5 Rules For Hanging Curtains & Common Mistakes to Avoid!

Little House
164 followers
#LittleHouse, #CozyLiving, #TinyHome, #MinimalistLifestyle, #SmallSpaceLiving, #CottageVibes, #SimpleLiving, #RusticCharm, #TinyHouseLife, #CompactLiving, #LittleHome, #OffGridLiving, #CabinLife, #CharmingHome, #TinyHouseMovement
A beautiful set of curtains has the power to transform a dull space into a stunning one.
Unfortunately, even the most luxurious fabrics won't enhance the room if they aren't hung properly.
In this video, I'll go through my 5 best rules for hanging curtains
and some of the most common mistakes that you should avoid.
When it comes to curtain rod or track placement, there are two main options that you can go for,
either ceiling mount or face mount. Ceiling mounted curtains create a seamless floor-to-ceiling
aesthetic while face mounted curtains are suspended from a wall-fixed rod located above
a window. Generally, ceiling mount curtains are used in more contemporary spaces as they have a
cleaner aesthetic. Face mounts, on the other hand, are more commonly used in classic and
traditional spaces, but they're equally suited to contemporary homes with more minimalist hardware.
With face mounts, people often make the mistake of mounting the rod too low,
making the window look smaller than they actually are or disproportionate in relation to the curtain
size. This often occurs when people purchase curtains that are too short, so they have to
lower the rod to make up for the lost length. To avoid this common mistake, make sure the
curtain rod is mounted at least halfway to 2 thirds the height between the top of your window
and the ceiling. This will draw your eye upwards, giving the illusion of a taller window and ceiling.
Any lower than halfway will create an unbalanced look in the room and the illusion of short
ceilings. You can even bring them all the way up to an inch below the crown molding for a bigger
impact. Another common mistake is purchasing curtain rods that are too short for the window
length. This means that the curtains cannot be drawn apart without the stack covering the glass
and blocking out light. This will not only make the window look smaller, but also make the room
feel smaller as there will be less sunlight streaming in. Avoid this mistake by extending
your curtain rod 6 to 10 inches, approximately 15 centimeters to 25 centimeters, past the edges
of your window. Alternatively, measure your window length and multiply it by 1.3 to add a
third extra length of the window to the curtain rod if your space allows for it. If you have no
wall clearance on either side, go full length. This will give a dramatic look as the whole
wall is covered by fabric when closed, while allowing for maximum natural light to enter
when drawn apart. For corner windows, you can get one with a corner rod connector to get a seamless
look. There is also the option to just butt them up together if you're using ceiling tracks,
or get a seamless curved track if you decide to go custom.
Curtain drop is the length of the curtain from the rod to the bottom hem.
There are three main types of drop, including float, kiss, and puddle length. Float curtains
do not touch the ground at all, and hang less than an inch above the floor. It is a modern and
minimalist aesthetic that can highlight a beautiful floor and also gives a sense of visual
airiness to a space. This curtain drop is the easiest to maintain, as they don't accumulate
dirt or dust like other drop styles. Kiss curtains barely touch the floor and hover with just a
millimeter or two between the curtain hem and the ground. They are the hardest to accomplish
because you have to take super accurate measurements, but they give the most impressive
and custom look. The gentle touch of the curtain with the floor facilitates a soft transition
between the wall and the floor, which has a type of room expanding effect.
Puddle curtains have 2 to 4 inches of fabric, which, as the name suggests, puddles on the
ground. The puddle drop has a romantic and old world feel as the fabric pooling on the ground
adds a sense of luxury and opulence to the room's ambience. Additionally, high quality,
heavy weight fabrics such as velvet or washed linen are usually used in favor of lighter fabrics,
which adds to the luxuriousness of the atmosphere. The downside is that puddle
curtains tend to collect a lot of dirt and dust. Be careful not to puddle excessively,
because they will just look messy and become a tripping hazard. They'll also look like a mistake
instead of something intentional, so try to stick to the guideline of about 2 to 4 inches of excess
fabric. When planning your curtains, it is important to choose one of these drops, otherwise
your curtains will either be too short or too long. Most ready-made curtains are 84 inches or
96 inches long, however, the standards may vary by country. Some places will even sell extra long
curtains that are 108 inches or 120 inches long, but if you want anything longer than this, you'll
have to get it custom made. There are also short curtain drops like 72 inches, but I find that
these are better for specific applications, such as hanging curtains above a built-in bench under
a window. If you're buying ready-made curtains, I recommend getting ones that are longer than
the distance of your curtain track or rod to the floor. For example, if you have an 8 foot ceiling
and your curtain rods are installed 6 inches down from the ceiling, the distance from the ground to
the rod will be approximately 89 inches. In this case, don't get the 84 inches curtains. Instead,
get 96 inches curtains. You can then hem the curtain or fold the top if you're using a
to get the float, kiss, or puddle length. At the end of the day, you can always reduce the length
of your curtains, but you can't add more fabric. But what about short curtains or half-length
curtains? This is something that is not often talked about. My take on this is that there's
nothing wrong with this, but it only works in specific situations. If you live in a log cabin
or cottage, short curtains can be suitable and really charming. It can also work in very casual
spaces like an attic dormer or paired with a window seat. You also have to be careful with
the length. Have it in, around, or just slightly under the window sill and it will look much more
considered. Curtain length gets really tricky if you have raked ceilings. Your options are to either
hem them manually if you are very skilled or have them custom made. As you can see with this
curtains I recently did for a client, the fabric was cut according to the slope of the ceiling
to get the base to be flat against the floor. If you have double height ceiling with super
tall windows, well, you're both in luck and out of luck. Good news is you can get them custom
made to your ceiling height and they will look really dramatic. Just look at some of these
beautiful projects. But as you can imagine, it will likely cost a fortune as you need way more
fabric and professionals to install them. Many people also make the mistake of purchasing
curtains that are not wide enough. You'll know that you've bought the wrong panel width if when
closed, your curtains cover the windows but are taut and don't have any fullness. This makes it
look really cheap and is one of the reasons why many people often have the misconception that
curtains make a room look cheap. So it is important to avoid this mistake. Instead, buy curtain panels
that are 1.5 to 2.5 times the width of your windows. For example, if you have a 2 meter long
window, get 3 to 5 meters of curtain fabric. The extra fabric will make them look full and plush
and give you the desirable wavy fold. If you're buying ready-made curtains, you may have to buy
four panels and place two on each side. This is totally fine as you can't really see the break
because they're so full now. But you can always bring them to a tailor to sew them together.
In most cases, people underbuy curtain fabric because of the cost. If cost is an issue, I'll
suggest looking for cheaper curtain fabrics at Ikea or from Amazon as they have many affordable
options. Cheap fabric done right will still look much better than expensive fabric that is done wrong.
Some of the most commonly used curtain materials are silk, linen, and cotton which are natural
materials and polyester and velvet which are man-made materials. While I do love natural
materials, they're not always the best choice. Silk is very expensive and will disintegrate with
exposure to sunlight, especially if unlined. Linen is beautiful but wrinkles very easily.
They're also notorious for stretching and shrinking in humid environments. If you know
what you're doing, then these fabrics can be a great choice. Otherwise, my suggestion is to get
a synthetic blend fabric which are typically made from natural materials like cotton and linen
combined with polyester. This will give you the linen look that drapes nicely, are more
There are also full polyester fabric that looks like natural material and doesn't look cheap,
but they tend to be more stiff than blended fabrics. I'll also avoid using full polyester
in the kitchen as it can easily absorb odors. The three most popular pleat types are the ripple fold,
otherwise known as S-fold, pinch pleat, and grommet style. There are also many others like
tailored pleat, inverted pleat, goblet, rug pocket, and tap top. However, I'll just focus
on the main three for this video. The ripple fold, otherwise known as the S-fold, is one of my
favorites and I use it in many of my client projects. It gets its name because the fold
results in gentle S-curves. Ripple fold curtains are usually installed on a track as they have
pendants installed in equal distances that click into the track, resulting in a symmetrical fold.
This also makes them super easy to open and close as they glide smoothly across the track.
I especially like this look with sheer fabrics as they instantly elevate the space at an affordable
price. In case you're wondering, you can get tracks with a face mount that gives you a similar look to
rods. Pinch pleats are a more classic style. While they exude the classic elegance, they are also
very versatile and can be used in any home style from traditional to contemporary. The pinch pleats
are usually located 4 inches from the top of the curtains, which results in a gathered look
extending down the face of the curtains. Grommet curtains have rings pressed into them approximately
1 inch from the top. The rings are then threaded through the curtain's rod in an S-shaped pattern,
which creates deep dramatic folds. The main downside of this style is that the rings can
make it difficult to pull the curtains back and forth compared to an S-fold system on a track.
If you have grommet curtains, you may also experience uneven folds when they're drawn apart.
A really good hack that I found online is to use toilet paper roll at the back to get a more
even and symmetrical look. Credit to lonefox for this genius hack. The most difficult part of
curtain installation is getting the curtain rods level, especially when the rod is longer than 2
meters. My hack is to use a laser level. If you don't have one, I highly recommend that you borrow
one or buy one. While they're not super cheap, they'll save you heaps of frustration which is
worth so much more than the cost of the laser level. Stud finders are also super helpful,
so you can get the rods mounted right on the first try. Wall studs are typically long vertical pieces
of metal or timber that form the structural support for the frame of a wall. You should
put the majority of your curtain brackets into studs, as it is much more structurally sound than
putting them all into a drywall. Most stud finders will light up red when they're hovered
over a stud in a wall, which makes installation that much easier. I hope that these rules for
hanging curtains were helpful. Remember to like this video and subscribe if you haven't already.
Thanks for watching and I'll see you in the next one.
