Improving The Highlights In Your Painting

Animals D&P
106 followers
Dec 2, 2025
So have you ever noticed how your highlights might feel a little bit dull or flat to you?
There's a few simple steps we can take to really breathe life into those highlights,
bring more depth and make them glow, make them pop a little bit more.
It kind of takes your painting to that next level, really brings an extra level of realism
to your paintings that we couldn't do without the use of glazing.
So you could do this with acrylics, but it's not quite as easy.
I've painted this in acrylics thus far, and now I'm switching to oil paints, but if you
painted your painting, this would also work.
If you've done an oil painting and let it dry, you'd basically be at the same step that
I'm at now.
So I'm using Gamblin Artist Oils along with their medium, Galkide Medium.
This isn't a plug-in for Gamblin.
There's a lot of wonderful oil companies out there.
So pick your favorite brand of oil paint and your favorite medium.
I like Galkide Medium.
It's just an alkyd-based medium, such as Liquin from Winsor & Newton.
So we've got our palette laid out, and we're going to be using Titanium White, Cadmium
Yellow, Transparent Earth Orange, Cadmium Red, and Ivory Black.
So we've got everything set up.
Let's get to it.
And I've also got a small jar of some Mineral Spirits.
I'm using just an odorless Mineral Spirits.
And I want to get a little bit of that on my brush.
And what I'm basically going to be doing is glazing for the most part.
I'm going to be glazing at this point.
So we've got some Mineral Spirits mixed with the Galkide Medium.
And I've been playing with this a little bit so far, just trying to figure out what I'm
going to be doing.
So basically, I'm going to grab, I'm going to start with the grass, I'm going to grab
some Transparent Earth Orange, along with some Red and Yellow, just to give that a little
more vibrancy.
And I'm going to mix in a lot of that medium, so it becomes very transparent.
And what I'm going to be doing is taking that transparent color, that kind of earthy orange,
you can see that we've got some highlights in the grass and also some darks.
But that transition, just kind of flat.
Everything is kind of flat looking because we don't have a lot of saturation in these
colors.
It's really hard to get it that way with acrylics.
And so now that we have the texture of the grass, so we've defined what our grass is
going to look like, we basically use this color to saturate.
You can see as I add that on, how that just colorizes what we already have.
Very simple.
I'm going right in that transition area between the darks and the lights, and I'm saturating
those colors.
Now this glaze is going to make things appear deeper, it's going to give it a glow, things
are just going to have more depth to it, as well as color.
That's really what we want to get.
That's going to make things look like they're actually lit by the sun.
So just by that small amount of color, that paint, you can see how all of a sudden we've
created a very nice glow effect to that grass.
Now before I get ahead of myself, I want to add a bit of glow to the perimeter of these
objects, the grass and the deer, before I get into the colors.
So what I'm going to do is I've got a second brush here, this is my scrambling brush by
Artist Loft, just a nice round, stiff but soft brush that I can blend with.
So what I'm going to do is grab more medium and also some mineral spirits, mix that in.
Get a good mixture of that.
I'm going to take some white, we've got a lot of that medium mixed into it, and we'll
grab some yellow and red, this is kind of an orange tone, not much, and we're going
to mix that into our white, just to give it a bit of color.
And I'm going to load up my smaller brush.
Now what I'm going to do is I'm going to work on all the areas with the highlights.
So we've got the highlights along this edge of the deer, and of course we've got the highlights
on the grass.
What I'm going to do is I'm going to go on the outside of those highlights, you can see
that color going on.
Now of course if you're an acrylic painter, this takes a little bit of courage because
normally this would be dry by now, but we don't have to worry about that, we can just
get it on there and prepare for what we're doing.
So this is not going to dry on us, we're not going to be stuck with it.
I'm going to grab some more white, just maybe brighten up some of that area up through here.
Perfect.
Okay, now I'm going to take my dry round brush, watch how we can just fan this around.
Fan it out, blend it out, see how subtle that becomes.
But we can still see it, we can see there's a nice glow right along that highlight.
Same thing down here.
We don't want it to be too powerful, we just want it to give us that nice bit of effect.
It just kind of enhances that.
I'm going to add a bit more white to this.
Really simple to do, and it may not seem like much right now, but we'll make a difference
here once we get our highlights finished.
So I'm going to add a bit more on the rear legs here, blend that out.
Okay, I'm going to take the same color, load up my brush again, and I'm going to go down
along the top of my grass, see that color going on, and maybe I might leave it out of
this area because we've got more highlights through here, so I want to keep the focus
on where we have our brightest highlights.
Okay, it looks sloppy, but now we can take our nice round blender brush, just pat it
around, fan it out, create a nice glow.
This is something that will work for just about anything that you have highlights on
in your painting.
It's a great way to use oils to just enhance your acrylic painting, or even if this is
an oil painting and you've let it dry and you've got it to this point, you want to add
a final touch.
This is just a good example of how we can use glazes to enhance our highlights.
Okay, just about there.
Perfect.
Now you can see we've got a nice glow, very subtle, but noticeable.
All right, now I'm going to continue with a little more work on the highlights themselves.
Okay, now I've got some fresh medium, and I'm using an old brush just to mix the paints
because I'm going to switch to a liner brush, and this just has a nice sharp point to it,
so I've got some medium, and I can probably use some of this orange that we've already
made.
I'm going to grab some of this, kind of a dirty orange look.
I'm just going to pull some medium in there.
It's going to be very much so a glaze like we did with the grass, but we're going to
use it on the deer, and I'm going to take my liner brush and just load up some paint
on that liner brush.
Okay, now I want to start the process of brightening the edge of this highlight on the
deer, but before I actually get to brightening the actual tip of that highlight, what I want
to do is colorize kind of the backside, so I'm going to take some of this orange, just
lightly, very lightly, right on the backside of that.
You can see that orange goes on pretty subtle, pretty thin, just gives it a little color.
We're just going to colorize the backside of that highlight.
Same thing with along here.
Add a little orange, maybe a little bit up on the forehead.
You can see we added too much there, but with oils and this medium, it's easy just to pick
that right off.
Get it back on your brush, keep going.
I want to get this on all areas of these highlights.
Okay, now you can see that's really starting to bring out the nice orange colors.
We can probably do the same with the antlers as well.
So we'll just go on the backside of those highlights on the antlers, just add a bit
of orange color anywhere where there's a highlight.
Maybe down low, see how that, right, kind of just blended into where those shadows start
to form.
This orange is just a good transition color between highlights, good transition color
between highlights and the darks.
Right on the backside, right where that goes from light to dark, very subtle.
We don't want this to be too overpowering, just want some color.
Perfect.
You can probably do that to the ear as well, right on that edge, right around the edge
of the nose, snout, just finish up on the neck, just saturate that a bit more.
Perfect.
Now you can see that color has really brought out that highlight.
Now let's get some white on our brush.
Okay, so this time we want to keep using our medium, but we don't want to use just, maybe
just not quite as much.
We want to have this white really stand out and overpower everything we apply it to.
So I'm going to make sure that's nice and opaque, mix in with our medium, got a good
mixture, and of course load up our liner brush.
All right, now I will start with the antlers up top and right on the outer edge, I'm going
to try and brighten those highlights.
You can see that going on, just makes that highlight pop a bit more, right along the
edge, as thin as I can get it.
Just want that to stand out a little bit more.
You can see how much brighter the highlights now look compared to this one.
So go over to this one, try not to cover up that orange, you want to leave some of that
orange of course, kind of get it right in between.
Perfect.
You can see how much brighter that's starting to look.
Now we can do the same with the edge of our ear, just make that stand out, make it look
like the sunlight is really illuminating it, a little bit on the snout, perfect.
I'll move further down the neck, just try to get the edge of that neck to stand out.
Wow, now you can see the difference between right here and what we started with before.
Just beautiful.
Look how much brighter that looks.
Now that we have the glow that we added out here, and the orange behind, suddenly our
highlight just becomes magnificent.
So I'm going to continue to do this with the rest of the deer.
Okay, now what I'm going to do is go back to what we started with, with the grass and
the orange, and just glazing on some more of this orange color.
We're basically going through the same process that we went through with the deer fur, and
very simply doing that with the grass.
So you can see that orange going on, that nice glow, and we can mix some up into the
highlights as well.
And then switching back to the liner brush with some white paint, I'm going to start
going through those highlights and just brightening some of the brightest brights.
You can see that little bit of extra white really makes a difference.
Just kind of random, very thin, we want it to look like grass.
That's pretty much it.
You can see how that is starting to illuminate the grass more, the grass is looking brighter,
everything begins to come alive, and you can see all of a sudden we've created this effect
that that light source, that sunlight, is really shining down on the deer and the foreground.
Well, I hope you enjoyed this quick tip and are able to take something away from it and
use it for your own painting.
It's really important to be creative, especially when painting in realism and using the different
mediums that we have to our advantage, mixing oils and putting them on top of our acrylic
painting can really make a big difference.
And such a subtle change is really starting to illuminate, bring life to our foreground.
I absolutely love where this is going.
I may add a few more details, but if you had any questions at all, please be sure to ask
in the comments below.
I will join the discussion.
Also, please check out my free print giveaway as well as my eBay auctions and website.
Both of those links are in the description below.
Thanks again so much for watching.
We'll see you on another episode of Paint Like a Pro.
