Inside Elon Musk’s SpaceX Factory: How the World’s Most Powerful Mars Rocket Are Built from Start to

Metal Processing Technology Topic
7 followers
The journey begins with raw steel and ends with the full-assembled Mars rocket, ready to transport us to the stars.
The full process, from design and fabrication to engine testing and final launch, is executed right here.
Engine Bay 4 personnel, prepare for heavy lift sequence on the main stage assembly.
We need to verify the alignment on Section 9.
I double-check the specs. It looks like the forward bulkhead is slightly off.
If we reroute the main conveyor here, we increase throughput by 20%.
But that interferes with the crane path.
Roger that. Crane 1, continue traverse to the east. Keep the pace steady, team. Watch your feet.
The ascent vehicle mass estimate is still too high for the projected delta-v.
If we optimize the cryogenic fuel system integration, we can shave off another 3%.
If we adjust the fuel mixture here, the thrust increases by 5%.
That aligns with the simulation data we pulled this morning.
All right, let's see the new line.
The forklift delivery seems backed up over there by Station 4.
Control, this is Engineering.
Thrust curves holding steady at T-60 seconds. All parameters green.
Look at that spike! It worked!
We finally did it! Incredible data!
Great work, everyone.
The thrust vectoring passed the final check.
Yes, the pylon mounts are secured.
I need this one moved to Bay 12 by you.
Adjusting elevation by 0.05.
Solid green. We have alignment.
Hold left, hold left. Bring it down 50 millimeters.
Down 50 millimeters. Checking alignment now.
Confirm coordinates locked. Sector Alpha-Niner. Maintain pressure at 20 psi.
The alignment here seems off by a few millimeters. We need to adjust before the next weld.
All right, let's bring the crane back around slowly.
Pay close attention to the fueling lines indicated by the red marker.
We need to ensure all protocols are followed during the integration phase here.
Keep it steady. Watch the guidance system on the left.
Control, rotation sequence is proceeding nominally.
We are approaching vertical. Lock sequence initiated.
We show valve cycling complete on the LOX fill line.
Copy that. Pressures are stable.
All systems are reporting green. Flight.
Roger that. We are currently T-60 seconds and counting.
Copy. Pressure is stable.
All systems nominal. Flight director, we are green on internal power.
Copy. Pressurized to flight level.
Attention on the pad. The area is now designated red.
All non-essential personnel clear the perimeter.
T-10 seconds.
T-8, 7, 6, 5, 4, 3, 2, 1, 0.
Telemetry is nominal. Trajectory stable.
Copy that. Confirmed green on my board.
Firing sequence confirmed.
Staging complete. Separation confirmed.
Telemetry looks good. Proceeding to orbit.
All right, let's review the schematics for section 4.
We need to ensure the alignment is perfect.
Got it. I'll double check the diagnostics on the power couplings right now.
Lend.
The delta-V near the second burn seems high.
We should recalculate the atmospheric entry angle.
Agreed. If we adjust the phasing...
We need to target this crater for the initial descent.
Roger that.
Bringing the lander down right here.
We are still seeing an unacceptable delta-V variance on the third burn.
I show the trajectory correcting here.
T-8 seconds.
T-5 seconds.
Stage 1 initiated. Lift off.
Simulation complete.
This area here, designated as the oxia planum,
offers the best balance of hydrated minerals and a safe landing trajectory.
If we optimize the gimbal angles here, we should see better stabilization.
But what about the thrust efficiency at max Q?
It's designed to be fully reusable, just like the rockets we see today.
Check the telemetry on chamber 3.
Levels look stable, but the humidity sensor is spiking again.
Attention all teams. Final assembly on Project Orion is commencing.
Ensure all pathways are clear.
The fuselage is on schedule, but the harness needs adjustment.
Agreed. But look at the integration on the finished model.
We applied those lessons well.
