A beautiful crochet hat made from one skein. Honeycomb pattern. Crochet hat with a turn-up

DIY Crafts & Art
164 followers
A beautiful crochet hat made from one skein. Honeycomb pattern. Crochet hat with a turn-up.
#art #handicraft
Hello everyone, this is a crochet knitting channel, my name is Vasilya, in this
master class we will knit a beautiful hat with the pattern of the hundredth, and in the next master class we
will knit a snood for this hat, I also plan to knit a set of mittens for this set
with the same pattern, I will immediately say that one skein of yarn will be needed for the hat and one skein of yarn for the snood,
if you want to knit the same mittens, then it will be necessary to take, of course, three skeins of yarn,
I have Alize Lanagold Classic yarn, the color of the yarn is 166, 100 grams, 240 meters, 51 percent acrylic and
49 percent wool, I knitted the hat with a hook number 5, we also need a plastic needle with a
large eye so that we can collect the top of the hat, this hat is 55-57 in size, the depth of the hat
you can adjust the lapel, but if you want to make a smaller lapel or knit a
children's hat, then you can change this length of the lapel, this part from the top to the end of the
changeable one here we have 16 and a half centimeters and the lapel is 15 centimeters for this part I typed 30
air loops for the lapel 26 loops this part is just where 26 loops you can adjust
yourself, let's say dial less air loops for the lapel, dial 16, then, accordingly,
the depth of the hat and the rows will change, respectively, it will be necessary to knit less already
focusing on the circumference of the head, we collect a chain of air loops, we make a loop, we knit
and I do not tighten the first loop, I also count it, then I will have the first loop, then the second
third, and so on, we collect 56 air loops, so I typed 56 air loops, then we make
one loop for lifting, we knit into the second loop from the hook, here is the first one into the second, we introduce the hook and
knit a single crochet, then we have the first column, then the next one, we knit the second
column, the next third, and so on, I knit only 26 single crochets, so I knitted 26
columns and this loop, we will mark it with a marker when we knit the next row
from this loop, we will already have single crochets, then we knit 6 half-
crochet stitches, we make a crochet on the hook, we introduce the next loop and knit all three loops on the hook together again
crochet the next all three loops together and so we knit 6 half-
crochet stitches here we knit 6 half-crochet stitches the next 6 loops we
knit 6 connecting posts we introduce the hook we pull the loop and immediately we knit it through the loop
on the hook this is a connecting post such we also knit 6 knitted 6 connecting
posts further we knit 6 half-columns with a crochet the next 6 loops we knit 6
connecting posts pulled out through the loop and at the end we have 6 loops left 1 2 3 4 5 6
we do not knit them further at the end we make one air loop we turn over and knit the
second row in the second row we knit 6 connecting posts further 6 half-columns with a
crochet so we knit all the subsequent rows we will knit for the back wall of the floor of the loop here it is
the back wall here we have a pigtail for the back wall we will introduce the hook and knit
we knit from the second loop from the hook and knit 6 connecting posts try to
do not knit the connecting loops tightly, then we have 6 half-columns with a crochet also for the
back wall and we knit 6 half-columns with a crochet and again we repeat we knit 6
connecting and 6 half-columns with a crochet to the marker, this is how we already get this
we will have the wrong side, but this is our front side, then we tied it to the marker
here we already knit the single crochet stitches also for the back wall of the floor 5 we knit a
column and here we also immediately mark this loop with a marker and knit to the end
we get here 26 single crochet stitches at the end it remains to knit 2 loops here the loop and here
under the slope 1 loop is not we forget to knit it, this is my twenty-fifth
column and we do not knit the last loop for the back wall of the floor 5 and grab both
walls and also knit a column in order for us to have an even edge, then we will knit the
third row again we make one air loop we turn it over and also from the second loop from the hook
we knit 26 single crochet stitches where we have a marker we knit the last
single crochet we hang the marker on the next row here we will start single crochet
stitches we do this so that every time not to count here here are 26 columns further in the
third row we knitted 26 columns further we knit 6 connecting columns further we knit
6 half-columns with a crochet all three loops we knit together further we knit 6 connecting
columns and 6 half-columns with a crochet so I knit at the end 6 half-columns with a crochet
I have 5 I knit 6 and then we have to knit here 6 connecting
columns we must now connect it here we find you here here we have
such a jumper on the edge here it is on the side we introduce a hook here we find the next loop
here we have 1 2 3 4 5 6 air loops we introduce a loop pulled out a loop and this
loop we pull through 2 loops on the hook then we introduce the next one we knit it turns out
already the second connecting column 3 4 5 and the last 6 in this way we got
here a narrowing this we will have a crown further we knit the fourth row we also make one
air loop we turn it over now we also knit 6 connecting columns from the second loop from the hook
knitted 6 connecting columns further we knit 6 half-columns with a crochet if you look
from this side, here we have, as it were, a full petal here, it is clear that we have a petal
not a full one, we knit 6 half-columns with a crochet further 6 connecting columns again 6 half-columns
with a crochet and 6 connecting columns to the marker tied to the marker and here we
start to knit single crochet stitches, we have 26 of them to the end, we knit to the end and at the end
we do not forget the last loop, we grab both walls of the floor of the loop, we knit a column, so I
knitted the fourth row to the end, here we have such a main pattern, and here we
knit a gum, it will be a lapel of the hat, then at the end we always make one air
loop, starting from the fifth row, the rows are repeated, the fifth row is knitted in the same way as the first, that is, we
knit a gum here 26 single crochet further 6 half-columns with a crochet 6 connecting 6
half-columns 6 connecting columns and at the end 6 loops we have left again here we make
one air loop and repeat row 6 as 2 and so we knit a pattern I want to
show you again the place where we knit and go down here and connect 6 loops it turns out
we knit a row here we have a row of 6 half-columns with a crochet and here at the bottom there is such a
loop on the edge here we start a hook under it, then we find the next loop, look here we have
knitted it, here it is the next one, we start for the extreme bow of the pigtail, we pulled out the loop and knit
through 2 loops on the hook until the first connecting column, then we introduce the next one, we knit the
second 3 4 5 and when we knit 6, we also grab both walls of the floor 5
all we knitted 6 connecting columns again an air loop and went to knit as well as the fourth row we
knit, so I knitted here I have 72 rows, the very last row you should end as the fourth
row, look, we knit 4 rows, we have a pattern, here we have one hundred two rows and
here is the next one, two more, here is our pattern of 4 rows, it turns out that these two hundredths are
like this, I have a couple of 1 2 3 4 of them, I have only 18 rows, we finish as the fourth row
so that we have a pattern here, look at the hundreds, they go exactly now we
will connect here and I recommend to sew it somewhere to the middle of the hat and turn it out, it turns out
that we have a gate to turn it out and try it on so that you can already understand whether such a size is suitable for you or not,
and then you sew it further and tighten the top of the head, now we will sew it here we have this
front side, but the wrong side, look here we have such grooves, we will sew the hat
on the wrong side, so we turn it over, find the last loop here and pull out the tip of the
thread, now we look on this side, we introduce the hook into each loop here, look
at each loop, here we have such jumpers, here we will introduce the hook into each loop, and on this
side, here we have braids here, we will grab only the back wall of the half-loop,
we introduce a loop from this side, then grab the back wall of the loop, pull it out and
knit a connecting loop, then we introduce the back wall into the next one and through the loop on the
handle, try not to tighten it too much so as not to pull off the seam, so I sewed half of it, do not forget to
try it on from this side, if we have such a turn here, this seam is not so
noticeable, as it were, there are the same grooves, but on this side everything is turned out on the front
here the seam will not be visible at all, and then we sew it to the top, then I will already show
how to pull it off, we also sew it on the wrong side, we continue at the end we leave the tip of the
seam, here is our loop, we put the tip here and tighten it, now we thread the thread into the needle
and here in a circle we collect the loops, we grab the loops and so we go around the whole circle
we collect all the loops and now we tighten the hat, do not pull it too much, tighten it carefully,
then, as they pulled it off, then in several places it is necessary to sew it again, we got
such a neat beautiful top and we also do not see the seam here, everything is
even, here is our hat, I hope everything was clear to you, there are some questions, please
write in the comments, do not forget to subscribe to my channel and knit with me
