Carving Ski Lesson Part.2: Technique Drills & Skiing Tips @fabulousSki

Snowboarding
4 followers
Good morning, good morning from the Trivalles of France.
It's Fabio here from Fabio's Ski.
I'm here with Waldo, my friends, my Aussie friends.
Fabrizio, I want you to explain to me hip position and shoulder position in carving.
Hip position, there's no actually position.
Hips is a continuous movement that we do in the turn.
So the hips, the shoulders and hips are going together.
So we want the axis of the shoulders is the same as the hips.
So what happens when we angle our skis, we tilt our body into the turn like that.
So shoulders and hips are following the same line, you see.
We don't want to do any, try to avoid all the rotations.
We just want to tilt our body this way so that the more my hip is going that way,
the more my shoulder drops on this side to give a bit more pressure onto the outside ski tip down there.
The whole lower body moves in the turn in line in this way.
There is no more looking down the valley like in the lower level as you learn in the intermediate level.
Now you are advanced.
So as we start talking about carving high level skiers,
we talk more about the side to side movement rather than the up and down movement.
We don't do up, turn the shoulder in the valley like you used to do when you were an intermediate skier.
Now you are an advanced skier, solid on your ski forward and you move on the side.
Lower body goes in, upper body compensates in this way.
So the outside shoulder drops on the outside ski and follows this line.
You are still looking down where you are going to go for the next turn, but you don't rotate.
That's what you were doing a little bit.
You were rotating a little bit because you have been told over the years to keep the shoulder facing on the valley.
And that makes you rotate.
In carving, advanced carving, we try to avoid as much as we can rotations.
We do tilt, move our lower body into the turn in line this way.
I've heard people speak about body separation.
Could you explain body separation?
That's exactly what I was saying.
So the upper body is one part of the body.
The lower body starts from the waist down.
Body separation means to separate the upper and lower body.
Lower body goes in this way.
The upper body compensates.
So you see the line of the chest is perpendicular down.
You want to make a banana there.
That's the banana position.
We do the banana position.
We want to see that it's like a banana bending down the valley.
You see also your head is looking out this way.
It's not leaning in.
We don't want anything to fall into the turn.
When we try to compensate, we have the majority of the body weight going there on the outside ski tip by doing this separation.
What do you want to ask about your hands?
Hand position. I want to know about hand position.
For your particular problem is that your hands are back here.
In the turn, they stay back there.
They don't help you to maintain the balance.
Every time you feel that you start sitting down, you have your hands here.
You can use them.
Bring them a little bit more forward.
It can help you to be more solid forward on your shins working your skis till the end of the turn.
Then as you transition from turn to turn, you can have them a little bit wider.
Give a bit more balance.
But then they have to be always around this area.
Not dropping down like this.
Alright?
Maybe now we'll film some drills.
Carving drills.
Okay.
Starting in the fall line, we simply roll the edges from side to side following the shape of the skis.
The movement must start from the feet and not from the hips as most people do.
More and less you increase your edges as you go across the hill.
Helps you to feel both edges following each other and doing the same thing.
The skis are parallel.
They're doing the same thing.
You increase more the angle or you release.
Let's see Giugia in action.
Okay.
This was Head.
See you next time.
