Can I Get This Motorcycle Found in a Scrap Pile Running?

Two-Wheeler Technology
5 followers
4 Video Views·Nov 24, 2025
Can I Get This Motorcycle Found in a Scrap Pile Running?
This might look like a bunch of scrap and it is, except for one. Check this thing out.
My boys and I like to do scrap metal. Well, they like to do it more than I like to do it,
but since they like to do it, here we are. And it gives them a little extra money to
buy RC car parts or dirt bike parts or anything like that. It's a good experience for the boys,
you know? Anyway, so we were loading up scrap metal from my buddy's shop who does a lot of
parting out on eBay and he had this bike sitting in the shop. I'm not even 100% sure what this
bike is. I know it's a Kawasaki. To me, it looks like a KE, like it would be a KE, KE100 or
something, but I don't know. And I'll be honest, I didn't even look. All right, let's get this
thing unloaded. Move? Yeah, kind of. How cool is this old thing? Tires are flat. This is a 19,
I have no idea what. Kawasaki, I have no idea what. But we're going to figure it out together.
That's made out of like aluminum foil. Holy mackerel. Yeah, pretty neat little... Oh,
it is a 100. Look at that right there on the old tank. I don't know. My guess is it's a KE,
but man, look at this thing. This is super cool. We're going to wait to look at the tank and see
if the engine's free and all that stuff as soon as we pull it in the shop. But first,
while we have it outside, and let's just take a minute to pause. Look at this beautiful
Pennsylvania weather we're having. It's a nice breeze. Yeah, it's pretty nice out here. So okay,
we're going to hit this with a squirk on a little soap before we pull it into the shop
and check it out. And it was soap. Oh, let's stand upwind, Dan. Get upwind. This is a non-toxic
soap that we're working on. It's coming out very well, but I do not suggest drinking it, Dan.
Do you recommend getting it in your eyes? No. Okay, well, that's only one thing I recommend
getting in your eyes. Tears and contacts. What I like about it is you just let it sit on for a few
minutes and it'll just start, especially with like mud and dirt and stuff, it just starts eating it
away. We're still experimenting a little bit, but I'm going to nail the formula and then you guys
will be able to have a really good bike wash. I smell the mice. You catch that? No. I just
caught a whiff of mouse. Like mouse pee or whole mouse? Like mouse pee. All right.
Does anybody else notice that yet? If you know what that is,
leave a comment down below. We'll talk about it here in a few minutes, but that's really cool.
Well, what do you think? It's a lot cleaner than it was. I'm not totally afraid to touch it now,
huh? Fall in Pennsylvania, 75 degrees and sunny. One minute, chance of snow flurries the next.
Love it. Oh, I thought a raindrop. Go pick your pumpkins. Oh, today's a special day because with
us in the shop, we have a big fan. Nice. All right, now that we have it cleaned up and stuff,
let's take a look. Start at the back and we'll move our way to the front. Check out what we
have. Trying to figure out exactly what it is. I like that. So let's start back here. Of course,
we have drum brake. We have twin shock. We have an 18 inch golden boy. Knobby. That's shot. You
can about see right through it. Really nice chrome rear fender. It's not all banged up, dented,
twisted, cracked. That's really nice. It would have been a street legal bike at one time,
I'm guessing, because there's provisions here to mount a taillight. I would imagine turn signals,
maybe here or here. One of those two spots, maybe, or maybe there was a rack and then a turn signal
and rack could mount there. Of course, we have the spoke wheel. Passenger peg would have went here
and we have the mount for a brake switch, but we don't have the brake light. Our seat. Yeah,
that's a shame. Yeah, see. But we have an oil tank and that's nice and that's intact. Oh,
we've got a brake. Look at that. Seems like that's working. Yeah, it's not all locked up and
everything. We have, um, this is what they call a rotary valve side mount carburetor. So the
carburetor is actually in underneath this and we've showed them to you before, but then there's a disc
in behind there that's spinning with the crank shaft has a hole in it. And then that's, what's
allowing the air fuel mixture into the crank case up through the ports to fire the cylinder petcock
clean that cleaned up nicely. Oh, and it moves so far. So good. Their kicker moves.
Now the big question is the motor free. What do you think Dan? No time like the present. Hey.
Oh, Oh yeah. Even sounds like it's got some, some compression in there. Huh? That's cool.
Throttle throttle is kind of moves. What do we got there? A kill switch. This is our choke. These
are really, really hard to find intact. This is generally broken off like this. See that one's
broken off and then it was just filed to be smooth. So that's, that's really cool. I'm not
sure why our clutch lever's down underneath like it is, but clutch feels like it's doing clutch
stuff. Front brake is doesn't have much travel there. It doesn't seem like it's locked up any
size rubber. We run on a three by 18. So we got 18, 18. So shame of this front fenders
cracked here, but this is made out of like aluminum foil, man. That thing is twisty and bendy.
And again, going along with the street legal theme, we have provisions here that would have
been to Mount the gauges, probably headlight Mount fork seals are leaking. Once you know it,
we've got a bunch of wires just hanging here. We'll have to go through and figure some of that
out. Let's look in the tank because we know we have motor spins over. We know we have a bunch
of wires disconnected. We know our throttle slide is sticky. What do we got for tank? No whammies,
no whammies, no whammies. Ooh, so far, maybe so good. Oh wow. It's not rusty. It's a little
rusty. That's a fluid. So that should clean out. That could be some water that blown in there from
the pressure washing. Very, very little rust. That tank is super respectable. I love it.
We got some issues, some dings and dents here, which is a shame, but overall,
matter of fact, very nice. What do we have over here? Let's investigate. It only holds a hundred
CCS of oil. That's not much. You guys left your comments in the comment section of why,
but this is my has a heart. Okay, here we go. This is actually, this would be a hooker header,
hooker headers. Excuse me, a what? A hooker header. Yeah. They made headers for dirt bikes
and race cars and all sorts of stuff. Super, super cool. When I saw that, I was like,
no way. And this head pipe exhaust system, I bet you this is worth three times what the bike value
is. And that's my guess. And then to have a complete choke lever as well. I mean, that's,
that's pretty saucy. Let's be honest. Now look, look what I just found in here. It's not connected
to anything, but why is there a toggle switch in there? What would that be for? Was that like a,
Oh, you know what? I'm wondering if that was like a secret switch where if you didn't know it was in
there and you just turned the bike on and went to start it at one start, you'd have to know that
switch was there, flip that switch. And then you got sparked. Interesting. Okay. So I still don't
quite have a year and I'm still not a hundred percent sure of the model. So here's the plan.
I'm going to sit down. I'm going to hit the Google for about 45 seconds, maybe 80 seconds. Dan's
going to order us some food. We're going to eat and then see if we can get this bike fired up and
know what it is. Sounds like a stand plan. Sounds like a plan, Stan, Dan, planning, Danning.
Okay. My belly's full. My belly's full, Dan. I had a bowl of chili. Very good. Did a little
research here on this thing. And I think I know enough about it that we can justify getting it
up here on the table. I'm not sure exactly if this is a 72 or a 73, but I'm sure you guys in the
comments section will fill us in judging off the color of the tank, the striping of the tank and
Dan, this number right here. So show them that number while I get this thing strapped to the
table. But I think this is a 72 or 73, maybe that's G4, G4. So this is Kawasaki G4 100. Now
they had this in, I think, two different versions. It would have been a, this version. And then I
think they had a version called the trail boss. I don't believe this is a trail boss because it
would have a G4TR in the number, but it's a G4 100. And this is really cool. It actually has
a five speed dual ratio transmission. So check this out. That's what this is. This here's the
two speed. So we're going to have five gears and then two ranges. And from what they say on the
internet, low range is super low on this thing. So that's kind of cool. I don't know if we're
going to get to figure it out because, you know, first we got to get it to run and then we got to
get it to move. But this is really neat. So if you look here and I missed this the first time,
there's a cable adjustment here. So this would have had a cable that ran from here and up through
all the way. And it would have come out over here on your right side. And it would have had a lever
that looked just like this. And that would have selected your high, low range, which is pretty
cool. Now you couldn't do that while you were moving. You had to be stopped, but still that
was pretty neat technology. Now let's see if we can open up this seat. Look at that. So that would
have been the envelope where you kept your registration tag. That's pretty neat. So here's
a better look at that kill switch I was talking about. I wonder if that just wasn't his hide a key.
Speaking of which, what is this? Is that the toolbox? Couldn't have put it at a better spot.
Got filled with water. Hello, hello, hello in there. I see a broken piece of
aluminum. So nothing fancy in the toolbox. Darn it. But anyway, this does turn over and that is,
listen to that. Amazing. Let me grab a couple of tools. We'll pop that. We'll pop that. We're
going to get the air cleaner off. Make sure we don't have any mouse nests in there. Once we start
hitting on this thing, it'd suck them into the intake. It'd be a mess. We'll pull a spark plug.
See if we have spark. Oh, spark plug cap came on done. So when I pulled that off,
the guts of the spark plug cap unscrewed. So that actually screws into your spark plug cap. And then
see this little wire retaining ring on the outside. So that comes through here to the inside.
See on the bottom, see that wire pokes through. And then that's what grips the threads here on
the spark plug. And they run these caps on like two strokes and dirt bikes and things where you
get a lot of higher vibrations. I want to get my air gun quick, and I'm going to blow out on top
of the cylinder here before I pull a spark plug. That way I don't have debris or debris, debris,
debris, or debris falling into my cylinder. Coming at you. It's been a hot minute. Put a
little ring lubricant down in there. Yeah, we'll let that shoot its way through there.
Let's get to work. Pop that off.
It's a shame we got that. Can't all be perfect, right?
Quick change air filter. Uh-oh, I see a bunch of seeds.
Here a bunch too. Yeah. Still coming out. Boy. All right, let's do this over the trash can.
That's nasty.
I'm going to go wash my hands. Well, now I'm kind of curious what it looks like in here,
the carburetor situation. So let's do that quick.
Don't let it bite you. I was hanging on a little tighter than I thought.
Okay. Oh, that's good. Oh boy. That's where all the oil from the oil tank went. No need to panic,
Dan. No need to panic, Dan. Help, I'm panicking. Can't stop. Quite a bit of oil in there.
Why do the mice always pee in the carburetor, Dan? Yeah, that cable is not pulling. If you
were a mouse, where else would you be? Yeah, I guess, right? Man, that slide's pretty stuck.
Okay, we're going to work at this. This is going to have to be done in some stages here.
These side valves, these rotary valves have a little access port here, and that lets you get
in. And a lot of times it's just a straight blade screwdriver there that's holding that clamp,
so you can pull this off. How cool is it that we just get to discover old motorcycles like this?
And when I say discover, I mean like, you know, I'll be honest, I didn't know they had a two range
transmission on a bike like this in Kawasaki. I think that's pretty neat. Okay, so now that's
loose. Right, right, right, right, right. Now our carburetor is going to come out, right?
Just like that. Everything's good and stiff. Yeah, that's tight.
There we go. Yeah, that slide is stuck. Okay, so I wanted to open that up so I could start soaking
this in penetrant, and hopefully we can get this slide to move easily with just a little patience
before we go ramming screwdrivers in here. Nope, nope, we just need to have some patience.
I'll let that do its stuff. We have some work to do over here on this side of the bike.
All right, how you guys doing? Welcome to this side of the bike. So all of our electrical
doodads are coming from over here. We're just going to start opening up a couple things.
Well, been down this road before. You know, if you're too rough with these things while you're
putting them into the machine here, they'll break. You don't want to look at them wrong or
set them down, they'll break. Moved, didn't it? Necessary destruction is what I call that.
Let's see what we got in here, huh? You're gonna find out that's something you didn't
want to open. Yeah, watch. It's just gonna be a bunch of oil dumps. Yeah.
Well, this here would be the flywheel right here.
That would be the end of the crankshaft. That would be the crankshaft nut.
Now, you see these coils in here. We would have a lighting coil. Let's see, there's a point.
We come around, another coil. And there we have our capacitor for our point. And then there we
have another coil. So we got what? One, two, three coils. So we have two yellows. Those are going to
be for two of the coils. Okay, so that switch, I'm guessing this wire is going to plug into this
connector here because this is actually a two connector. So it's sending the pulse up through.
If you flip the kill, it's easiest way to ground is going to be directly through this wire and it
won't hit the coil. So that's what kills the spark. All right, let's grab a spark plug. Just
see what happens. Maybe if we just plug in a couple of the right wires, we'll get lucky.
But that's okay. That's not a surprise. Oh, well, there's our problem. We're part of it anyway.
These things are super dirty. Well, hey, let's just clean that off a bit and see what happens.
That's some carb cleaner. Got some electrical cleaner. I got my points file and I got some
emery cloth. These points are a little, I don't know, they look a little gooey. Why would there
be goo? Good question. Let's see what we got. That's a real bear to get to there, if I'm being
honest. This point hinge is a little sticky, so it's not allowing the point to move freely,
open and close freely. So I want to see if I can get that. I guess we should drain this oil
because I had no idea if this thing was sitting inside, outside, in between sides. Still can't
believe they put the drain bolt right above the foot peg bracket. Oh, tell me, I was going to say.
I was like, tell me I'm going to get to the last thread and it's not going to pop out of there.
Okay, so I do believe we're going to have to just pull. Let's just pull this cover.
We're going to end up pulling the flywheel anyway so that we can clean the points.
Remember that little trick I taught you last video? Start top left,
mark your way around on your cover bolts, keep them in order that way. I put that one upside
down because it's different. It was there in the middle, but I'm going to say that somebody was
probably in here at some point because we're missing one here. So yeah, there's only four
of them here holding this thing together. This one here is stripped out. This one here is stripped
out. Oh, I'm starting to see some water come out. It means I'm getting somewhere, getting some
movement. Balls in there. Oh, we got those balls? Got those balls in there. That's no good.
Probably don't want to lose them. One ball, two ball, three ball, four ball. All balls. All balls.
Geez, then we got another set of balls? Do we have another set of balls? Oh my gosh,
then we got four more balls. You know what would make me happy? Another couple of balls
and an extra set of fingers. All right, ball one, ball two, ball three, ball four. Now,
just like that. What in the is that? Is that an alien?
Yo, did we just find an alien? Is that a caterpillar with a boner? What is that?
What the heck? Yo, whatever it is, man, it hatched and it is here to eat you.
That's revolting. All right, well, man, there's a lot going on in here.
So let's pull this flywheel off. Let's see what we got guts to cooking in there.
Okay, now we pull our washers. This is our crankshaft here, so you do want to be careful
and you don't go boogering up any of the crankshaft threads or the end of the
shaft there as we pull this flywheel. Just like that. All right, now we can kind of see what's
going on. Clean that flywheel up a bit. Clean up these magnets so that we get some good current
conductivity. Crankshaft's looking good. All right, let's see how these points are moving.
Pretty sticky. We need our points to close. If our points aren't opening and closing,
then they're not doing point stuff. And if they're not doing point stuff,
then good, then that's no good. So.
I'd like to see those points a little cleaner, but there's not a whole lot of
room to get some cloth in there. Let's see if we can get this thing back on.
You gotta watch your fingers here when you do this. There's some pretty strong magnets pulling
it in. There we go. Now we're just going to leave that off or leave that loose. Give this thing some
kick. See if any of that helped. What are the chances? That fast? Really? Or not. I guess it
took a while. Just had to clean some points. That fast? That's all we did, right? Just like that.
Ready? Dude. Yeah. That is sick. Dude, that's really cool. Now here, watch this. I'll show
you. See if I can show you anyway. If we do this. This is just rudimentary. Rudimentary,
my dear Watson. But I'm going to stick that in the other side of here. Something like that. Now
flip this switch here. We have spark because we're in run. Flip it off. We lose spark. Lose spark.
We got spark back. So all we have to do is throw a connector on this side of the wire.
That gets plugged into this connector here. And then we have a working kill switch. Hot diggity
darn. That's really cool. We're halfway done. Now we just need to get this carburetor apart.
Get this slide out of there so we can get all this apart and get this to soak. Man,
that slide is really tight. Dan, we might need to figure out a way to get creative. I think maybe
it would definitely not hurt if this thing got put in the buzz box and we got like the heat
and the and all that stuff going on. It's not coming out. It's not coming out. So we should
bring the buzz box to it. That's what I'm wondering. That's what I'm wondering.
All right, we got the buzz box set up. Got hot water in there. Some of our secret sauce.
Let's turn it on. Watch. Watch how this will react.
See, it's starting to pull stuff off. Just let it do this thing for a little while.
That slide will come out, which will be fantastical. I think we just got to let
this thing run for a bit and see if we can get that carburetor apart. Let's do it. Do it.
All right, Daniel, it's on. Last night, my plan worked. I got this thing to move. This did move.
Maybe I got to heat it up again. Oh, shoot. So it's still stuck. Maybe I should have only moves
when it's hot. Oh, dang it. I was all confident. Oh, my gosh. It is moving, but it's I should have
just yanked it out last night is what I should have done. But I wanted to bring you guys along
with for the satisfaction. So you felt satisfied. There we go. OK, that was easy. OK, that's heating
up. Yeah. Look down in there. Oh, wait. I still can't see it. How's that like? Yeah. Let's pop
this apart. Oh, that's good. It looks like baby vomit. Oh, yeah. Thanks. Now I'm thinking of that.
Now I'm thinking of more than vomit to. Oh, ah. Craig, you didn't tell me this was our Halloween
episode. I'm scared. Yeah. Get out the big chunks. Gross. Look at that. Oh, I'm looking at it.
That's freaking nasty. We're going to let that chooch in the buzz box for a bit. Boy, I don't know if I
can get that pilot out or not. I think maybe what we should do is get this soaking, get this cleaned
out, and then I'll try to pull the jets or get something in through them jets.
All right, well, let this soak. I'll just make sure that these are floating.
And I'm just going to make sure that they stay underwater. So I just stuck my sponge in there.
So then if there's a pinhole or whatever, that'll soak with water and we'll figure it out. Let that
get up to some temperature before we run it. And while that's doing that, we're going to clean the
slide and the needle. Look how crusty that is. So we want to get that cleaned off and we want to get
our needle cleaned off. Once we have the car body good and clean, we'll make sure that this is
working well. What else can we do? Okay, here's what I'm going to do. I'm going to put the drain
bolt back in, fill it up with oil. I'm going to put this two-speed gearbox all back together,
get this side buttoned up. I want to do a bullet connector on here so that we can plug it into our
coil wire. That'll make our kill switch work. I also need to get the carburetor cleaned up. I'm
going to hit go on the buzz box and then we are going to do this. You're done, Craig. Sounds like
a plan. Let's do it. This is where the dirt likes to hang out, I guess. I think a little bit of grease
on here will help hold the balls in place. Now if you listen real close, you can probably hear my
wrist click when these things come to torque. All right, let's clean this
up and we're going to put this back on. We're just going to leave the air filter out.
Oh, our floats are still floating. That's a good sign.
Okay, this isn't ideal but we're going to do it anyway because I looked and I do not have any
spark plugs of this fashion. I cleaned this one up a little bit. Look, I'm going to be honest,
we're just going to run it. That's the old spark plug. Did I say that? Did we check the old one?
No. There's no time for checking things where we're headed, Dan. Let's see what this looks like.
Tell you what, Dan, we're going to give it a shot. We could sit here and play with that all
day if we wanted to. We don't got time for that. We got places to be. That's right. Other bikes
to work on. That's right. Like no one in particular. That's right. Floats are floaty. That's a good sign.
Yeah, good enough. We're not building a piano here. That's what I always say, right Dan? That's
right. You're always saying it. I already forgot what you said but yeah, you're always saying it.
That's how it should work and then that's going to go on like that. Do my choke cable and then
this will sit down right over top. Okay, that's tight. Okay, we're getting this thing buttoned up
and it is feeling good. I'm going to bring over the gas tank and we're going to figure out what's
going on with the gas tank. See if we can just get out what's in it. Maybe we can get some fresh put
in and things will work and things will hold. Boy, wouldn't that be just fantastic. It'd be dandy.
It's pretty gross in there. That's the inside of our petcock. Ew. That's just joyful. Yeah,
it's fantabulous. Okay, so we had this screen. What screen is? We're going to forget we had that
screen. It's cleaner than when we started, right? Right. Correct. Now, what's going on in here?
Well, it'll run. Put a fuel filter on it. Let's put that fuel tank on there.
There we go. Let's fit on there. Yeah, there we go. Awesome. Oh, I moved the trash can. That
would have totally went in if I didn't move the trash can. Oh, it's true. Yeah, you move the
trash can a little bit. Let's see what happens here. This is pre-mix, so we're going to run pre-mix here.
French press. French press. So, taking the boys camping and riding this weekend down the Tennessee
with some friends, and I want my coffee, so I really remember to take the French press.
Okay, Dan, you know what time it is? It's time to clean off the workbench? It's time to clean
off the workbench. That's right. All right. Okay, table's cleaned off. Let's get this thing on the ground.
Oh, wait. Why is the front brake locked up now? It just doesn't like to go backwards or what?
Make burnouts easier. That front brake is definitely hanging up. Any better?
Why are we fixing the front brakes before we know if it runs? I don't know. Are you trying to stall?
No, not at all. I'm really excited. Okay, we cleaned the carburetor. We got spark,
and we have fresh gas. We have Amanda. Have a fuel filter, fresh fuel on. We put some oil back in it.
Got the kill switch to work. Unstuck the front brake real quick. Clutch still feels like it's
doing clutch stuff. I don't know. Is it still doing that? How many kicks is this thing going
to take to get started, Dan? Ten. It's not a bad guess, if I'm being honest. Okay, I'm going to go with
How cool is this? Let's see what we got.
How many is that? That was four. Four? I think it was four.
All right, give it some engine start. All right, or just... Oh, hold on.
That was ten. I lost them. Oh, slide must be stuck. Is that better?
Almost smells like something's burning already. It does.
Oh, yeah, come on. Oh, dude. It's shooting it out the intake.
Oh, why is it? It's just dumping a bunch of oil out.
That bottom end just be filled with that much oil? What would happen if I took the exhaust pipe off?
It's so close. Come on.
Smoking out every end.
Every pore of this bike has become an exhaust. Yeah, dude, it is like dumping oil out of
somewhere. But it runs. It's running! I'm going to pull a spark plug. Look at the spark plug.
Where was it blowing that oil out? Was it blowing it out of the exhaust? I can't quite see,
but there's a bunch of oil up here. Yeah, there's a bunch of oil in there.
Do you see any oil coming out? Oh, the exhaust pipe is loose. That's not even
on the cylinder. Oh, oh, really? Yeah. Oh, okay, that's good. Okay, that would explain
why there's smoke coming out the front. Yeah, I would explain that part of it.
I don't know. Oh, wait, did that just go in? Oh, I think I just got the header in.
A lot different. That sounds way different. That's better.
There's just oil pumping out of this motor. I'll try cleaning the plug once more.
Oh, yeah, that's nasty.
Ah, I was just about to kick it in the gear.
Oh, dang it.
Almost had it in the gear. All right, well, we heard this bike run. It's not running great. The
bottom end, I think, is filled with oil and it needs to be cleaned out, but would you believe
that these tires are still holding air for like a good 24 and a half hours by now? That's amazing.
Now, a lot of you guys in the comment section are wondering, like, so you got the bike running,
big deal, who cares? Well, there's a couple reasons I do this. The first reason is I think it's fun
and I enjoy doing it, so I did it. The second reason is because this bike sitting in a garage
or a barn or a wherever with flat tires, not knowing anything about it, only has a certain
amount of value. Now that we got it pulled out and we can hear it fire at least, that value
increases because the person looking for a project, like you guys at home, can hear it at least fire
and have an idea of what you're getting yourself into. That takes out a whole lot of guesswork,
so it increases the value of the bike. The other reason I'm stopping here, not going any further,
farther, farther, further, farther, farther, is because I am leaving in a couple hours
to take my boys on a camping dirt bike weekend, so I'm out of time and that is way more important
than this bike. A couple cool things I decided to do with this bike, because I get emails all the
time, what are you doing with that bike? What are you doing with this bike? What's that? I'm going
to put this bike up on our Shopify store. It is thebeardedmechanic.shop. Check it out. We're
going to list this bike, so by the time you're seeing this video Saturday morning, this bike
is going to be listed for sale and hopefully one of you guys out there is looking for a project
and this is right for you. Speaking of the website, we're going to do a bunch of updating
here shortly. We are running out of merch. That was kind of intentional because I wanted to update
stuff, so we got new shirts, new hoodies, beanies, all sorts of stuff coming out. Getting ready for
winter. Give me a couple weeks to get that stuff sorted. You guys have a great weekend. Find
yourselves an old bike. Start wrenching, having fun and learning. Guys, I got to get out of here
this week. I got some kids that want to go camping. You guys have a fantastic weekend. We'll see you
later.
