BACÁICOA #ESCOBAS ARTESANAS | El #brezo, o “#biércol” es un #arbusto muy ramificado que se da con abundancia en los terrenos arenosos. En el año 2002, Agustín López, en la localidad navarra de #Bakaiku mantenía todavía la tradición de fabricar escobas de brezo y nos mostró paso a paso cómo era este trabajo artesanal. #Documental
Si te ha gustado este documental, puedes mostrar tu APOYO y AYUDA para que el canal siga creciendo con los botones “Gracias” y “Miembro de Canal” que aparecen debajo de cada vídeo.
También puedes conocer más sobre mi vida, trabajo y trayectoria en este DOCUMENTAL BIOGRÁFICO: • EUGENIO MONESMA. 40 años de vida, trayecto...
Sígueme en mis REDES SOCIALES: -FACEBOOK: / eugeniodocumentales -INSTAGRAM: / eugeniomonesma -TIKTOK: / eugenio_documentales -TWITTER: / eugeniomonesma Transcripción
Eugenio Monesma - Documentales
Heather, or "biércol" is a highly branched shrub that grows abundantly in
sandy soils. Agustín López, in the Navarran town of Bacáicoa,
still maintains the tradition of making heather brooms.
As the old broom makers worked, Agustín ties his brooms with bramble bark.
To do this, on his way out to the mountains, he picks up the brambles and pulls out their spikes.
“There are those who prefer these that have brambles and others, well, they don't care, because
the broom itself is the same, whether it is made of brambles or wire, and this one, as it has brambles and wire, is very good.
It has to be a bramble that has a normal thickness and has its
length, because if it is short, when we go around the broom we are left with not
enough and to go around the broom eight times its length is needed.
It is so. Very good. The bush is already there."
Once he has separated the thorns, Agustín goes to collect the briar bushes
he needs to make a broom.
“This what I am doing is combing. Soon I'm going to start cutting and soon I'm going to
start cutting now. Nothing, this is combed to know how the row or heather is going and
the length can be seen. Seeing the length, it begins to cut slowly. Now we are cutting.
Now we are cutting. There is."
“Now we have to pick up the broom. How's gonna get done?. I'm going to go take
it now. This costs a lot because it is not very good what there is. But let's see. And you have
to pick everything as clean as possible, that they don't have grass, that they don't have leaves, that
the sticks that you pick, the lint, or the heather, that they don't go crooked. Let them all go
straight. You always have to look and comb to see if
the strand is long enough to make a broom.”
“The spinning material is ready to make the broom.
So now I put a "tape" that we call it, a wire.
And this is already tied, and left quietly because the broom is already there. It is now transported
home or left here for a month or two, let it dry out and lose its nerve,
let it stand straight as a stick. And when you see that you have put all this leaf and it is already well cured,
then you can start making the broom, and that is when
the straight broom comes out.” “Well, let's start with
the bush. Let's start with the bush. Here is a knot and this one is left over. It cuts. So, okay.
Here is the bush that is long enough. Now, this is cut very
patiently. This is cut in half and that's enough to make two brooms."
“Now you have to forge it or crush it a bit so that the fibers become strong
, otherwise they would break. You have to give it, crush it a little.
With the separation of the fibers Agustín has
converted the rigidity of the bramble into flexibility.
“Well, we already have a bush ready. Now this has to be left to
dry, dry for a few days, and then you can start tying the broom.
Well, with this we finish the forging of the brambles.”
Let's start with the broom.
We remove the "attalazo", we will put it
under here and now we go with the broom. Now, we begin to tie the broom.
Take the wire and a handful of these "strands", give it a turn, tie
a knot there and that's it. And now we are starting to do it.
And you have to use the mallet now, force is nothing, the mallet, because here there is a lever that makes a lathe.
We have already given the first one, now as it has three bundles we are going with the second one.
And you take some "hilarras" or heather that we call this and turn around twice,
to the "hilarras", and stay there. And now again we start giving him
the second bundle. First you have to give it slowly, without squeezing, but once it has
taken one turn, we start with the mallet again, so that the broom does not deform, so it goes
round, round. Now there is no care, now it can be given.
“We have already given him the second and we are back with the third and that will be the definitive one for the
broom. We do the same as before, one turn and two turns. And we went right in giving it.”
Agustín uses the pedal to stop the exit of the wire at will.
“It is convenient for the broom to be tight, so that the handle does not come out so easily.
And now we take a punch. We go under the two wires that there are, and since
the punch has a point, turning the punch has already caught it. Now I make a lever and
a "U" comes out here. And that's the end of the bundle. Then the pliers are taken, we cut and
crush it. And there is the third bundle of the broom. And now, well, the broom is already tied.
And now we're going to remove the top tips.
Very good. This one is already. Now we cut the length of the brooms.
I have the measurement here. Yes, so that all the brooms come out to a measure.
I already have the measurement marked. Now I'm cutting the ends. Voucher?. There I go."
Now we are going to sew it. First we place the needle, we insert here through
a slot that I have and here we insert through another hole that it has, so that
the needle is held. Now we take and put the wire
that seems to me to be far away. Very good. There it is. So I pick up the broom. I take a good look at
where I think it's prettiest, let's say it has the finest "string",
I take it and now I hit it there. That's it. It's already in. Very good.
What happens now?. That we have said before that a thread was hanging, a thread of wire, and now
I have the wire in my hand. And what do I do with this wire? Well, all I do is go through a
slot on my side. I pass the wire to it and I twist it, I give it one turn. Then all I
have to do is remove the needle, that is, the broom from the needle. I take out the needle. And what do I do? I imprison,
pull, pull, pull, because I already have the knot tied there. The knot has
caught there. The knot is already there. Very good. Agree. Since you already have the knot there,
now I take the pliers, I take the pliers and I take it to this
end that brought the thread. And what do I do? I hold everything I can. And what do I do? I take the broom and
turn the broom and it turns out that the knot has already reached the broom. It's already sewn.
We are going to cover it with bramble, as it was done before, but now we make it
much stronger than before. Now stronger, because before a bundle was given and then the
bramble was made and the broom was loose and fat. And now, in this way, the broom is not so loose. That I tie it
here, the wire, the thread of the wire to the bramble, I tie it, so that it has a bit of support.
So now, I pick up and continue on the lathe, it winds around the lathe like wire, the same, the same.
Very good. Putting, putting Very good. There. Okay."
“This is quite expensive. This is taken here, with this needle here and you try to go
down here, which is quite difficult. This is hard to get through, but it will get done.
You take this and more or less put it there. That would be the knot that must be
given to the bramble. So when I tie the knot I put this little needle, a little needle on the other
side. But, now I start to work as it is necessary to start again, just as if I
were doing it before with the wire. And before, as you had to
work under the foot, they were bad postures and it was not tensed well.”
And I sharpen a little bit so that I can go through the slot I have here.
Let's try now that I'm lucky and I get through here well, through the tunnel.
And now, we take this...
Okay. The tie is already there. The bramble is already tied. There it is. Now we sew in the center.
There I go with the punch inside. Very good.
And now I'm going to put another punch through here.
This is more expensive than the wire one, it costs more.
Hey, how strong is he? And now, this tie that
we are giving the last one, we are going to pass it under these two bundles so that it
is firmly tied.
Agustín handles the technique of stitching with bramble fiber with the ease and security that comes from many years of experience as a broom maker.
“And, practically, the broom is ready to sweep, but the stick is missing. Well,
then, right now we are going to put the stick in this.”
Let's make the broomstick.
It is beech. Good wood.
Beech is good wood. Also chestnut, hazel, acacia. Well, there are several types of material that can be made.
“My father used to make brooms,
ever since he was a kid. Because there were many threshing floors here, and wheat, barley and beans.
It was done in the street in the eras. With the trails
Then my father would go to the mountain, cut this "strand", this heather and did.
But not so pretty. And the year 54 or 55 is when my mother's cousin had quite a few orders
and was quite old and I started working with him. And we already passed until 60 or
61 at least, to the broom. And that's when we only lived off the broom."
"Voucher. Well, the ax is already. Now we go with the brush. Let's go brushing."
Once the handle has been roughened with an ax blow, Agustín brushes the surface until it is polished.
"Okay. The handle is already there. There's the handle.
Not turning, but… Heh, heh.”
Each broommaker has used the most abundant wood in their environment for the handles. Whatever the tree of origin,
you have to sharpen it to insert it into the broom.
The tip of the handle is already removed. See how it comes out. There it is, perfectly.
The stick is placed in the center. And we are inserting now, and we are going to go
smooth, so that it does not twist. He is going to enter. There is. A) Yes. A) Yes. A) Yes. Okay.
This is worth it. That's it. There's the broom. Ready."
The broom is now ready to sweep. The craft fairs of the
towns of Navarra are the points that Agustín takes advantage of to show and sell his work.
Agustín López from the Navarran town of Bacáicoa is a benchmark in the manufacture of
these briar or biércol brooms, which in times past were in great
demand. Today, the implantation of plastic in our society is about to
corner this old craft tradition into oblivion.
I'm Eugenio Monesma, director and producer of the documentary you just saw.
If you liked it, I encourage you to subscribe to the channel by activating
the notifications from the bell and so you can enjoy the hundreds
of documentaries that I already have on the channel and those that I will upload weekly.