After the Fall: The Conservation of Tullio Lombardo's "Adam"

Classical Artwork Conservation
262 followers
5 Video Views·Nov 17, 2025
Conservators, scientists, and curators tell the story behind the unprecedented conservation of Tullio Lombardo's "Adam."
Comments are disabled for this video.
It was a Monday morning and I got to work and I got a phone call from Jack Sultanian
and he said, can you come to the Blumenthal patio? There's been an incident. He sounded very serious
so of course I went upstairs and I saw the sculpture and pieces all over the floor.
He was on a plywood pedestal and that collapsed. It buckled underneath the weight of the sculpture.
For a piece, you know, that important to be damaged was something catastrophic.
Really high quality Renaissance sculpture outside of Italy is not common. This was an iconic piece
in being one of the earliest nudes going back to inspiration from antiquity. I think there's
a purification of form going on here that makes it even exceptional in Renaissance depictions of
Adam overall. There's this forthright and yet dreamy quality about the Tullio that set it apart.
The reaction is to document everything as it is just like you would on a crime scene. We
immediately began plotting out a grid on the floor and then we went and took a picture of
every single square and after that we began to pick up the pieces. He's in about 28 major
fragments but there are hundreds of very small fragments and it was all saved. Then there was
just a period of pausing and trying to come up with a general plan of what to do. I proposed
that we may be able to utilize three-dimensional imaging. If we scanned the object, we could
create a virtual reconstruction and hopefully move on to doing finite element analysis of the piece.
You're taking a structure and you're basically turning it into a 3D jigsaw puzzle. The difference
being that all the pieces in that puzzle are glued together. You're analyzing what's happening with
each individual piece and then determining how that pertains to the entire structure because
all the pieces are connected together. The color distributions that you see are graphical
representations of stress distribution or displacement. If we were to be asked, look you
have to put this together next month, we would have done what we've always done before. We would
have drilled holes in every joint, used stainless steel pins rather large and long to put this
sculpture back together and use very strong adhesives. But we wanted to say, can we step back
from those materials? We have a class of acrylic adhesives that we use commonly in conservation
that are reversible. They've never really been tested adequately for the kind of stress that
fragments of the atom would be under when they were rejoined. So this is about an engineering
material science approach that includes mechanical testing, computer science. What
arose out of that work was the fact that these reversible adhesives are strong enough to carry
some of the big joints on this sculpture all by themselves. Stones and all materials have a
different strength and they have a different stiffness and there are pinning materials that
have similarly different stiffnesses. And as we assessed different pinning materials, we came
to a material which needed to be stressed very, very highly to fail. But when it failed, the pin
failed without damage to the stone and that pin turned out to be fiberglass. We sort of from the
beginning felt that the ankles, because of the stress on them, basically had the whole weight
of the sculpture on a relatively small surface area, that they were going to require some pinning.
We ultimately wound up drilling it only in one other area, which was this fragment in one of
the knees, which was an area where the angle of stress really shifted very quickly and where there
was a small fragment at the knee which lessened the stability of that joint and had to be dealt with.
The breaks on the sculpture were so fresh, we wanted to minimize the amount of times we
put the pieces together, took them apart, moved things around. We sort of collectively came up
with this idea, like wouldn't it be great if we had another sculpture? And of course we weren't
just going to break any sculpture, a work of art, so we thought that we could get some kind of
reproduction. There was a possibility of getting this very ugly marble statue of David. We broke
that David along the fracture lines of Adam. And we used that to plan our armature. There was a
full-scale copy made CNC milled piece of each and every piece of Adam. We then applied those concepts
to the milled version. Those carbon fiber straps could be taken off the model and used directly on
the sculpture. We're starting at the ankles and we glued the two ankles and then we stacked
everything up just for the ankles, so we knew that everything was in line. And then we slowly worked
our way from the bottom up, joining the legs to the torso. We were aligning two places, all very rigid.
Michael was on one leg, I was on the other, and we became very familiar with our particular joint.
When you're just going stone to stone, things kind of lock together in a very nice, satisfying way.
When you put the adhesive in there, things kind of move around. It's like having ball bearings in
the joint, and you really need to let that adhesive kind of ooze out to create a very consistent film.
After years of seeing, you know, his fragments, to have the head on and actually have it be a
complete form was quite an amazing moment. Congratulations, Michael.
Luckily, the major fragments fit together very well, but in other areas, particularly in the arms
and hands, there was considerable damage. In terms of the aesthetic presentation of the sculpture,
it's going to be those small fills that are going to be the most critical aspect.
Over the years, dirt had accumulated on the sculpture. It was cleaned before filling any
of the losses. You work on different areas of the sculpture simultaneously. The main philosophy is
to have an even surface. When it comes to putting on fills or retouching something, we always use
reversible materials. We tried to get everything we could out of this horrible accident. I think
in the end, he will be back to where he was. So, is that the same or not? That's for everybody else
to decide, but I think that the spirit of the sculpture and the true beauty of it is still there.
