Full Blender Tutorial - Textured Medieval House

Decor Design 3D
20 followers
Dec 2, 2025
Hey everyone, welcome to my new tutorial. Today we are going to create this stylized medieval hat
and I really hope you will enjoy this one and if you do please don't forget to leave that like
and if you're new around here hit that subscribe. Now let's jump into Blender and let's just select
the light here, press X, delete and we'll actually use the cube this time so let's select it,
tap into the edit mode and we'll press G then Z and 1 to move this one meter up so the urgent point
is at the bottom and now we can tap out and press S to scale this up a little bit so it's at least
four meters, maybe a little bit more and now let's tap into the edit mode, press 3 for face select,
select the top face, press G then Z and move this down a little bit like this and now press 2 for
edge select, select these two edges so hold shift, select the other one, right click and subdivide
and now we can just grab this one, press G then Z and move this up to create the shape we want to
make. Now press 1 for vertex select, select these two, press J to join them and on the other side
as well and now let's press 3 for face select and we're gonna separate some of the geometry and get
rid of the one that we don't need so on the bottom let's just select the face, press X and delete it
and now let's select the top faces of the roof, press P and separate the selection and let's do
the same here so select the shield here on the other side as well, press P and separate and now
here we can just press CTRL R, create a cut here in the middle, right click to release and press
CTRL B to bevel and now let's press CTRL R and create one near the top here and again here in
the middle and now let's press CTRL R here, left click, right click to release and then CTRL B
and create one like this and this will be the door and window so we can press 3 for face select,
select the window, hold SHIFT, select the door faces and press ALT E and extrude along normals
and let's extrude it inside like this and additionally here near the bottom we can just
delete this one by pressing X and now we can simplify things a little bit so let's tab out
let's select these shields and we can go into the modifiers panel, let's tab into the edit mode and
we can just delete the back one so press X and delete it and we can just go ahead and add mirror
modifier and instead of X axis we'll use Y axis so it's back there and let's do the same thing
here so going to the edit mode, select this one, press X, delete, tab out and let's add that mirror
modifier here as well and here we'll leave it at X and now enable clipping. If you just started
Blender and you have trouble following tutorials like this, make sure to check out my courses as
well where in addition to the step-by-step instructions you also get full in-depth
explanation of all the tools and all the steps and you get to learn everything from simple
opal design all the way to full character illustration, textured environments, even a
little bit of sculpting and hard surface modeling so if you're interested please check out the link
in the description. And now we can tab into the edit mode, press CTRL R, left click and right
click to release and press CTRL B to create the bevel just like that and now ALT click this bottom
edge, press G twice to start sliding up and hold ALT key and slide this down just like this and
now press 3 for face select, select this one in the middle, press P and separate the selection again
and now we can press 2 for edge select, select these two edges on the sides, press S then Y
and just scale them outside like this and now press A to select all and ALT E and extrude along
normals and it will create beams like this and we don't need to go so far so something like this
here because then we can press 3 for face select, select the face on the bottom and press ALT S
and just move this down and now if you think this is exaggerated a little bit too much you can press
2 for edge select, select the bottom one, press G twice and just slide it back here a little bit
so the slope isn't so harsh and do the same thing here okay and now on the other side we didn't
touch this so let's toggle the x-ray, select everything here on the other side, press X and
delete vertices and we'll introduce another mirror modifier here and this time disable X and enable Y
so this way just by creating this one object we were able to create a supporting structure for
the whole roof. Now let's toggle the x-ray back, let's select the middle part of the roof, tab into
the edit mode, select this edge, press G twice and slide it back a little bit so we leave some space
there. Okay and we'll come back to the roof later so let's create another set of beams so tab out,
select the bottom structure, tab into the edit mode, press 1 for vertex select, select this one,
hold SHIFT S and snap cursor to select it, now we can tab out and let's press SHIFT A and we can add
a plane, tab into the edit mode and just scale it down something like this and now we can tab out
and press G then SHIFT Z to move it additionally closer here and this way we'll create the beam
on the corner there so tab into the edit mode and just press E to extrude this up and this is
probably too thick so we can just press A and then SHIFT Z to scale this on X and Y axis
like this and now let's look from the front, toggle the x-ray and select the top and hold
CTRL ALT and SHIFT and S and then Y to skew it like this and then press G then Z and move this down
so it kind of better follows the structure there and we can additionally press G then Y and move
it towards the front here so it doesn't go out this way just like that and now we can apply
the mirror modifier here as well and we can use the eyedropper to pick the house and then enable Y
as well so we now have each corner covered and let's create the beam right here in the middle
so tab into the edit mode there, 2 for edge select, select this one, hold SHIFT S and snap cursor to
select it there, tab out and again we'll create a new plane, tab into the edit mode, scale it down
by pressing S and then RX and 90 to rotate 90 degrees along X axis, let's confirm this,
press S then X and scale it up and now we can press E to extrude this and additionally we can
press A and scale it by pressing S then X again on the X axis so it covers the whole part there
so this will be the structural support now again we can create a mirror modifier here and use the
house as the center and then disable X and enable Y and it jumps to the other side and now I want to
create some supporting structure near the bottom here so let's select the house here, tab into the
edit mode and we can just press 3 for face select, ALT click this loop all around, press SHIFT D to
duplicate, right click to release and then P and separate the selection, tab out and just select
the new object by clicking through the objects on the viewport, tab into the edit mode and we'll
just modify this and delete some parts so I want to delete these faces right here, press X and delete
them and then press 2 for edge select, ALT click this loop and press G then Z and move this down here
and now let's add some more geometry here in the back so press CTRL R and increase number of cuts
with the mouse wheel to for example 3 and here let's do few of these cuts one by one and now
press A to select all and ALT E and extrude faces along normals and let's extrude this outside like
this and we can additionally press S for even scaling and create something like this, now ALT
click this loop again and press G then Z and move this down like this and additionally we can
introduce some variation here so we can select some of these edges, press G then Z and move this up
here as well, here we can select both so we have some nice stylized results and now let's press 1
for vertex select, toggle x-ray, do a selection down here, press 3 for face select so all the faces
should be selected, press X and just delete them so we keep this nice and optimized and now let's
take care of the door and the window so tab out, select this, tab into the edit mode and we can ALT
click this loop, press SHIFT D, right click to release and P and separate the selection, tab out,
select the new object and now tab into the edit mode, press A to select all and ALT E and extrude
along normals and additionally we can press S for even scaling and do something like this and now
we can just select these faces in the front, press G then Y and extrude them out and now press 2 for
edge select, ALT click this loop and again we'll press P and separate the selection, you don't need
to duplicate it if it's not faces, if it's only edges, tab out, select the new object, tab back in,
press A and F to fill and then G then Y to move this back inside like this so this is the base
for the door and now for the window we'll do a similar thing here so tab into the edit mode,
press 3 for face select, select this face here, press P to separate the selection, tab out, select
the new object, tab back in and press CTRL R and create a loop cut down there, now press 3 for
face select, select this one, press P and separate the selection and let's press A and then I to
inset and create an inset like this, now select the bottom face, press X and delete it, 2 for edge
select, select this one and here we're gonna switch to vertex snapping, press G then Z and hold CTRL
and snap it to the bottom vert there and now before we extrude this, press 3 for face select again,
select this one, press P and separate and now A and extrude this outwards like this, tab out,
select this one, tab in, select all, press G then X and move it towards the front, now tab out and
select the last one, tab into the edit mode and extrude it all the way here, now we can add some
inner frame so tab out and we can just slice this up a little bit so let's press SHIFT D to duplicate
it, tab into the edit mode and press CTRL R and create a cut here in the middle, right click to
release and we can do the same thing here, now hold ALT and SHIFT, select this one, press CTRL B
and just create the bevel here and then 3 for face select, select these faces, press X and delete them
and now these two and press P and separate them because we want them as a separate objects and
now press A and E to extrude, tab out, select these, tab into the edit mode and then extrude these
as well but don't go all the way so something like this should look quite nice, now let's
select the shield here, tab into the edit mode and we can toggle x-ray and let's press 2 for edge select,
select the bottom one, right click and subdivide so we create one vertex there and now press 1 for
vertex select, select these two and press J to join and now let's select the one on the other
side, press X and delete and we'll add another mirror modifier here as well, press 1 for the
do a cut like this and then confirm with ENTER and now press CTRL R and create two more cuts,
increase with the mouse wheel, right click to release and finally we'll press 2 for edge select,
select these three edges and just press V to separate them but right click so they jump right
back but these are now separated so we can press A and extrude this and you will see why just in a
second, like this, now let's go to the overlays and enable face orientation and we can now toggle
the x-ray and we'll see if we have some flipped normals and indeed these are flipped so press A
and SHIFT N to recalculate and the door, they'll be similar story so let's select it, so enable
x-ray view, press 1 for vertex select and we have these two that we don't need so press CTRL X to
dissolve and now CTRL R and increase number of cuts to 2, something like this and similar as
before press 2 for edge select, select these two and press V to separate this, now A to select
and E to extrude and now we can disable x-ray view and still this is flipped so press A and
SHIFT N to recalculate the normals and this should all work nicely now and let's add some
bevel modifiers, so let's tab out, let's select the roof beam and let's collapse the mirror
modifiers and let's add the bevel and here we are going to increase the segments to 3
and just reduce the amount so it's nice and sharp like this but we still keep some of that curvature
there and now in the geometry section let's switch this to arc and in the shading let's enable
harden normals, right click, shade smooth and now we're just gonna select everything here
but deselect the roof so hold CTRL and deselect the roof and I think we should deselect the house
as well so hold SHIFT and deselect it by clicking twice and now let's hold SHIFT and select the
beam again so it's highlighted in yellow and we can now click this little triangle and copy to
transfer the same bevel modifier to all of these other objects, right click and shade smooth
so now we can just go around the scene and fine tune all of these bevels so for example here
we might need to adjust the corners here as well but here in the middle this is merged so let's
just uncheck the merge on the mirror modifier and it should start working nicely here
now let's select all of these window parts and hold ALT key and then reduce the amount
and you will see it will reduce on all of them and finally we can go ahead and create some roof
but before we do let's hold SHIFT S, snap cursor to world origin, let's press SHIFT A and we'll
create a plane, tap into the edit mode, press S to scale it up like this and right click and
subdivide and press SHIFT R to repeat this few times like this, now press 1, select some of these
vertices and we can enable proportional editing, press G then Z and increase the falloff with the
mouse wheel so we create some bumps and you know a little bit of a terrain here like this so it
looks a little bit better and now disable proportional editing, press 2 for edge select,
ALT click this loop and then ALT and SHIFT and select all of these others, press E then Z
and extrude this down and then press S then Z and 0 to flatten it out, press G then Z and move this
up so this is roughly a cube in the corner and then we can press E then Z and continue the
extrusion and now if you tab out and press CTRL 2 that will add subdivision modifier and create this
nice smooth surface, we can right click and shade smooth and this will create the base for the
diorama and now let's hold SHIFT and right click here we're gonna create a shingle for the roof
so let's press SHIFT A, add a plane, tab into the edit mode and press S to scale it down like this
and now let's tab out and let's modify the rotation so we'll need to enable some snapping
so let's enable face project and align rotation and now if you press G then hold CTRL it will
snap on the surface and we can place it like this and now we can go back into the edit mode by
pressing tab and modify this so let's select this edge, let's look from the front, enable x-ray view
and we can just press E and extrude it like this so it has a little bit of an angle and now press
CTRL R, increase number of cuts with the mouse wheel here, left click and right click to release
and now press 1 for vertex select, select these two and press G twice and slide them back a little
bit like this and now press A to select all and ALT E and extrude along normals like this
now press 3 for face select, select these three faces right here, we can disable x-ray view
and press ALT S to make this a little bit more chunky like this and now let's tab out and before
we duplicate this let's add that build modifier here as well so we can just hold SHIFT, select
for example the window and just transfer the build modifier here, select this and now increase
the amount, right click and shade smooth so we have something like this here, now press ALT D
but don't click anywhere, press immediately Y so it starts moving on Y-axis, place it right here and
now before you do anything press SHIFT R so you can repeat the whole operation like this and now
you can decide whether you want six of these or seven and you will make them a little bit smaller
so i think seven will look nice so i will just select them all, press S to scale it down and then
press G then Y to place them a little bit better here and we can look from the top by pressing 7
on an armpit and here you can better see how it's aligned and how much you need to scale this
so now we can just look from the side by pressing 3 on an armpit, press ALT D then Z and hold CTRL
to snap it on the roof like this and now ALT D Z and hold CTRL to snap this again and i will do
this several times, unfortunately i cannot repeat this by pressing SHIFT R but this is what you
should be able to do in a short time and now let's look from the side, select all of them like this
and now of course the roof is selected as well so we can hold CTRL and deselect this
collapse the bulb modifier and let's add mirror modifier here and let's use the eyedropper tool
and the house to mirror it on the other side and now you can see this is only for the highlighted
object but here you can just quickly copy to select it and you will have it everywhere
and now we can just click twice here to select the roof, tab into the edit mode, we can enable
x-ray view, press 2 for edge select, select this one, hold SHIFT S, snap cursor to select it
and now tab out and let's press SHIFT A and we can add a cylinder here and let's modify the
number of vertices to something like 16, tab into the edit mode, press S to make this smaller
and then R X and 90 degrees, let's confirm, let's look from the top and we can disable the x-ray
and press S then Y and scale it up so it kind of covers the whole shingle like this, now look from
the front by pressing 1 and enable x-ray again and now we can press 1 for vertex select and here
you can see how far this needs to go so it goes inside the shingle so we can just select all of
these vertices, press X and delete them to have something like this and now we can just select
these, press S, make this smaller, press G then Z, move this down and press CTRL R and increase
number of cuts with the mouse wheel like this and then press S then SHIFT Y to scale this on X and
Z axis and then press G then Z and move this down so there's you know a little bit of that shape
there and now we can press A, ALT E and extrude along normals and we can go inside like this, now
disable the x-ray and we can see we have flipped normals so press A and SHIFT N to recalculate them
now tab out and let's hold SHIFT, select the shingle and copy the bell modifier here as well
now select it, right click and shade smooth and we can now make it larger or smaller and now let's
look from the top by pressing 7 on an armpit, press G then Y, move it somewhere here and press ALT D
then Y, try to move it in the middle of the shingle and then SHIFT R so you can repeat it seven times
and you have a roof like this but of course if this is too small you don't need to follow the
number of shingles so i think it will be better i think it will be better if this is larger
i will move it right here and then try to place just four of these like this then maybe make it
larger and move it back here i think it will make a little bit you know nicer stylized result
if you want some variation in the roof shingles you can look from the side
select them all but again we'll need to deselect the roof structure here make sure all of the
shingles are selected now you can hit slash on an armpit to isolate this then switch the pivot
point to individual origins and let's enable proportional editing and random and now if you
select just few of these and press R then Y you can kind of randomly rotate them and just make
sure you use the mouse wheel to make this influence quite large but you can see how they're rotating
at different angles here and there and now you have some variation in the roof so let's switch
this back to median switch this back to smooth and disable the proportional editing and hit slash on
an armpit to exit the local view and basically our medieval hut is ready and now let's press
shift a add a plane let's look from the front press G then Z move this down here and just make
this larger by pressing S so we have some background there and hit zero for the camera view and now
press N for the side panel and in the view settings enable camera to view and now just
scroll out with your mouse wheel you can now use your viewport controls to place the camera
and i think something like this should work nicely now let's disable this and with the
plane still selected make it larger so it covers the whole camera bounce like this and now let's
expand this bottom part and switch this to shader editor i want to create some nice materials here
so let's go to render settings switch this to cycles i will enable gpu denoising and use gpu
for the final denoising and then press ctrl b to limit the preview only for camera bounce
press shift a and add sunlight here press G and Z move it up a little bit even though the distance
doesn't really matter here and just press R and rotate it a little bit and increase the strength
to something like three and let's preview this and we'll modify the lighting but for now i want
this to create the material so let's create the background create the new material i'll call this
bg and just make it darker and increase the roughness all the way to one and now i want to
highlight some edges so let's select the beam let's zoom in on our shader and i'll press shift
a and search for ambient occlusion node place it somewhere here and enable inside only local and now
introduce some add node and just subtract this from one so make sure you pick subtract and then
duplicate this and use greater than and plug this right here and you can preview this node
and see what that does and now let's just decrease this distance
and increase the threshold so we create some nice edge detection here
just like this and now of course i don't want the same material everywhere
but since this was the default material but we can just duplicate it here and there
as we go through this um so let's focus on this material right now and let's create the
noise texture here right here and let's press shift a let's search for mapping
and coordinate texture coordinate and let's just plug uv here in the vector and plug this here and
preview our noise now i'll press shift a and let's search for ramp plug it here and let's just compress
this so the noise is really compressed and let's increase the scale so we actually see something
happening there now this looks quite messy but this will get better because we can increase the
detail and roughness and now compress this even more and now let's tab into the edit mode
press 2 for edge select select this one press u and mark seam and now let's select these three
right here press u and mark seam now select all u and unwrap angle based and now we can
expand this window here and switch to uv editor so we can actually see our beam unwrapped and now
we can just select this here press s then y and scale it like this it will kind of protrude the
texture right here it will create these nice streaks and then we can further modify them
by applying different ramp configuration like this and this will create you know a nice
you know wooden grain here um and it's all procedural let's now tab out and let's plug
this here let's press shift a will create a color mix color node plug it here and now plug this into
the factor disconnect and let's find some base color for the wood i will desaturate this a little
bit and make it a little bit darker like this now press ctrl c and ctrl v to drop the color here as
well and now let's just make it brighter like that and now additionally let's press shift a
another mix color node and we'll plug this into the factor and play with the color of the edges here
like this and additionally we can just play with these settings with the threshold and distance
okay and this way we got nice procedural cartoonish wood and now we can just go around
our scene and apply it and change the uvs so first of all i will remove it from the house
and from this and here let's add some uv mapping so i'll tab into the edit mode
alt click this loop hold alt and shift select this one as well press u and mark seam enable
x-ray view alt click this loop in the back press u and mark seam and finally press 3 for face select
and just select these two press u and mark seam and again u and unwrap angle based and now i can
see these edges are quite dense here so first of all let's rename this to wood and then duplicate
it so we'll get another copy and we can play with the threshold for smaller objects like this
and now tab back into the edit mode and we can compress this
like before so we create that nice you know grain like this let's modify this even further
okay and now we'll use the same material here on the door tab into the edit mode and here we can
look from the front by pressing one on an armpit press a and u and project from view
and then collapse this but again i think the edge detection is too strong there so we can
modify this even further and make it really subtle for these smaller objects like this
and now back in the uv editor we can just compress this and this will work nicely
okay and finally i will add the same material here and for this one i will tab in
press 2 for edge select ctrl alt and click to select all these edges
mark seam and then press 3 select the bottom face and mark seam and then we can unwrap this
and finally we can press s then y and compress this so we get this nice grain and here this will
be completely same as with the door so just mark these seams and this one in the back
unwrap this and make sure all of these are pointing in the same direction so i'll just
hit l hovering over these islands press r and 90 to rotate 90 degrees and it doesn't really
matter where you place them because now we just select all press s then y to compress
so we got something like this and here we can just look from the side here
tab into the edit mode press a to select all and unwrap project it and then collapse this
and probably we'll need to create another copy and just decrease this distance
and in the uv editor find some place where the grain actually is like that and here let's do
the same thing project from view but here we'll rotate it 90 degrees and collapse
and of course we can switch this to this other one
and play with the threshold and distance as well okay and now select this one remove the material
let's create a new one and we'll create an emission let's make it stronger and a little
bit warmer like this and now for these beams let's tab into the edit mode press 3 for face
select select these two faces press u and mark seam now press 2 for edge select select the edge
in the back press a and let's unwrap this and again i will collapse this and apply one of these
materials and do the same thing here basically unwrap and collapse okay and here let's look
from the front tab into the edit mode press a and let's project this let's use the second
wood material and just collapse this as well like that and now we can just move it up and down
to find some better structure okay i really like this so now um let's select this part right here
and we'll use the wood material but just duplicate it rename it to stone and here i'm just gonna
remove the uvs and here i'm just gonna plug object mapping and change the color so first let's try to
just desaturate this and this already looks much better so we can use the same stone material here
duplicate it rename to wall and basically just change the colors so it's a little bit warmer
and probably a little bit brighter so here we can go brighter as well
something like that and we probably don't need the edge detection here
so we can just press ctrl x to dissolve this and leave only this setup right here
and for the roof we'll use we'll use the stone material duplicate it now of course
we'll reduce this edge detection distance and play with the threshold so we get some
interesting look here and use the same material right here and let's rename it to roof
and of course we'll use different material here so we can go something like dark red
then make this part brighter and this part even brighter and if you want to quickly modify this
we can just plug in the hue saturation and just shift the colors using this slider
to see if some better shade of the roof would look better something like this maybe
a little bit desaturated okay and finally you can also play with the texture a little bit
the scale and of course all of these have now the same structure but if you're only working
on a static scene and the camera won't be moving you could use the camera mapping
it would basically make all of this different but as you rotate you would see this is changing
so it's not optimal for animation of course but for something very simple as a simple illustration
this could work and now finally i'll select the terrain and use one of these to duplicate them
call this ground and change the colors increase the roughness and of course play with the scale
now finally let's look from the camera select the background and let's find some nice color
that works with the rest maybe something like this very subtle and warm and now we can select
the sunlight and rotate it to create more interesting shadows here on the side then
hold shift s reset the cursor we probably won't need the uv mapping anymore or this part here
and let's press shift a and we'll add an area light press g then z move it up make it larger
let's increase to something like 1500 and we can now switch to 3d cursor press r then x rotate
towards the back and then r and z so we have some backlight here press g then z to go further away
a little bit and now we can make it much stronger and now you can either make it cold or warm
depending on what you're going for now this wouldn't play that well with the background so
let's change the background okay and finally we can duplicate this press z to go further down
press alt r to reset the rotation make it smaller and go even lower to create the backlight
on the background there and increase to 10k for example and change the color to something more
neutral yeah i think this will work nicely with this scheme and maybe this color here
can be a little bit more subtle a little bit more desaturated like this okay i really like that so
let's now press shift a let's add a cube let's scale it up so it covers the whole scene like
this and now let's create a new material there remove the surface and add principle volume
and let's reduce the density to something like 0.015 so it adds a little bit of that fog
maybe this is too harsh still so something like 0.01 and now in the render settings
color management you can increase the contrast so something like medium high or high contrast
and play with the exposure to mitigate some of that fog um but the fog will really help to blend
the scene together and now in the world settings you can also play with the world color to add some
ambience right here with this violet shadows like this and now if you select the fog and play with
the fog color as well it will help you blend the scene even better and now i think something like
very high contrast would work the best so that's it for today's illustration and looks like my
camera went out um doesn't really matter too much so i will now go ahead and finish this scene with
some details so it really comes to life and i will record this as time lapse so if you really want to
finish this scene you can just follow along and see what i'm doing on screen here but those will
be probably the same techniques that i used up until here so you got all the important information
to be able to follow along and i really hope you enjoyed this one and again if you did please
leave that like if you're new around here and want to learn more like this in the future
hit that subscribe thank you all for watching and have a wonderful day
