Transforming my Ram TRX!!

Automobile Identity
371 followers
#automobile #autos #cars #4wheels #luxurycar #sportcar #highspeedcar #testdrive #toyota #tesla #porsche #hyundai #rollsroyce #royall #suvs
Well, we've been gone for a while, but we are back.
Ladies and gentlemen, welcome back to the channel
and welcome back to vlog.
Now, I've been out of the country
for the last week and a half
on the other side of the world in Africa.
That's right, my mom and I flew out to Nairobi, Kenya.
We went out to the Masai Mara National Preserve,
meeting the people out there.
Amazing, amazing time.
We saw all the wildlife as well.
We rode in a hot air balloon.
We actually saw two leopards over Eastern Africa
from about a thousand feet up in an inflatable balloon.
Very cool experience, would recommend.
We saw lions, we saw elephants, we saw hippos.
Amazing time.
We're back here in Utah where it's snowing.
It was 85 degrees and sunny out in Kenya,
but the A12 Superfast, big project.
Widebody Super, big project.
We got the M2 as well, but today, the Ram TRX.
Finally, I've owned this truck for a long time.
I actually bought it in Alaska.
My mom and I flew up there.
We drove it up to Dead Horse, Alaska.
Every single year since my dad passed away,
I always want to go on a cool, memorable trip with my mom.
This year was Africa, Kenya, Nairobi, Kenya.
Amazing time.
The Ram TRX today is getting a makeover.
Now, when I say we're doing lots of mods,
the Ram TRX is getting a new breathing apparatus.
We're getting performance upgrades.
We got strength upgrades,
and we have illumination upgrades as well.
Unfortunately, we are being lambasted by snowflakes,
so I'm going to try not to act like a snowflake
and let's unbox.
Now, this is very important to note.
We can continue to breathe easy.
Our engine and warranty are protected.
We got the cold air intake from S&B.
We're talking an extra 23 horsepower,
and our airflow efficiency increased by 30%.
And of course, the other added bonus,
I guess you might say the real reason we're doing it,
the supercharger whine when this thing is installed.
Yes, sir.
It is way too cold to be doing this outside.
All right.
Look at this.
Yes, sir.
This is a little pre-rev.
Well, if you've watched the channel for a while,
you already know this,
but if you're new to the channel,
this is not a how-to channel.
This is the first time I've ever installed
a cold air intake on a Ram TRX.
One of the funniest features about the TRX,
you got the T-Rex eating the Raptor.
This, unfortunately, gets removed,
and it doesn't go back on.
Now, step one, we got to remove the factory intake,
and now I got to climb up into the engine bay
to remove the intake tube.
This is hard on the joints,
climbing up, jumping down, climbing up, jumping down.
Usually with the supercars, you have no room.
With the TRX, the accessibility is rather difficult.
Intake tube has been removed.
One thing I love about this cold air intake,
it uses a lot of the factory brackets
and a lot of the factory hardware.
And now we simply just transfer the brackets
to the new air intake.
The fit and finish on this kit is very impressive.
It feels OEM.
Now, the air filter of choice,
I went with the dry extendable.
I live in Utah.
The driving conditions are very dusty and very dry.
As this air filter gets dirty,
I can just clean it out with compressed air.
And now the final step is this cool little glass engine cover
to display the air filter.
I dig it.
Just so we get the maximum sound effects,
we're going to pop it into sport mode.
We're going to roll down the windows as well.
Cold air intake.
Oh, what?
That's actually a lot better than I imagined.
And for full effect, we got to open up the engine bay.
That's actually, that's insane.
The supercharger whine is so much more whiny.
I'm not sure what the adjective is for a supercharger whine,
but it's significant.
That's crazy.
I'm truly blown away by this new cold air intake,
no pun intended.
I'm going to try to climb up here.
It's very, very icy and I do not want to die,
but check this out.
You get like a little display case,
a little showroom for your air filter.
Very nice, very, very nice.
Honestly, this looks so much better
than the factory engine cover.
This is just a bunch of junky plastic.
The sound is incredible.
I paid about $700 for the cold air intake.
I did not get it sponsored.
I paid for it out of my own pocket, my own dime.
I dig it.
23 extra horsepower as well.
We're going to drive it later on in today's video.
It's a little icy, a little slippery.
We got more mods as well.
But this thing, this is sick.
For perspective, this is the junky engine cover
you get OEM from Ram.
This thing is garbage.
Ooh.
If you wanted to buy my stock engine cover
for the TRX, apologies.
It's crazy.
I'm so embarrassed.
It's really starting to snow here in Utah.
We're getting good accumulation
and the wind chill is very chilly.
We got to unbox.
I know you're asking yourself, why am I unboxing outside?
The echo is so bad in that garage
that it's impossible to film.
I built my dream garage and I can't...
It's blissful out though.
Living in Florida, California right now
seems kind of sort of boring.
As I mentioned in the last video,
this is not the knockoff stuff.
This is the real deal built in America.
I think the bumper is frozen in place.
It's so windy out here.
I'm not going to call this a failure per se,
but the bumper is frozen to the insulation foam.
I can't get it out.
I got to take it in the garage,
let it thaw out and I don't know.
And by the way, it's a new bumper for the TRX.
48 hours ago, I was photographing lions
in the Masai Mara in Kenya.
I can't even tell what this is.
And it is packed.
Oh, okay, okay, okay.
Ladies and gentlemen, we have the front bumper.
It is beautiful here.
Absolutely gorgeous.
Yep, winter finally arrived.
Couple months later.
Okay, let's chuck this thing back inside.
And you guys wonder why I can't get my garage floors clean.
Also, there's epoxy when your feet are wet.
It's very, very, very slippy.
So we got the rear bumper and we got the front bumper.
We got light bars galore as well.
So yes, the OEM bumper, front and back, is getting replaced.
Now, step one, we got to remove the factory bumper.
Well, the lower skid plate is removed.
It's hard to describe how bad my ears are ringing
from the echo of the power tools.
It just reverberates through.
Also, I am comprising a small collection of junk.
Now, the hardest part about removing this front bumper
is the wiring harness.
It's in a very difficult spot.
It's a big old honking wiring harness.
And it's got a bunch of tiny little clips
you can't really see.
Accessibility is very, very poorly.
But once you disconnect that,
then it's just a couple bigger bolts.
Remove those, and front bumper, she gone.
Yes, sir.
Oh, she's heavy.
The TRX has got to lose some weight.
This OEM bumper, I got to figure out what this weighs.
I'm very curious to figure out exactly
what this bumper weighs.
I weigh 177.8.
And me plus the bumper, 246 pounds.
Well, 246 minus 178, 68 pounds for the OEM bumper.
Well, the next step,
we got to remove the factory wiring harness
from the OEM bumper.
And we're going to transfer this over to the new bumper.
And luckily, we got a dream team now.
Yes, twice the muscle equals four times the work.
So I'm going to work on this side.
Sophie's going to work on that side.
Well, the next step, and after we do this,
there's officially no going back.
We got to cut off this bracket right here
and this bracket here.
Our tool of choice is going to be the angle grinder
and of course, safety, always safety.
One bracket, two brackets, three brackets,
and four brackets.
I also want to give a shout out to Sophia.
Thank you for the hoodie loan.
I've never looked better.
It fits snugly.
I got a bit of a muffin top.
Yeah, we got to cut weight.
178, that's a lot.
178, we got to slice and dice.
Give me the camera, you look so ridiculous.
Yeah.
I was just using the angle grinder.
You should be.
These got to come down.
There you go.
Okay, do I look better?
And of course, any time you cut any kind of metal,
we do not want it to rust.
So we're just going to paint on over it.
Whoever sprayed this foam had the time of their lives.
Getting this thing out is kind of sort of gross.
Exactly what we're doing next, I can't say for certain.
However, we got a whole lot of lights
and we are going to light up the Utah sky.
Check this baby out.
Ooh, that's nice looking.
My experience working with electrical
is basically abysmal.
Basically it doesn't exist, but check this baby out.
So effectively we've got four of these
and they're going to pop in kind of like so.
Now each Richard light has its own bracket.
You mount the light to the bracket
and then the bracket, you mount it to the bumper.
Now we're going to have way too many lights,
which is a good thing.
That's what we want.
You can never have too many lights.
Let's be honest, the functionality is important.
We definitely want to light up the sky on the trails,
but the look is kind of sort of where it's at.
This bumper weighs a fortune.
I should have put it on the scale.
It definitely weighs more than the OEM setup,
especially with the lights,
probably an additional 10, 15 pounds, give or take.
Now we're using the jack as leverage
just to get the bumper up on into place.
And then using the hardware, we can mount it to the truck.
You guys have no idea.
That's heavy.
Yeah, hydrate yourself.
This thing is so crazy heavy.
It is held on by this one bolt right now.
So we obviously got to do a lot of the hardware,
but goodness, that thing looks sick.
I think it looks amazing.
It looks amazing.
What?
TRX transformation day.
Impressive.
Just a little bit of persuasion
and the rear bumper fully removed.
Good morning.
Now, just like the front bumper,
we got to transfer all the wiring harnesses,
all the lights, the hitch mechanism,
as well as the license plate lights to the new bumper.
So I already pulled off the wiring harness right here.
And then we have this little hitch mechanism,
a couple of clips there.
We got lights here for the license plate too.
Well, I kind of sort of loosely forgot
to film any of it whatsoever,
but effectively we took all the old stuff
from the OEM bumper, put it on the new bumper.
So we have the electrical connection here for the hitch.
We have the license plate lights.
You can see right there and right there.
We have, of course, the new light bars there and there.
I guess they're more like spotlights.
We have the OEM wiring harness there.
And then Sophia has been working around the clock
cleaning up foam.
There's so much foam in here.
It is such a mess, but wow.
Trash cans are full.
We got recycling for days and days and days.
Look at this, we're stockpiled.
We need like 10 days of recycling to come to that.
We got more trash, oh goodness.
This garage is nothing short of a disaster.
Well, final steps are inbound.
We just got to mount up the license plate
and we are locked and loaded.
New bumper, that's so sick.
Now, if there's anybody who is looking
for stock Ram TRX parts, I got bumpers rear and front.
I don't have a wiring harness.
I got an air intake as well.
Let me know if you want them.
You can have them for pennies on the dollar.
We're going down to the back.
I see what you did there.
I almost lost my noggin right there.
Sophia saved the day and the TRX parts
go to the Batcave to die.
These new bumpers just turned out so sick.
I love the back bumper, but the front bumper especially,
those four lights right up front,
it just gives the truck such an aggressive feel.
That view in your rear view mirror, yes sir.
Now, I promise you guys, the cold air intake,
an extra 23 horsepower, which is a 3% power gain.
We're going to take the truck to Mexico
and see how she goes.
Now, not only are we testing the new cold air intake,
but we're also testing our work.
Will the bumpers fall off?
Will the front bumper fall off
and will we drive right on over it?
I am praying not.
We tightened it.
We torqued it.
I torqued it, right?
Did you torque it or did I?
You did it.
Let's hope and pray.
Yeah, yeah, yeah.
All right, if we lose the front bumper,
we're just going to end the video.
Now, to fully understand the power ramifications
of 23 extra horsepower,
there is a scientific method to the madness.
However, we also added new bumpers
that probably weigh a lot more.
So our power to weight ratio,
I'm guessing is effectively the same.
We're going to roll the windows down
just so you can hear the supercharger whine.
We're going to push this button that says launch.
That's right.
This is a Ram TRX with launch control.
Apply full throttle.
Okay, geez.
This thing accelerates like a freight train.
I'm not going to say the cold air intake
that I can actually feel the difference,
but it's got to be there.
This is by far and away the best truck money can buy.
I love this Ram TRX so much.
Now, the real question is in the comments below,
what do we do for more power upgrades?
Because, you know, 725 horsepower is just not enough.
We need more.
We could go twin turbo.
We could upgrade the supercharger kit.
Let me know what you think in the comments below.
I love the sound of the supercharger in a Hellcat,
but a twin turbo Hellcat would be quite extraordinary.
Well, there you guys have it.
The new and improved Ram TRX.
We got new bumpers.
We got new light bars and that cold air intake.
Now, what upgrades should we do to the TRX?
Let me know in the comments below.
We're finally back.
I know I was gone for a very, very long time.
I was out in Africa.
We're back.
We're better than ever on that bombshell.
Today's video is over.
