KTM 390 Adventure R Build | Ep 1 | Lets make it even BETTER!

Two-Wheeler Technology
5 followers
Nov 17, 2025
Hey Two Wheel Adventurers! Welcome to build episode 1 for the 390 adventure R. I've got some goodies from B&B offroad and it's time to get this build underway!
Now I've been having some serious fun getting to know the 390 Adventure R. Learning how
it feels and performs in pretty much its stock form, but throwing some shiny new parts on
a bike is probably the next best thing to riding them, in my opinion.
So in this video, that is exactly what we're doing.
It's time to get this build underway and start making this bike feel like my own.
I'll be filming the build as I go, seeing what works and what doesn't, and keeping you
all up to date with the progress and the products that I use.
So be sure to check the video's description at the end of this video if you want to grab
any of the items I use along the way.
Alright, let's get into this.
G'day to all Adventurers, welcome back to the channel, hope you're all doing well.
As usual, here it is, the 390 Adventure R, my very own 390 Adventure R, and it's finally
time to start getting some mods on this bike.
It's pretty well stock at this point, a couple of little things that I've done like change
the mirrors, I've added a quad lock, put some grip tape down here, but for the most part
this bike is still stock so I've got a bunch of parts sitting over here in a box waiting
to go and I really can't wait to get stuck into this.
I probably won't get all of this on here in this video but eventually we'll work it all
out but there's some key items here that I really can't wait to get on this bike and
things that I need to put on this bike before I take it out on any serious adventures.
So no mucking around, let's get straight into fitting up these parts.
I'll drag this box over, give you all a look at what's going to be going on the bike.
Now as you can see it's a pretty decent sized box so I've got a whole bunch of goodies here.
Everything in this box is from the legends at B&B Offroad Engineering.
Now I've used B&B products for years now on all of my previous bikes and I've never had
a single issue, it's really good quality stuff.
I reached out to the team, told them I was building the 390 Adventure R and they were
more than happy to jump on board and help out.
They've just released this whole range of products that they've got for the 390, the
Enduro and the Adventure right here so if you are interested in any of this stuff I'll
put the link down below over to their website where you can check it all out.
But also if you want to save yourself 5% make sure you use the code JOSHJB5.
Save yourself 5% off any of these awesome B&B Offroad products.
But let's jump in, see what we've actually got here to chuck on the bike.
Now everything here in this box is going to have a job to do.
It's either going to be protecting something on the bike or helping me carry something
extra on the bike so everything in here is in black.
I wanted to go for a bit of a black combo throughout the bike as I build it.
But first thing here is their tail rack, I haven't opened any of it, it's all still in
bubble wrap.
We've got their radiator guard which is a very important one I want to get on today.
This one here is one I really want to get on and this is their tail tidy kit, number
plate holder kit.
That should clean up the back end of this bike nicely so that'll probably be number
one that goes on.
They've also chucked in some of these strap stacks kits.
Now I haven't used these before but the guys did send me some photos and show me what they're
all about but they're all different sizes, M8, M6 and they are basically designed to
wind in onto any racks that you have on the bike and it just makes an extra tie down point
so I will test them out, see how they go.
Next thing we've got, this doesn't say what it is but I'm pretty sure it's to do with
the tail rack and goes down the side here.
Leave that to the side but I'm pretty sure it goes with this one which is their side
luggage panels which sit down the side here so that last piece I think teams up with this
and the tail rack to join all that together.
And then lastly down the bottom, the biggest one, this is the bash plate so that is another
really important one that I want on the bike before I go off doing any serious off-roading
and we've also got a couple of stickers in there so thank you team.
Now my plan of attack here is to get the protection items on first, things like the bash plate,
the radiator guard, then I want to get that tail tidy on because that will make the bike
look absolutely amazing and then all of the luggage extras I'll put them on last.
Now as you've seen there was a lot of stuff that come out of this box, now all of these
things add weight to your bike, I'm not exactly sure if I weighed that whole box what it would
weigh but it is all extra weight that you've got to carry on this bike so I'm keeping in
mind that this is only a 390cc engine and I don't want to weigh this bike down any more
than necessary.
Now I've been guilty of it in the past of putting things on bikes that I've built that
I don't really need and it just adds extra weight to the bike and weighs you down, see
a lot of people out there definitely doing it with throwing things on the bike that they
probably don't use all the time, probably don't need to be there so I'm a big believer
of getting rid of those items off the bike if they're not getting used, keep the weight
as low as possible so I'm keeping all that in mind with all of these parts here but I
think to do with the tail rack and the side luggage panels, obviously I'm going to fit
it all up, test it out, see how it goes but I think if I'm not heading away camping or
on a big adventure where I'm not carrying any luggage on the side, I'm probably going
to take all those items off just to keep the weight down on this bike, it's not a big twin,
it's not going to be able to cope with adding a whole heap of weight and it'll just slow
it down so that's what I'm thinking here, going to use it all, test it all out just
fine but make sure you keep in mind when you're building your own bike just like I am here,
everything goes on for a reason, if it's not there for a reason, if it's just there to look cool I
guess then you don't really need it, some things you can get away with like the tail tidy, I don't
need that but I'm very happy to put that on there because it's going to make the bike look awesome
so there are some things where you compromise on but just make sure you keep in mind the weight
of your bike, don't throw too many things on it especially if they're not going to be getting
used all the time but all that said, that is everything that I have here, time to jump in,
start getting all this fitted up and change the look of this 390. So I absolutely couldn't wait
to get this tail tidy fitted up to the 390, surely I'm not the only one that hates the look of these
ugly stock number plate holders that's for sure, now one thing with these B&B products that I love
is that their instructions are really simple and easy to follow so even if you've never done
anything like this before you should be able to follow along and do some sort of DIY if you do
want to. All I had to do was undo everything holding on to the old tail assembly so I could
remove that including disconnecting some of the wiring around the indicators and the tail light
then I needed to remove the indicators and the tail lights themselves so they could be fitted
to the new tail assembly. Now if you decide to do this yourself make sure you mark your left and
right indicators before you remove them it'll just make the job a lot easier and you don't want to
mess that one up that's for sure. So there you go tail tidy all done fitted up really easy to do
if you just follow all the instructions that come with it from B&B Offroad. One thing I did a little
bit differently is this right here this is their integrated reflector and number plate light I
didn't want to have this big reflector there on the back I feel like it looks a little bit ugly
so what I did was drill a couple of new holes in here and I used this which is the light that
comes on the stock kit that's sitting over there I feel like it looks a lot neater than having this
bright reflector in there instead so just something I did a little bit differently if you want to do
it that's completely up to you but it comes with everything in the kit to use this. One bonus with
this also was I just had to use the original wiring so I didn't have to use these cables here
and crimp them together or anything like that but that's just me maybe you want to have that
reflector on there but each to their own. Now it's time to move on to the next project I'll probably
do the radiator guards first and then we'll have a look at that bash plate and see what I can do
there but tail tidy looks awesome I love the way it changes the look of the bike wish it was on
there sooner but it's all done now on to the next. Now the radiator guard was a nice simple install
basically you just need to undo everything holding on to that original guard and then remove it then
the B&B guard basically bolts back on using the same bolt holes except there are a couple of extra
mounts at the bottom end of the guard which do add some extra support and protection as well
but again the instructions here were nice and detailed so it was really easy to figure out
it looks cool and it should protect the radiator a lot better than the original one. Next it was
time to open up this thing of beauty the bash guard now this would have to be one of the most
important items to any adventure or off-road bike if you bottom out on something hard enough with
a stock bash guard you're most likely going to be having a bad day I'd hate to be stranded with
a cracked engine casing on the side of a track so a proper bash guard helps protect the very
important underside of the bike just like this one most stock bash guards are only really good
for stopping small stones or rocks so you really want to make sure the underside of your bike is
protected the best way it can. So while I'm just taking off these components and mounts so I can
get this new bash plate on I did have a quick look to see how much extra weight this new bash plate
is actually going to add it's going to add around about two kilograms in total the bash plate the
new bash plate and all the components bolts everything it's around about three kilos maybe
just a tad over and everything that comes off and the weight that you lose that's already on here
it's about 1.3 so we're gonna be left with about two kilograms in total which is fine as I said
earlier if you're gonna put things on your bike make sure it has a purpose if you're adding that
extra weight and a bash plate is something that I need the stock one is so flimsy if I hit a big
rock it's not going to protect anything can't even put a lift stand under this thing so the new bash
plate is definitely needed but an extra two kilos I can deal with that and I'm gonna have to get
underneath here to get this one out but this uses the engine mount bolts that's up here runs straight
through across the front so I have to undo the engine mount bolts pull out some spaces this will
slip just straight in there and then it mounts in underneath on these existing mounts that were
used on the original bash plate down there near the exhaust so should be nice and sturdy using
those engine mounts there I imagine that would be pretty strong if they're holding the engine in
there so for a bash plate I'm sure it's a great spot to mount it up but get that on and then
it a few key components done on the 390 build bash plate and the radiator guard very important on
any off-road bike and have that tail tidy done to make the bike look absolutely awesome I'm really
happy with that it's always great using B&B off-road products they always just work it's
really simple to install them with all their instructions so couldn't be happier with how
that went I've got a whole bunch of other things down here on the ground ready to go but I'm gonna
leave all of these items till another video all these items here which are these these are their
side luggage panels this is their tail rack and then these pieces here tie both those side panels
and the tail rack in together but I'll leave all these for another video the next video will be
all dedicated to carrying luggage on the 390 using these B&B off-road products now these side
luggage panels work perfectly with Krieger OS bags now if you followed the channel long enough
you know that I love all my Krieger gear so I've got plenty of bags over there to test out once I
fit up these panels so the next video will be all about carrying luggage on the 390 a couple of
different options using these and not using these as well so if you want to find out how that all
works make sure you subscribe the channel before you go and remember if you are interested in any
of these B&B off-road products that you see here that I've put on jump over to their website which
I will put down in the videos description check out all their range for the 390 and the Enduro
390 as well or any other bike that you have they do a whole range of bikes on there so check out
all their products make sure you use the code JoshJB5 save yourself 5% on all of the B&B off-road
range thanks so much for watching this video be sure to jump down in the videos description check
all the links there and support all my other partners support the channel directly if you
want to I have just opened up memberships on my youtube channel you can get early access to any
videos that I put out but don't feel like you have to the videos will still be coming for free every
Sunday that I put them out there but it's just an option if any of you want to support the channel
more directly but thanks so much for watching if you did enjoy this one be sure to like it before
you go ride safe on your own two-wheel adventures I'll see you in the next one
