scratch,
you can join my course here for 90% off.
So thank you so much for watching and I'll see you in the next one.
