DIY footstool stool with recycled pallets. Sgabello / rialzo con scarti pedana

Exquisite jewelry
18 followers
2 Video Views·Nov 15, 2025
Realizzazione di un semplice rialzo, banchetto, piccola pedana in legno mediante l'utilizzo di scarti di bancali.
Hello, I'm Katy, and today I'm going to show you how to make this very simple earring.
We made this pretty little flower pattern with a pearl cap in the middle.
And then we made a little movement down here with a few additional small pearls.
All materials that I use today come from the Relax-N-Kräft-Abo from March 2025.
If you want to see it, you can find the link below.
There are still a few boxes left at the moment, but if you look at it in the future,
there will probably not be any excess boxes anymore.
But there will be new boxes.
So it's always worth taking a look.
Before I start, don't forget to like this video and subscribe to my channel.
Click on the bell and select everything.
Then you won't miss any of my children's tutorials anymore.
So let's get started.
So we need the following.
Everything we need is, as I said, from the subscription box.
We need ear wire.
So, I mean, you need two of them.
I've already made one.
An ear hook, a bead ring, one of your pearl caps and a few needles.
These are the beautiful needles with a flat end,
so that you don't see so much of the metal at the end.
I have a few of these beautiful plum blossom thorn mill precious stones.
These are 3 mm large faceted precious stones with a drill hole.
And I have my beautiful aventurine.
This is an 8 mm large pearl.
You can find all the details below.
The tools you need are basic tools for jewelry making.
We have a few cutters, a few side cutters and a few side cutters.
When I speak of a flush cut, I mean that we cut with the side that we want to put on the jewelry with the flush side.
So this is the flush-cutting side.
This is the flat side.
When you turn it around, it has this little groove.
We don't want this side.
We throw it away.
So these are your cutters.
I have a simple round pliers here.
You can also use a pointed pliers or a flat round pliers.
I prefer my flat round pliers.
These here with the red handles are also available at Relaxenkräft, and I can highly recommend them.
I use them all the time.
There is also the Zurum brand there.
So put them aside for a moment.
First we will make this little detail here in the middle.
This little floral detail.
And for that we use a normal pearl cap like this one here.
A pearl cap would normally be placed on a pearl like a small cap and give it a little more detail.
But I like to use things differently.
So I'm going to flatten the whole thing now.
You can use your flat round pliers for this.
You can also use a pointed pliers or a flat pliers.
I basically use the pointed pliers for this, because most people have one like this.
You have to put the pliers pretty far down.
Do you see how far I went down?
It only jumps out a little bit on each side.
And you just have to press it down slightly.
Just a little bit.
And then, you see, I just turn it very lightly.
And press it down a little bit.
And at some point it will just jump out, like just now.
And you just have to turn it and press it down.
Turn and press it down.
And now you have a little flower pattern.
Nice and flat.
And it's ready to use.
It already has all these little holes, all these little openings, so that we can attach it.
So you could, even if you don't want to attach the bearing, attach individual small torsion bars to it.
So it looks beautiful.
I love using it like this.
You could even just connect them with bearings.
You could connect many of them together.
You could make an armband out of it.
You could just make long earrings.
You can do so much with a pearl cap.
We now have our flattened pearl cap ready to use.
So we are in the preparation phase.
And now we want to make all these little pendants at the end.
These are the pomegranates, the plum blossom pomegranates.
I take one of my knitting needles.
These are the knitting needles with the flat end.
Please excuse my nails at the moment.
I will saw them out later.
Um, yes, these are the ones with the flat ends.
So we put them on.
So we just make wrapped loops and then they are all put on a bearing.
So we put it on.
You can use the outer tip of your pointed pliers.
With the pointed pliers with a curved tip you would use this tip and with the pointed pliers the outer tip.
As long as you only have the smallest space, a tiny little bit of space, right up to the gemstone.
Then you push it away at a 45 degree angle.
As you can see here, we have this 45 degree angle.
Then you take your round pliers.
You hold this piece of wire, which goes not on the small stem, but as close as possible to the end of your pliers, so that we make a very small loop around it.
From there we just push it around.
We just push it around.
At this point the position is new.
We just turn our wrist, open it and reposition it.
Whether you go over it or down it, it's up to you.
And you have to cross that, so that you have this pretty little loop at the end when you take it out.
Then you take your round pliers and switch to your pointed pliers or your curved pliers and hold the loop tight.
If you hold the loop tight, the shape remains.
If you leave the other pliers in, it gets more difficult.
Since it's a pretty short pinhead, I use another pair of pliers, which I then use as an additional pair of hands.
That just makes it a little easier.
I just make sure that I go around at least twice.
I turn the pinhead around and go around at least twice.
Now there is only this little piece of wire left.
There is no more space for this little piece of wire.
So I cut off the little piece of wire with the flat side of my pliers as close as possible to the piece that I want to keep.
There will still be a little bit of wire sticking out, as you can see.
And then you just take your pointed pliers or your pointed pliers and squeeze it in there.
Press the little end in.
Make sure that it is squeezed in reasonably and you just work it around.
You don't want anything to stick out or come out.
And if you have hair that is longer than your ears, then of course you don't want anything to get caught in it.
So that's one.
We need five of them.
I'll show you again how to do it, and then I'll do the others and then you'll be back.
This time it's a little faster.
Put the pin in.
Make this little gap with the tip of your pliers.
Push it away.
Push your pliers in nice and tight.
A nice little loop.
Push it around and across.
And then you can hold on to the loop and start turning it around.
And because it's a short piece of wire, I'm going to use my other pliers to wrap it around nicely and neatly.
Until I'm sure it won't stick out any further.
I'm satisfied.
Then I can just cut it off with my pliers.
And then just take your time and make sure that this end is properly clamped in.
I'm satisfied with that, too.
I'm just going to do three more of them and I'll be back with you in a few seconds.
So I made my five pendants out of my plum blossom tourmaline.
I finished my little flower.
Now I have to prepare my pearls.
I forgot to mention one thing at the beginning, that you need 0.6 mm wire.
It's included in the box, if you have it.
But of course I didn't mention it at the beginning.
But it will be further down in the details.
So you can also work from the roll, if you want.
I find it easier if I just take a piece, if I show it.
But you don't have to do that.
There will be a bit of waste.
So we have to attach a loop here.
And at the other end is another loop, which is attached to our earhook.
With this first loop we make loops again.
So we just work.
That's way too much wire.
But we just work a little further down.
We're just going to use this little section here.
So just make sure you have enough to make your loop and your curls.
So we want a nice little loop.
Just like the one we just made.
So, all around.
Position your pliers again.
Take them across.
Now we have to attach them to one of our loops in our pearl cap.
Before we do anything else.
So we're just going to widen them a little bit, so that it fits in.
That's going to be a little trickier now.
I just grab it and hold it in front of the camera.
So we have to hold everything in place while we wrap it.
I just grab it with the tip of my pliers.
You see, there's the little flower on it.
And now I just start wrapping.
I want three wraps.
That's one.
The wire is much softer.
That's two.
With 0.6 it can be worked wonderfully.
And three.
So, yes.
I'm sorry if you don't know what 0.6 millimeters are.
M, that's the American wire strength.
It's 22.
You can find a complete list of British and US American terms below in this video.
So squeezed in nicely.
We have our little wraps in there.
Now we can add our beautiful green aventurine.
So, now we have to make another loop at the top.
So we're going to make a little loop at the top.
You can do this in one direction or the other.
I'll just show you here.
Here I have my loops facing forward.
And you see that my loop points in the same direction on both sides.
That meant that I had to turn the loop on my earhook when I wanted to attach it to my earhook.
So it's up to you whether you turn this loop now and turn it in the other direction or whether you attach the earhook.
It doesn't make a big difference.
You just have to make sure that you do the same for both.
So I'm going to do both loops in the same direction.
You see that my loop is there.
So I'm going to pull it over.
I just created this little space, just like we did before.
So there are a few loops here.
And then I'm going to make my wrapped loop.
The loop on the earhook can be opened.
So I don't have to attach it while I make this wrapped loop.
It only works if you attach it to something that you can't open.
So this time we're going to add something that you can easily attach.
One, two, three.
Wrap three times.
Press everything together nicely and cut off the wire.
As you can see, you don't waste small pieces of wire when you work from the roll.
But I have a small pot in which I put these things so that I can reuse them.
We don't like to waste anything.
So let's just make sure that it's nice and tight.
Now we can put everything together.
As I said, the earhook is on me.
Because if I attach it now, my flower is pointing in the wrong direction.
Is that understandable?
I'm looking in the wrong direction.
So I'm turning the loop.
So I hold everything tight and just turn the loop on my earhook.
I could also turn the loop on my workpiece.
It's all on me.
So make sure that your little flower has a right and a left side.
So make sure that the right side points forward.
And then we can close the loop again.
Remember, when we open and close loops, we never open them like this.
We turn them so that they open like a door and everything returns to the same place.
Next, you take one of your bending rings.
You open it and look for the little loop at the bottom and push it through.
That's pretty wobbly.
So I take a moment to put it through.
There we have it.
Now we have it on.
We just have to wiggle it a little bit.
So, there we have it.
Now I have it through.
It moves a little bit.
Now I have it through.
I just have to put my little earhook in.
So, just put it directly on the bending ring.
Through the bending ring they have a lot of freedom of movement.
That looks really nice.
But you don't want the earring to be too stiff in the ear.
A lot of freedom of movement is great.
And then we close them by simply turning them together.
See?
That's all we have to put together to make sure that everything is nicely closed.
And then we have to put this over here.
We have our matching earrings.
And now we have a pair of beautiful flower earrings.
Perfect for spring, I think.
I think they are beautiful.
I have another design here that I will implement.
And that comes from this RELAXEN power box.
Of course you don't need the RELAXEN power box.
You can also use your own materials.
But this is just a guide that is based on it.
Don't forget to like my channel, subscribe to my channel and click on the bell.
So you don't miss any of my videos.
I have many more videos in the works.
I'll show you a little preview now when I open the package.
This is the other earring I'm making right now.
This one has the white opal in it and this beautiful frame.
I'll show you now how to make it.
And I'll see you all again very soon.
Take care!
