JADE PLANT INDOOR WINTER CARE | Repot And Propagation! #jadeplant #succulents #houseplants

Green Happiness
146 followers
Hey, it's Jeff, welcome back to another video.
It's been a while since I filmed anything upstairs here, but we had a little accident
last night with my jade plant, which I'll get to in a second.
I just want to say the sun is out.
It's an absolutely gorgeous day.
It's finally not minus 20 or minus 30 out.
You can have the door open, you can have the window open, getting some fresh air.
So anyways, like I said, we had a little bit of an accident last night with this jade plant.
It actually fell off the table and I just want to show you, it is super top heavy, like
even just the slightest touch.
So yeah, there is a little bit of damage.
Oscar is running around like crazy.
What is he doing?
So anyways, we lost a branch there and there is a few other areas like right here.
This branch is snapped as well.
So lost a bunch of leaves.
So yeah, it got pretty banged up.
So I'm going to have to pull it out of this pot, put it in something a little bit larger
just so it's not top heavy.
I'm going to have to maybe do a little bit of pruning here as well.
It's a pretty lopsided, a lot of weight on this side.
So I'm going to chop back a little bit.
So I'm just going to answer some questions along the way as well for jade plants indoors
during the winter and what I do to care for them, if you can propagate them, if you can
repot them, that sort of thing.
So let's get into it.
So I still keep my jade plants in my south facing window throughout the winter.
And even though it is getting a ton of bright light, I'll show you here with my light meter.
Right now, it is still getting almost 2000 foot candles.
It's 152, but it is times by 10.
So it is getting around that almost 2000 foot candles.
So even though it is getting a large amount of light, the days in the winter are shorter.
So you will probably notice your jade plant not growing as vigorously or as fast as it
would in the summer, just simply because the days are shorter in the winter.
It's not receiving as much sunlight as it normally would, even though it's still getting
a ton of bright light.
So I guess the next question is, is can you prune plants or succulents in the winter?
And the short answer is yes.
But just due to the shorter days, you'll probably notice very minimal growth or very, very slow.
I did a little experiment, I want to say maybe a month ago, I chopped the top off one stem
here and it is finally just starting to push out the smallest little stem right here.
I want to say this was a previous branch before the prune.
So you can see just a very, very small branch where this should be much larger or have grown
much faster if it was during the summer.
So yes, you can prune, it will start to branch out or push out some new buds, but just expect
that rate of growth much slower throughout the winter.
Even on my other ones here, it really hasn't pushed out any growth for the last couple
of months.
So I got this jade, this one right here, this larger tree version, and I got another one
right here as well.
It has been losing like right here, you can see a little leaf has been losing a couple
leaves that is completely normal.
With the summer comes the heat and the sun.
So the plant uses all that energy from the sun as well as water and nutrients to push
out new growth.
So now that everything is slowed down, you probably won't have to water as often, but
it can be pretty difficult to tell when to water a succulent or a jade plant in particular.
And I always say, obviously, if the soil is dry, I check the leaves.
Jade leaves should be very thick, very plump, and you should not be able to fold or bend
them.
So this one you can see just slightly, it can be slightly bent or folded.
So I'm not going to quite water this one yet.
And same with the golem jade, you should not be able to bend the leaves.
This one's okay.
It's well watered.
Don't have to water it for a little while.
And I know I just watered this one.
So you can see the leaf, I cannot bend it.
It's very rigid.
But when you come over to this one right here, you can see I can slightly fold it.
So this plant will need to be watered.
I just kind of go through all of them here.
This one will definitely need to be watered.
It's a little bit tougher because there's lots of stems in this one.
But the soil is bone dry.
And the weight of the pot is very light compared to a well watered plant.
So this one will need to be watered.
And this one, it's okay.
All these leaves are fairly rigid, very plump.
Even in the winter months, you shouldn't have to worry about over watering as long as you
have your succulents in the appropriate soil.
So I only use a cactus succulent mix for my plants.
It is formulated for these plants specifically.
And I think it's got like a higher sand content as well as some perlite mixed in the soil.
So it just makes for a well draining soil.
So I will water these, like I'll soak it until it comes out the bottom of the drain hole.
And again, until the pot is feeling much heavier.
So I'm just going to find a little spot where I can put the watering can in and just give
it a good soaking.
I'm just going to fill it up, if you can see it or not.
I'm giving it a lot of water, I'm just going to let that drain through until it comes out
the bottom.
It should come out fairly soon.
This one is pretty dry.
I don't remember the last time I watered it, so it'll probably need a good couple soakings.
So far, I've used half the can, a little more than half the can.
I can already feel the pot is significantly heavier.
Look at the little pups.
There's Zoe, she's not in many videos.
She's our old Shih Tzu and Oscar is now sleeping in her bed.
So she's probably a little bit upset about that.
So she's just going to stand there and I don't wait it out.
Oh, there's, she's looking at him.
Okay, might be a while.
Okay, so I'm going to give it one more good soaking here.
I'm going to put it back in the sunny spot.
So I've probably almost used the entire can for this small little pot and not much has
actually dripped out yet.
So that's telling me this was in need of a good thorough watering.
All the soil is kind of soaking that up right now.
I'm just going to leave it in this tray just to let all the water kind of drip out the
bottom and then I'll put it back in the south facing window.
Okay, so I brought the plant downstairs.
I'm going to, like I said, repot it in something a little bit larger.
So here's the pot that I picked out for this.
It's a little bit shallower, but it's quite a bit wider.
So it should provide a more solid base.
So this thing doesn't get so tippy and yeah, so I'm going to pot it up in this, but I'm
going to prune this one side right here.
You can see it's a little more lopsided, so you got a lot more branches kind of poking
out the top here.
So I want it a little bit more even, so it's like a nice round canopy and not so, I guess,
lopsided or uneven weight distribution on this side.
So I'm going to chop this up a little bit, going to cut away some of the damaged leaves
as well.
Whenever I do my pruning, I always kind of pre-plan where I'm going to make the cuts.
And like I've said in previous videos, you can manipulate a jade plant to branch out
in a certain way.
So if you want a branching, say like this way, instead of going the opposite way, what
you look for is the direction of the leaves.
So you can see right here, each little section or each little node will have two leaves,
whichever way the leaves are facing is, if you make the cut above that, that's where
it's going to branch out.
So you can see right here, the leaves are on the left and the right, and you can see
it gets a branch from those same directions.
So if you want a branch coming out on this side, as opposed to this way, you want to
make the cut just above there and you will get a branch on the same side as the leaves,
I guess is what I'm trying to say.
This thing got pretty beaten up.
You can see there's just a leaf hanging off there.
So you can just literally pluck a leaf off, put that off to the side.
I'm going to do this one here too.
This one's just hanging off.
You can propagate these, which I'll show you in a few minutes, just set them aside.
So I'm actually going to, I'm going to take this one off too, just so you can see.
Right here, you can see this leaf is facing this direction.
So I'm going to cut just above that leaf, just like that.
Even with this little cutting snipped off, it has drastically reduced the weight of this
branch.
So it will, I guess, not pull this plant over as much.
Here is another, actually, I'm going to do this one right here.
So this leaf is busted off here as well.
So I'm just going to take that off.
Now, because I made this cut, I'm going to get a branch on this side and this side, I'm
going to snip this one off, like right there, so that I now get branching from this spot
and this spot.
So I don't have two branches branching in the same direction.
They're going to kind of cross over each other and eventually fill in this area quite nicely.
And I probably should have, oops, I just cut that off.
Nevermind, that one just fell off.
I think it was already just hanging on there.
I'm not going to do a hard prune right now.
I'll probably do that in the spring.
I might cut back some of these branches quite aggressively, but just for right now, I'm
going to just, this is basically for weight reduction on one side.
So I'm just going to kind of look over this one here as well.
So I've decided what I think I'm going to do is just defoliate.
So I'm going to remove some of these leaves.
This will help drastically with weight reduction as well.
So I'm just using my hand, just kind of twisting them off.
You can use a set of pruning shears as well.
Wherever it branches out, I'm just going to take the leaves off.
Here's another little piece up here.
Again, set these aside.
I'm going to remove this one back here as well.
So like I said, this will drastically reduce the weight.
This little guy right here, I don't know if you can see it, but it stems off of a branch.
So I'm just going to pluck this off.
And I think that's what I'm going to do for now is just leave it intact.
I'm not going to prune it.
I like the structure here.
So it branches out right here and then it bifurcates right there.
So I have made a couple of prunes.
So that's basically what I'll do when the plant branches out like here.
I will cut it maybe one or two nodes above that,
just so it gets a nice full branch structure in time.
So yeah, I think I'm going to leave this alone for now.
Actually, I decided to cut the top off.
So I got a branch right here.
So it branches out this way.
I don't want a branch in the same direction.
So right here, I'm going to go one node above.
So it's going to branch out from here and here.
So I'm going to cut this little top off just like that.
And then this one up here,
I don't want this branch to branch out in the same direction as this one.
So I'm going to go one node above that.
So I will get a branch from this side and this side and one from here and here,
hopefully in a few weeks.
OK, so now the zoomed out portion,
you don't really see that one branch kind of hanging off to the side like it was before.
Like I said, in the springtime, I'll probably do a little bit more of a harder prune,
but I think this is good enough for now.
I'm just going to kind of rotate it.
You can see this branch, it's not as high.
It's still sticking out, but it's OK for now.
I think I'm going to leave the rest on it.
And I just want to show you guys just the trunk.
This thing is beefy.
So I get a lot of questions about how to get like woody stems
or how to get thick stems.
This all comes in time.
This plant was taken from a cutting, probably no larger than this,
about four or five years ago.
One way to get a tree structure like this is obviously from pruning and time.
This is the brown woody stem.
You can see the soft, pliable green stem right here.
And as this plant continues to grow, it will change to a more woody stem.
See if I can get a better picture.
So right there as well, you got a woody portion and a green, soft, pliable.
Eventually it will it will become this woody bark stem.
And they're absolutely gorgeous.
This is definitely one of my favorite plants that I have in my collection.
So when it tipped over last night, I was pretty worried.
All I heard was like a big thump.
You can still propagate these cuttings in winter.
It's no different than it would be in the summer.
So I just removed the lower leaves off a stem cutting like this.
I'll let it calc over for a day or two and then literally stick it in soil.
It will grow roots, but it might take a little bit longer
than say if you did it in the springtime.
I did propagate my first jade in water about a month ago,
maybe a little bit more. And there you go.
This is what jade plant water roots look like.
They're very thin. They're they're super fragile.
But yeah, this is the first time I've ever I can't get it back in there.
But this is the first time I've ever propagated a jade plant in water.
And honestly, it's probably just better to stick it in soil.
That way, you don't have to train these water roots to adjust
or transition to soil.
The plant will use the moisture from the leaves to basically root itself.
You don't even have to stick this in soil.
Honestly, you can just literally set it on a table and you'll probably notice
some roots poking through eventually just on its own.
But stick in soil.
You don't even have to water it that much.
In fact, I would not recommend watering it for for the first week or so,
because obviously there's no roots to soak up the water.
The plant will use all the moisture stored in the leaves to root itself.
That's how it, I guess, maintains or sustains itself
until it starts to root in soil.
But yeah, stick it in soil and then you're done.
For the leaves, you can just literally set them on top of again,
let them callous over, let them sit on top of a tray of soil like this.
So you can see right there, it's getting some little roots
that will search out into the soil by itself.
There is a little bit of new growth popping through the leaf.
So let it root itself.
Let the plant continue to grow.
And I got one right here that has been in this pot for a while.
So I just literally placed the leaf in there, didn't touch it.
It only gets water whenever I water the plant.
And you can see this new plant is still attached to the leaf.
The leaf is still thick.
I will usually let this kind of dry up and fall off.
But even right now, you can cut it off.
Where's my pruning shears?
Where's my pruners?
So you can just cut the leaf off as well.
I had a question about that the other day.
So it is well established in the soil.
Just snip it off like that.
I wouldn't snip it off with a plant smaller than this
because it still uses all the nutrients and moisture from this leaf.
Like it's still it's not flimsy or anything.
Maybe a little bit, but it's not squishy.
It's not rotten.
So that leaf was still good.
So you can cut it off if you don't like the look of it.
But I wouldn't cut it off with a plant any smaller than this one right here.
I got another couple on the back here as well.
This one's starting to branch out on its own.
So I'm going to pull this plant out, put it in something larger.
But can you repot plants in the winter?
The answer is yes.
But typically you want to wait till springtime just for the reason,
like I mentioned before, this is not growing as fast
and vigorous as it was before with the leaves and the branches.
And the same is true for the roots.
If you damage the roots while repotting this,
it's probably going to take much longer for that root system to repair itself
and to eventually, I guess, establish a large enough root system
for growth in the spring.
So if you can wait until springtime to repot a plant, that's the reason why.
At least I think so in my research.
So everything just grows much slower.
But if you need to, like if it's absolutely root bound,
if you need to change out the soil, it's just not absorbing the moisture
like it usually did.
Or if you're getting lots of leaf drop or something like that,
then by all means, take it out of the pot, put in something a little bit larger.
But just don't expect, you know, an explosion of new growth or anything like that.
So all I'm going to do is take this little knife
just lightly around the edges, try and loosen it up a little bit.
It's pretty tight in the pot, and I think it's root bound
because I can feel some roots crunching.
But that's OK, because jade plants, they don't like
or they don't mind being in smaller pots.
These are pretty well known for bonsai plants as well.
And those guys have them in like super shallow trays.
They just do like a root prune and root training.
Oh, this thing's in here good.
This might be a little more difficult than I thought.
I thought I was just going to be able to
just pull it out easily, but this one is it's in there.
So I'm just going to go around the pot sometimes with the terracotta pots.
They're quite porous, so I find a lot of the roots
will actually adhere to the sides of the pot.
So before I start yanking on this plant, I'm going to
make sure it's loosened enough so that I can just pull it out.
Oh, that thing's in there.
OK, starting to loosen it up a little bit.
If your plant isn't like super huge, you can usually
push it from the bottom as well through the little drain hole.
But yeah, that's not happening.
I got to go around the entire
side, loosen it up.
I am going to have some root damage,
so I have to be careful on how.
Oh, yeah, this thing is sticking right to the side.
I can feel it. Oh, my goodness.
Look at these roots.
These are all roots.
Holy cow.
OK, that was definitely root bound.
This is all roots. This is crazy.
It definitely stuck to the side of the pot.
Oh, yeah, that's super interesting.
OK, I don't know what I'm going to do yet with this.
Normally, I would try and loosen these roots up like this roots.
Yep. That's all roots.
That is so weird.
It's completely taken the shape of the pot, especially at the top here.
So, yeah, these are all roots.
So, yeah, like I was saying, I normally would loosen these up,
but you can see all these roots are super fine.
I'm definitely going to do the bottom.
So once again, my camera just shut off automatically.
I have no idea how much video I lost,
but I did take this little root
fabric thing off the side.
You can see there's some much larger roots there.
So, yeah, I think that's all I'm going to do
is just remove these very fine roots like this.
Oh, losing another leaf just off the side.
So there is a much larger root system underneath it.
These ones, I don't even know if they're alive anymore,
but I may do the same.
Just see if I can peel this back a little bit.
See if I can loosen up the bottom a little bit.
But like I was saying, most times I wouldn't disturb the roots.
I would just put it in the pot and let the roots kind of search out
on its own into the new soil.
But with this one being so root bound, I think I'm going to have to
at least loosen up a little bit of the bottom
and I'll try and not disturb as much as possible.
You can probably even just do it lightly like this.
There you go. That's all I'm going to do.
The rest of the soil, like it's not compact, you can see it's quite squishy.
OK, so I think that's all I'm going to do.
The plant will do the rest.
I'm going to put it in this pot, fill it up with some succulent soil,
and then this will be done.
This is so crazy.
I don't think I've ever seen a jade plant like this.
And I don't think I repotted this all too long ago.
Definitely last year.
You can see it's just stuck to the side.
This is crazy.
So you see the pots are pretty much the same size,
but this one is quite a bit wider, like I said.
So I'm just going to fill in the soil around the edges.
Here's the cactus and succulent mix that I'm using.
I'm not usually brand specific, like I don't really use Miracle-Gro anymore.
I just got to use up this bag.
So it's a nice airy mix.
So I'm just going to add soil, like I said, in kind of around the pot.
And then this project is completed.
So I'm just holding the plant down just because it wants to tip over.
Just making sure that it's in the center of the pot.
I'm not going to add any soil at the bottom.
I'm just going to allow these roots to, like I said, search out
and grow along the sides more.
So I'm just going to add soil along the sides
and then I'm just going to poke it down with the pencil here.
Just going to get some kind of evenly spaced around
just so this thing doesn't keep tipping over.
Once again, I filmed a bunch of footage and my camera cut out.
I am so glad I ordered a new camera and it actually came in the mail today.
But I filmed an entire couple of minutes of me explaining what I'm doing.
So I'll explain it again here.
I did have to place this a little bit different.
So this portion of the stem was kind of hanging off to the side a little bit.
So I straightened it out quite a bit.
And then I added a bunch of soil along the backside here and I poked it down.
I poked the soil down just so it's nice and snug.
So it is now supporting itself in this upright position.
Now, I'm simply just going to fill in the soil
just slightly below the line here.
I should also make mention that I am not going to be watering this plant right now.
This plant does not need water.
All the leaves are thick and plump.
So if I give it water right now, it's probably going to
remain a little bit more on the damp side.
So I don't want to give this plant root rot.
So I'm not going to water it until it needs water.
Otherwise, I'll just let the roots kind of heal and repair themselves.
So I think that's going to be pretty much it for this video.
If you have any comments or questions, please leave it down below.
Thanks for watching all my videos.
I appreciate the support. Take care, everyone. Bye.
