15 Brilliant Ways to Jazz Up Plain Envelopes!

My corner of crafts
13 followers
💌 Jazz up your happy mail! Discover 15 brilliant ways to turn plain envelopes into WOW designs that will make your cards stand out before they’re even opened. ✨
Have you seen my Digital Store yet? I've got some FREEBIES to enjoy!
https://payhip.com/VillageCardandCrafts
Have a question or suggestions? Drop me an email at [email protected]
If you would rather drop a card in the mail...
Village Card and Crafts
PO Box 1003
Lady Lake, FL 32158
#diy #handicraft #craft
Want your cards to stand out before they're even open? I've got 15 quick and easy techniques
to take your plain envelopes and make them mailbox showstoppers. Let's get crafting.
Up first, ink and stamping techniques. All of my ideas today are going to focus on the flap
or the back of the envelope. I have a few options to decorate the flaps. You can actually decorate
on the envelope or on a scrap piece of cardstock. In most cases I use cardstock because my pre-made
envelopes that I've had for years need to be used and they're rather thin, so this gives them some
more stability. Now I'm just using this Woodware Mini Scented Bloom stamp, which I do not believe
is available anymore, and some VersaFine Black Onyx ink. And I am stamping off of that piece of
cardstock. Now how did I get the width of the cardstock? I made it a little wider and a little
longer than the flap, so in my case about six inches by two and a quarter inches. Pigment ink
does stay wetter for longer, so I'm just using my Ranger Heat It tool and giving it a quick dry.
Some double-sided tape adhered to that flap and just cut around the edge. And there we have a
envelope pretty simple. Number two is to stamp and color. I stamped directly onto my envelope
and colored with alcohol markers. Number three is simple ink blending. I am masking off with some
low-tack mint tape the flap. I don't want any ink on the rest of the card, I just want to keep it
on the flap. And I'm going to match my card with some Distress Oxides that apparently I'm having a
problem keeping all together. I'm using Tumbled Glass, Tattered Rose, and Scattered Straw. Using
the envelope is not going to give you the smoothest blend, but that's okay. I'm just worried about how
dark, so I'm just using a piece of scrap paper. If I hold my finger towards the head of the brush,
I get a much darker ink. I just wanted this light, so you'll see that I kind of hold my brush in the
middle and then it's just a softer look to the back of this envelope. I like kind of keeping my
inks rather random and using that rule of threes. I have three inks and I kind of started by putting
them in a rather triangular pattern on the envelope flap and here I'm just blending them
in just a little bit better and giving just a little bit more color. With that done, remove your
tape. I am going to give this just a little bit of blast of heat to dry off any of that ink that
might still be damp or wet. Simple in blending with our beautiful card. Number four is inking
with stamping, and once again I can't find the top of the ink. I have masked off my flap once again
and I'm using Distress Oxide Kitsch Flamingo. This is the ink that I actually did use on my card
and I want it to be a rather robust, bright color, so you'll notice that my hand position on the brush
is up towards the head of the brush. That way I give it a little bit more pressure and I get a
little bit more ink onto the flap. It's okay that it's rather splotchy. It doesn't really matter.
Worried about mailing inked envelopes? I've got the perfect solution. Stay till the end and I'll
share my special tip with you. Once again I am using my acrylic block, a woodware stamp, this
one's called Mini Floral Wonder, and VersaFine Black Onyx ink. Now I am putting a piece of paper
underneath the flap because I'm going to stamp off the edge. It looks more random that way and I want
to be able to get both parts of this stamp, including the leaves, in on this design but
kind of twist and turn to get that in there. You're going to notice that I still need something
at the top and if I stamp with just that little piece of masking or low-tech tape, I'm going to
get it all over the envelope. So I had to tuck a piece of scrap paper underneath that tape and now
I don't need to worry about getting any ink there. And a look at this beauty with this lovely card.
Next up is using stamping foam. This does not get enough use in my craft room. Now I did have
an image stamped into it so I'm just using my heated tool. If you have an embossing tool you
can use that as well. You want to heat up the foam for about 20 seconds and it will erase anything
that you've had in it before and it will also give you a much better impression. These are the
small stamping foams so it wasn't big enough to go across my entire width of envelope so I taped
two together. And I'm using an embossing folder and a couple of heavy acrylic blocks on the part
of the embossing folder that is raised up. I want to push that design into my stamping foam. Now I'm
going to look on the stamping foam and determine where exactly I want the image to be on the back
of my envelope. So I'm just going to kind of line up my piece of cardstock and yes there is a line
there, that's the drawback to it, but it is what it is. If I had the wider stamping foam which I believe
is six or seven inches wide it would work just fine. Now I'm using Distress Oxide Rustic Wilderness
and I'm just going over that design. It doesn't stain the stamping foam and it's going to leave
the image of the leaves lightly colored but the background will be green. So I'm giving it a good
healthy dose of ink making sure I've got where I want it and then I'm going to go ahead and just
give it a little spritz of water. In my case I kind of overdid it a little bit but no harm no foul
no one's going to be the wiser. You can use the ink that's on there for another impression or go
ahead and spritz it down with some water and just wipe it off with a damp cloth. You'll see it comes
right off. You can use any adhesive that you like. I find that the, I think this is a one inch
scrapbook.com double-sided tape works quite well. It's pretty strong and I'm just adhering that flap
flipping it over and cutting any remainder off. Then I'm just using a small domed foam blender
and the same Rustic Wilderness ink to kind of pounce some ink into that line and I'm also going
to define the edges with a little bit of that Rustic Wilderness and I think it goes very nicely
with our happy birthday card. My sixth example is stenciling with ink. Now I'm going to mask off
the flap of this particular envelope and I'm going to be using Distress Oxides along with this Vicky
Booten stencil. I love this one it's one of my favorites and it's an older one I'll see if I can
find it. It was from her Warm Wishes collection and it's called Pine Needles. I'm starting off
with some Twisted Citron ink and I want that kind of on the bottom. Remove your stencil and
give it a quick scrub or wipe down with just some regular water and a paper towel. It'll be just fine
and then we're going to reposition it and we're going to use a different color ink. This time
we're going to use Rustic Wilderness. Just look at how this complements this beautiful card.
I'm changing up number seven which is heat embossing and I'm using black cardstock this
time. I was pretty impressed with myself here because I actually remembered the anti-static
powder. Now I don't like that little powder bag, I don't like the way powder feels on my fingers,
so I found this Pink and Main anti-static powder in a brush that works beautifully for me and I'm
using it with a script stamp. Once again it's an older stamp and it's no longer in production.
Anything that you have in your stash will work and the stamp isn't wide enough because it is
an A2 stamp so I just stamped one side of it and I'm going to use some Gold Ranger fine detail
heat embossing powder. Honestly I was too lazy to find my WoW heat embossing tool, it's under my
desk somewhere. This was out so that's what I'm using. It does take a little bit longer to heat
emboss with the Ranger heated tool, it's really meant for drying as opposed to heat embossing,
but it does work. It just takes a little while longer. Now I'm reusing my stamp platform here
and I'm just lining up the script so it stays within the same line. I didn't want it to be
off in alignment so I'm doing the exact same thing. Once again I've used my scrapbook.com
double-sided adhesive, applied it to the flap of the card and lined this up. Flip it over and trim
off any excess and this one is still one of my all-time favorite cards but look at it with the
matching envelope. Number eight is watercolor and these are some metallic watercolors and I'm going
to use this bright blue and wait till you see the shine. You see how shiny that is? That's the color
it turns when it dries. Now the secret to watercolors is you can't just use a wet brush. You
have to activate the watercolor so give your watercolors a little spritz, give it a minute,
and then using a wet brush pick up some of your watercolor and again I'm just using a piece of
regular cardstock and I'm just adding color. There is nothing magical about this other than the
beautiful shine that it leaves at the end. Once it's dry there's a bonus tip here. You're going to
go ahead and adhere it like you would any other. Remember paper doesn't have a memory so you can
kind of bend it back into shape. I did use a heating tool here to dry it so I could get it
done quicker but it's already attached at this point and I'm going to flip it back over and this
time I'm going to use a little secret weapon. This is nothing more than an ultra fine and fine sharpie.
There's two pens in one here and I'm going to use that ultra fine one and I'm going to doodle.
Just add some squiggly lines. You'll see it's going to match the card itself and I'm just
adding a couple little squiggly lines here and there. I almost left it like that then I decided
not to. You do you. You can doodle flowers. You could doodle anything. It doesn't have to be perfect.
It's just doodling but in this case it totally matches the card. Next up paper techniques.
You can't get much easier than using beautiful patterned papers. Now I am going to start with
a six by six inch square. I've already measured out my piece and I'm just using six inches by
about two and an eighth for this one and in this case I'm going to go ahead and use liquid glue.
If you've been around my channel a while you know that I love my glue. This is Barely Arts
Precision Craft Glue. Just add glue to the flap and add your piece of patterned paper. It can't
be any simpler than this. Give it a good back rub, flip it over, and trim off any excess.
Here I use the same patterned paper that I used for the layer in my card. Number 10 is using your
strips of cardstock. This is a great way to use up those paper strips. I've decided to use them
with liquid glue. You could certainly use a double-sided adhesive sheet if you wanted.
This is just a piece of copy paper that I trimmed down because the cardstock itself has some good
weight so there's no need in using a second layer of cardstock. With the cost of postage these days
it's best to be economical where you can and using a piece of copy paper works just fine.
Tell me in the comments below what is your country's basic postal charge? How much does it
cost for a single stamp? And don't forget to tell us where you live! I've adhered my copy paper
right to the back of my envelope flap, trimmed along the edges, and voila! We have a beautiful
envelope flap to match this gorgeous card. Number 11 is using up those washi tapes that you know
are rolling around in the bottom of your drawer. Now I did lose some footage here but all I did
was attach some washi tape strips that match my card to my cardstock. I did wrap it around and
felt that it was necessary to put a liner inside to hide those washi tape ends. A double-sided
sheet would have worked just fine. Next up let's add some texture and dimension. There's truly
nothing easier than dry embossing and this is an older Spellbinders embossing folder called
Flower and Leaves and it happens to be one of my absolute favorites. It's not the three-dimensional
that we see today but it is lovely and just added to a piece of cardstock, adhered to our envelope
flap, and this makes a beautiful card and envelope for a sympathy card, a wedding card. This one
happens to be a sympathy but look at the beauty and simplicity there. Number 13 is embossing and
finishing it off with wax or inks. This one also has a metallic piece of cardstock so that's
another great way, kind of a bonus there, for adding beauty to the back of your card. Now once again
just using some double-sided adhesive here and I find that this is really quick and easy and sturdy.
I don't have to worry about anything coming apart if I use my double-sided tape but you saw I used
my liquid glue too and I have faith in that as well. The more texturized an envelope I would say
I would lean towards hand delivery rather than through the post office unless you use a special
type of mailer. I would probably put something like this inside of a bubble mailer before mailing it
because I don't want my artwork messed up in the mail and they tend to squash things. So someone
had suggested here in the United States that you could go in and ask them to hand cancel it
so that it doesn't go through the machine and that's an option. Have you done that? I've never
done that personally. I've always used a bubble mailer. This one you're going to finish off with
ink by just swiping or in this case I'm using foundry wax. This stuff is great. I'm just putting
a little bit out on, I think this one's gilded, it's the gold color one. I put a little bit out on
my reusable silicone mat from my Tim Holtz glass mat and I just put a little bit on my finger kind
of wipe it off and I'm just going to brush it across the raised areas of this embossing folder
which I believe is a Sizzix folder called engraved if I'm not mistaken. But the deal with
foundry wax is you have to heat set it. That's what makes it gold, I guess, but you do have to
heat set foundry wax and it's lovely. So I just use a little piece of damp paper towel, it comes
right up. I don't like using it on my glass mat, not gonna lie. It's a little harder to come up.
On the silicone mat, no big deal. On my finger, a little baby wipe, a little Dawn dishwashing liquid,
it comes right off, no problem. This is paired up with a happy birthday card but this could be
gorgeous for an anniversary card or a wedding card as well. Lovely. Number 14 is stenciling
with texture paste. Now I am making my own colored texture paste using golden extra heavy gel gloss
along with some distress oxide re-anchor. I think this one's candied apple and I'm just
giving it a good shake to mix the pigment and the dye and then I'm going to add a few drops
to my gel gloss. A little here goes a long way. Remember we're only doing a flap. I actually had
enough leftover that I did another piece of paper so I could use it for decoration for something
else but just add a couple drops, mix it up with your spatula and put it on your envelope flap.
I've masked off that envelope flap so I know where I'm going to place this. Line it up however you
like. This is yet another old stencil. I love this one. It's maybe Peppermint Kisses from Vicky
Booton. I love her stencils. Great value when you get her stencils and the packaging can be used for
card bases as well. You do have to let this dry. I would not heat set this but that's okay. I had
other things to do and I absolutely would not put this through the mail unless it was inside of
another mailing envelope like a bubble mailer. With this now dry though you have other options.
If you want to add more dimension you could put pearls in the middle, you could use enamel dots
or nuvo drops, something like that and look at how cute this card is. My last super easy and
fun technique is stenciling with transfer gel. Now you'll notice I do have some press and seal here
as well as those heavy rubber bands that I got based on what Tim Holtz had suggested and I have
to tell you these things have been sitting here for a couple of years and they work beautifully.
I am working on a single piece of cardstock and I've just given it a good mix and I'm applying
a very thin coat of the transfer gel to the same stencil. Now transfer gel is really kind of cool
stuff because it's going to dry clear and kind of tacky. You can use this with hot or cold foil
and you don't have to have a foiling machine. Does it come out absolutely perfect like it would
if you spent hundreds of dollars on a foil machine? Of course not! But it is gorgeous
nevertheless. I set this card aside to dry for a little while and I came back and you can see
that it's kind of tacky but completely clear and ready for foiling. I'm using this mink foil that
I got oh god forever ago at Joann Fabrics when they were still around and this is just kind of
holographic foil and I'm simply going to take a foil sheet and attach it with the shiny side up
because that's what you want to see and press it down with my hands. If I want to give it a better
pressure I can use a little brayer like I'm doing here. It's not necessary. You do whatever works
for you. As you take this off if something's not covered simply apply the foil back and
repress it down. It's really not hard. It's not perfect like I said but it comes out so pretty.
You can also put this through a laminator. I just use a laminating sheet but I didn't have time for
that and look at how pretty this is. Just stunning. Now let's attach it to the envelope and see it with
the card. It's one of my favorite techniques. It's quick, it's easy, and really doesn't revolve around
a lot of skill but it's beautiful. If you're worried about your ink blended envelopes getting
in touch with water while they're being mailed let me show you my secret weapon. This is Ranger's
Distress Micro Glaze and I'm going to apply it with a flat dauber. You can also use it with your
fingers. It's just fine. It kind of is a waxy substance and I'm just going to apply it to
those parts that I want to make waterproof and here I did add a little bit too much but that's
okay. I blotted it up and used it on another envelope and once you've applied it just take a
dry paper towel and wipe it away and then it's dry. Doesn't really make any difference to your
envelope. Here is the other envelope and I'm going to show you that it doesn't end up damaged.
I just sprayed some water in my hands and flicked it. Under normal circumstances that water would
cause lifting but you can see that it's kind of beaded up and I just take a damp paper towel and
wipe it away. No big deal. It's perfect. Don't go just yet. I've picked out a couple of other
videos that I think you're going to love. Until next time, I'll see you real soon.
