The New 9760STS Is a Beast! John Deere Soybean Harvest 2025

Organic Farming
18 followers
14 Video Views·Nov 29, 2025
9400 grew a little bit guys.
Giving some steroids. I probably didn't need to.
Oh 9400's getting tired. It needs to go to somebody that ain't uh that ain't running
double-cropped soybeans. We're like about 150 acres and we got Big Joe or Big John with
Big John support. We'll call this one Hoss. We've got Hoss with us.
We got started. It's about almost two o'clock right now.
Yesterday we spent all day working on the draper.
Throwing over it. Had several things to do to it. But it'll all be good now. But we got it
hooked to Hoss. We're down here in this 18 acre creek bottom. Hopefully gonna finish up beans
this week. Hopefully. Fingers crossed. But it is a Hoss. They don't know that 25 foot's on there.
Running about four or four and a half mile an hour. Probably could run faster but
the header won't cut the beans. The header is the limiting factor now.
And it's still a little wet and it's wanting to still a little damp still wanting to push.
I don't know if we have gone into details about this combine.
We went up to Streeter, Illinois and we found this combine. It is a 2006 John Deere 9760
with a bullet rotor. Got about I don't know how many engine hours.
Not many. Not many over 3,000. But I know it's got about 2,100 separator hours. So we're about
cutting half of what the 9400 has. But we're doubling in capacity because I think this has
got the 9.1 liter in it engine. I know it's a 9 liter. Nine point something. 300 and something
horsepower with the power boost. But like I said it's cutting these beans. Granted they're not the
best beans. But four to four and a half miles an hour. And like I said the header is the limiting
factor now. Where if you go too fast it just won't cut them good. I'll give you some more history on
was sold at PSR and Streeter which is where the 9400 come from. But now it is Heritage Tractor.
But it's the same dealership. We actually met the salesman at the same dealership that we bought the
9400 at nine years ago. Almost nine years to the day. But it's a 2006 9760. The only thing this
combine has done for the past 10 years is cut soybeans. We actually went out to the man's
farm to look at it. But he was running it in a S680. Well him and his brother they traded the 680
in for a 780 and was going to keep the 9760. But the brother they had a change of mind or something.
So they traded the 9760 back for the S680. So it must have been a good machine if they was
going to keep it you know over the 680. But they traded back for the 680. So now they have a 780
and a 680. But they did cut beans with it. They was running three combines cutting beans. So it did
cut beans. When we when we went and looked at it it was still covered in bean dust. Like I said we
went out to the man's farm to look at it. And rows and rows of Morton buildings. Nothing set
outside. Everything was under a shed. But we went and looked at it. Drove up on a Sunday night.
Bought it Monday morning. They delivered it. That header ain't cutting worth a damn. I don't know
what's going on with that header. But it's riding beans over. I don't know why it's doing that.
The thing nowadays, cutting beans this time of year, if you tilt it too far forward
it wants to push. But if you rock it back it wants to ride them over.
So we'll come back out here and clean it up I guess. But that's the history on the combine.
There was lots of buyer's remorse after we bought it. Because we really did not need to spend the
money on the combine having another payment. But the way I look at it, you can either keep
throwing money out of combine that ain't gonna bring.
You know it's gonna be worth the same money no matter what. How many new dollar parts you put in
it. Or I guess you could spend that money and run a bigger newer machine. But as y'all know the farm
economy ain't the best right now. And there will be some changes on our farms in 26, if there is a
26. But I think after a few minutes in the seat seeing what this machine will do, I don't think
back to an auger head. But you know Tennessee Tractor quoted us some prices on some McDonalds
and some John Deere drapers. But they was wanting more for the headers than the combine.
Than what we pay for the combine. But you can find them auger headers
fairly reasonable. I wanted to get a 635F but we think a 630F would be a better fit for it.
It'll run a 35 foot but a 30 with our fields 30 would suit better.
You can still have horsepower to spare with a 30 foot. 35 foot you might be stretching it there.
He was running a 35 foot on it but a 30 would be better suited for what we want.
Whether that happens or not, I don't know. We're just going to have to run with the honeybee for
a little while. Tell you what I mean as long as the drag and push. We're about done here. We got
to move. Got to get on the road cut up by central control. Drive all the way down to four lane to
get six acres which is right over there on the other side of them trees. There's a creek that
runs right through them trees there and we got six more acres on the other side. But we got to go
all the way around to get to it which ain't no big deal at all. Ain't nothing but a thing.
But he's about to winder up. We'll catch you later on. We'll catch you when we're something
