How to make a Star Garland for Christmas!

Skillful Hands - Excitement Every Day
20 followers
3 Video Views·Nov 28, 2025
Comments are disabled for this video.
Hi, I'm Mark and welcome to the channel and today I'm going to show you how to make this
incredible star garland. I freaking love it. I think it's so cool. Yeah, so let's just get right
into it. I'm going to start out by showing you all the supplies you'll need for the project.
I got this at Michael's. It's called Wired Hemp and it's just a thicker
gauge wire that is then wrapped in hemp and I got these paper covered floral wires that are
much thinner and that's going to be to attach the stars to and then these will wrap around
the thicker wire and that's how you'll attach them. You're going to have cardstock. You're
going to get cardstock in whatever you want. I chose to do sparkly because I wanted them to be
glittery stars. You'll have to use cardstock. You can't use plain scrapbook paper for the way I'm
going to show you to make these. You need something a little stronger. This is going
to come in really handy for you just cutting things out and measuring things. So any kind
of invisible ruler or if you don't have one like this, you know, you can use just a regular ruler
as well. You'll need your star templates, utility knife, you'll need a pencil.
I wanted my stars to have different sizes of glitter and like chunky glitter, fine glitter,
so I got two other canisters of just different types of glitter that I'm going to glue on
after I make them just using tacky glue, just a craft glue. You could use Elmer's,
whatever you have on hand. Oh, and some wire snips if you have them are a lot easier to cut
wire with than craft scissors. So if you don't have these, investing in a pair is going to be
really handy for all your crafts. So I'm going to show you how to make a star template. I'm going
to start with a square, however big you want it, and then you're going to fold it. Start with this
like a sailboat. You're going to take this point and bring it up to the center.
You're going to crease this at a sharp point there. Then you open that back up.
Then you take this long side and bring it towards, if you can see, I'll draw it so you can see it
here too. This will maybe make it easier. So that crease line that you just made folding this up
here, right, I just drew it in there. You're going to take this long edge, fold this into that, and
you want to keep it straight along that fold. Then you're just going to press there because
you're just marking this. You don't have to fold this all the way down. You just need to know where
this little line is. You're going to take this point again, keeping your point sharp at the
bottom here. Only this time you're bringing it up to that line that you just creased instead of all
the way up here. Then you crease this. Then you take this long side again and you're going to
bring this, you're going to keep this point sharp, and you're going to bring this edge up to meet this edge
just like that. So then you have this shape. It's that line and we want to fold this
over, keep that pointed, keep this all even, and crease that.
Then I flip it over because you need, see this point here where that all everything kind of
intersects? This is where you're going to draw your line here. You don't have to draw it, you can just
cut it. If you want a chunky star, you're going to have your line up here
and have it be less of an extreme angle and that'll give you more of a puffy,
you know, like chubby star. If you want it to be, you know, have more slender points,
you're going to come further down, right? So I'm just going to draw this. You don't have to draw
these lines. This is just so you can see it. So see that that point there and then this line,
this is what I'm going to cut on. Put your utility knife down and slice that away and open it up
and there is your star. So after you have decided on what size stars you want, I decided to do three
different sizes, small, medium, and large, to give some variety and texture and shape to the garland.
So what you're going to want to do is trace all your different size stars and you're going to
need a front and back for each one and I started off with doing 30 stars, which I thought would be
pretty good. It would allow me 10 stars for every foot of the three-foot garland that I'm making
and we'll see if that's what I end up using. I'll let you know at the end exactly how many stars I
used and then as I went through, I did number them, you know, 1, 1, 2, 2, 3, 3, so that I knew how many
I had going because, again, you need two for each one. After you have traced all your stars out
and given, numbered them accordingly, I found the easiest way to get them to have a symmetric, well,
so they're not going to be symmetrical if you cut them by hand, no matter how accurate your
measurement was because you're going to cut the template out and then you're going to trace that
and then you're going to cut that out, so there's three chances there for it to get skewed. So the
best trick that I found so that you can keep a front and a back that they'll fit together the
best is to cut out one side of your star, then take that, flip it right side up over your other
piece that you have traced, over your other like half that you've traced, and use that as your
template. That is my little helpful hint for you to get a nice front and back that match up.
That's going to be the best way to do that, and then what I do to make sure you line them
up correctly at the end is I draw a little arrow and that will denote what, oh, see, I already
spun it, yeah, that will let you know which side goes up, right, so you can keep it straight
after you go through the next step, drawing your fold lines on, folding it, you'll know that that
is the top and that is the top. So that's my hint to you. Okay, now for the next step, I find it
easier to draw these lines instead of just trying to eyeball it. So what you're doing is going from
point to inner point, you see that, point to point, you can do that all the way around, and
and then you fold along these lines, and I find it easy to fold them all in the same direction
at first and then some of them you'll bend the opposite way. So you bent all of the lines
to the inside first, right, then on every point of the star you're going to bend on that same line,
but you're going to crease it to the outside because you want that peak, you know, you want
this to pop up and this part to go down. You see how that gives it that dimension,
and that's how you do it. So you're going to do that a lot, but honestly it's kind of fun,
and if you have a friend doing this with you that's even more fun, or put on a Christmas movie,
or your favorite Christmas album, or if my mom is doing this project with me because we've made
these before in past years, we just kind of sit there and maybe we put something on in the
background, and we talk about stuff, and talk about our plans for Christmas, all that stuff. So
it's just really fun. It's all about what's, you know, surrounding the activity too, not just the
activity itself, I think, that really makes it fun and makes you remember it. So the next step
is going to be to bend the wire to attach to the star. I just made this sort of little thing because
it's going to glue in there, and then you're going to be able to put the other one on right,
and that's going to work out really well. So what I'm doing to attach them,
taking my floral wire, taking my wire clippers, my pliers, bending a
circle in it, just wrapping it around, doing a circle, and then I'm bending this up
and around to make kind of a little shepherd's crook or, you know, little bend in it.
That's just going to, this part is going to allow me to glue it right here, and then that just gives
me the right sort of stem to glue it onto. Glue the wire on the inside, a little hot glue,
stick it in the middle. What I'm going to do is put a little dab there as well to keep it from
shifting around. Okay, and now I think the easiest way to glue these together is to run a bead
of hot glue along all the edges, and then you sort of match them up kind of flat,
and then puff them out again. So I'm kind of pressing them together
flat, and then I can sort of pop it open again. Okay, now that, and I go back and peel off the
excess glue. Now, like I said, sometimes they don't match up perfectly, right? So you're going
to have some edges that maybe, let me see if I can find a better one to show you here. Like on
this one, how the edges don't quite match up. So there's three things you can do. You could do a
tinsel pipe cleaner and glue those around. That would make it, give it a very vintage look. You
can take your scissors and come in and trim, or what I'm going to do is do glue and then add some
glitter to cover up those edges. Yeah, and you can see like this side too, that one looks great.
So your fourth option is to put that side facing the back. I'm going to do the glitter because I
want the extra texture and different look of the different glitters. So you can see I did gold
and silver, but let me show you how I'm going to do the glitter to keep it as mess-free as glitter
can be. All right, I get two paper plates and I kind of do like the breadcrumb method, I call it.
If you've ever, you know, breaded chicken or zucchini, we always do fried zucchini in the summer
since I've been a kid. You know what that means, right? You got to use your glue or that would be
in the case of a fried chicken or fried zucchini, that would be your milk and egg wash, right?
So I'm going to do that on a plate. I'm going to keep one plate that is just glue
and then we're going to do...
Should I have gotten three plates or did I get three? I did get three plates.
And then I'm going to have a plate for my gold glitter
and my silver glitter, which is more of this large holographic kind of glitter.
And I thought the light would bounce off that in a really, really fun way. Oh, that's pretty.
Oh my. Okay. And then I have my paintbrush that is specifically for glue. And I like to do it this
way so I can control it a little bit better. And you just paint on the edges that you want to do
the glitter. Pretty self-explanatory, but just in case somebody doesn't know how to do this,
because if you've never been taught, you wouldn't know. Then I come in here.
You can use your fingers since you're using the brush to put the glue on and just sprinkle that on.
So there it is with all of the edges done. It's subtle, but I think it's a really cool difference.
And here is the silver glitter. And you can see how the light really just bounces off of that.
So I do recommend using at least one holographic glitter or cardstock in your garland because
it really bounces the light in a great way, especially when those little Christmas lights
hit it. So, all right, I'm going to finish up the other stars that I'm going to do this to,
and then I'll be right back. Okay. Now we have all of our stars, which admittedly look
beautiful just in a pile on your table, I have to say. I love it. And then I took my hemp wrapped
wire from Michael's and I cut a length of it. And then I wrapped, I made a little loop at each end
because that is where, you know, you can kind of put a fake Christmas tree branch through that.
Or if you're going to hang it, you know, on a mantle or something, you can put that on the
hook or nail or whatever you're going to hang it on. And how I'm going to do this,
I want it to look like, you know, a swooping cascade of stars, almost like, you know,
kind of the fairy godmother waved her magic wand around the tree and like all these stars are kind
of dusted around it. So I'm going to start just wrapping these around the wire and just taking
my floral wire, wrapping it around. I cut off the excess.
Let's do these small ones. And I just kind of want to layer them, you know, and get like a nice
grouping going. So, okay, and then I think we need a big one to kind of
be behind them a little bit like that. See? Right. And obviously they're wire, you can bend these
into whatever kind of shape and position you want after the fact. But I just want to
get it going here. So you're just going to keep building it. And you want to think,
if you're using different colors, you want to think about where you want to pop that
other color in. You know, I try, I'm going to try not to have all, you know, several of the stars of
the same size together right next to each other. You know, you want a variety of sizes and shapes
and finishes if you use the different styles of glitter and whatnot.
I'm just going to keep adding our stars. And you're just taking that floral wire and wrapping
it around your thicker wire. And then that is thickening the wire up to make it pretty sturdy,
you know, but still very bendable for your, for all your decorating needs.
And here is the finished garland. I can barely fit it in the frame, but you can see it here.
And it is about 46 inches long from one loop to the next. But you can see the stars pretty
much go to the ends of the loops too. So, and I used 34 stars total for a garland that is almost
four feet long. So not quite 10 stars per foot. But that's kind of a good rule to go by because
if you do more smaller stars, the larger stars, you might need a few more. And if you do more
larger stars and smaller stars, you might need a few less. So I think that's a pretty good
number to shoot for when you make this. And if you need to make a couple extras
as you're going along, that's no problem. And here's what the star garland looks like when you
actually put it on a tree. I made another star for the top. And you can see I put the tinsel
around that one for the tinsel pipe cleaner.
So be sure to like, comment, and subscribe
so you can follow along for all of the Christmas crafts I'm going to be doing
this holiday season. And until the next one, happy making!
