What were Sideswords? + A Review of Kvetun Armoury's Sidesword

Ancient Swords
6 followers
Nov 10, 2025
What are and were sideswords? What do we mean when we say sidesword? Also a review of Kvetun Armoury's sidesword simulator.
Hey folks, Matt Eaton here, scholar gladiatoria, and here's a sidesword. As promised in my previous
video talking about gymnasium savers, I said that I would talk about Covetin, link below,
Covetin's other products, and one of the other things that I got from them was a sidesword.
I've always fancied having a sidesword, so it was on my to-get list, and I saw they did pretty
nice ones for pretty good prices, so I ordered one, and I have not regretted it. It is a lovely thing.
I have used and handled other people's sideswords over the years.
For those of you who don't know, what is a sidesword? Well, a sidesword is essentially
a bit like a rapier, but it's a bit like an arming sword as well.
The sidesword itself is a modern term, it's not a period term. You do occasionally find texts from
the 16th century that refer to a spada de lata, or a sidesword, but they seem to just be talking
about the sword that you wear, which technically could be any kind of sword. In the modern world,
these have come to be known as sideswords, and to us, what they fill is the developmental gap
between the arming sword and the rapier. That is, they are a cut and thrust sword. This has a
particularly narrow blade, it has to be said, but sideswords can be much broader than this. They can
have more like a medieval arming sword blade, something like that. They have a cut and thrust
blade, and then they have a degree of complex hilt. Now they can indeed, you can get sideswords
which have very complex hilts, like full swept hilts. If they become a full basket, we tend to
know them by other names. For example, a schiavona, you could say, is a type of sidesword with a basket
hilt. But generally speaking, sideswords have finger rings as a minimum, pretty much. Sometimes
they have a knuckle bow, sometimes they have a side ring, sometimes they have a pair of side
rings, sometimes they have four side rings. So they tend to have what we call a sidesword, and
it's a very, very subjective term. They tend to have something like a simple rapier guard,
but not normally as complex as most rapiers are. And that's partly due to date. The majority of
sideswords, or at least what people think of as sideswords, are from the 16th century,
and they sort of started, they come about earlier than the rapier does. So the first sign of
sideswords really is actually in the 15th century. This is what a lot of people don't necessarily
realise, is that these finger rings actually started appearing in the middle of the 15th
century, in the middle of the 1400s. And in fact, the earliest appearance of just single finger
rings is right at the beginning of the 15th century, around the year 1400 in fact. And there's
a famous sword that's now in the Royal Armouries in Leeds, from the Alexandria Arsenal, that's an
Italian-made sword that has a single finger ring, and dates to about 1410 if I remember correctly.
So what we could call sideswords really are a development of the arming sword and had been
around since the 15th century, but when most people talk about sideswords, when they say they
do sidesword, they're mostly talking about 16th century Italian treatises, for example Morozzo,
Manciolino, Dallagocchi, these types of treatises. So the Kvitin sidesword, what do I think of it?
I think it's really great, okay? If I were personally choosing again, I'd probably ask
for a slightly broader blade, simply because it's a really narrow blade, and to me it's almost
more like a rapier blade. That being said, you've got to remember that a blunt sword is usually
narrower than its sharp equivalent would be for weight and weight distribution, because of course
if you imagine the blunt edges being forged out to sharp, you'd end up with a slightly
broader blade anyway. But even still, considering how narrow the blade is up here, it's almost
gone beyond being a cut-and-thrust sword to being a thrust-only sword really.
So it's a bit like a kind of proto-rapier in my mind, and I would prefer for a sidesword to
differentiate it from rapier. In fact, ironically my rapier actually has a slightly broader blade
in this, but I do have a particularly large rapier. I would, you know, to kind of characterize it as
a sidesword rather than a rapier, I think I would rather have a slightly broader blade on it.
But that's my personal taste, and what I would say is, despite the fact that I would prefer the
look of a broader blade and perhaps the feel of a broader blade, in terms of actually sparring and
fencing, having a narrower blade is maybe no bad thing. These can still hit pretty hard. These hit
not quite as hard as the sabers. Here's just one of the sabers for comparison. The sabers do hit
a little bit harder, but the fact that they don't hit that hard is kind of good for a training
weapon, isn't it? Because remember that when you're fencing you're not actually aiming to do damage
to the other person, you're aiming to hit them and hopefully not injure them. So actually having
a narrow blade maybe is no bad thing. The hilts are very, very nice. They're simple, utilitarian
for the price, I think they're really good. You see we've got turned out quillons here that provide a
little bit of extra protection to the wrist and to the inner line to the hand when you've turned the
weapon slightly. The finger rings are large enough for a glove such as a red dragon glove, just pull a
red dragon glove on here, so we can absolutely fit a red dragon glove in there without, and for me
this is important, without the hilt being overly large. One thing I really hate is that some HEMA
swords have overly massive looking hilts in order to fit a padded glove in and they end up looking
dog ugly, okay. Not to say all dogs are ugly but essentially this still keeps the look more or less
of a kind of correctly proportioned and sized small sword hilt but you can still use a padded
glove with it. The pommels are nice, the pommel's a disc pommel, okay, that's screwed on with a nut
so you can dismount it or you can change all the bits, you can clean them, you can do whatever you
want thanks to the nut. You could ask for it to be peened if you wanted but incidentally I've not
had to, none of the Kavitan weapons I've had to tighten since I got them, they've all remained
tight. That nut goes down slightly inside so it's actually got quite a lot of biting area. The
knuckle bow is really good, the hand protection, now let's just talk about this. So this is not a
criticism of the Kavitan sidesword, this is just a note really about sideswords. So I'm principally
a sabre fencer and I do some sword and buckler, some longsword, some spear, some various things.
I don't really do sidesword but I do do some sword and buckler. Now with a buckler no problem at all
however using a single sidesword I kind of make it up as I go along and I have been to some
marozzo classes over the years so I do know some basics, I know the guards and I know the cuts and
I know the basics of bolognese sidesword but I'm not a bolognese sidesword fencer. So when I come
to use a sidesword I just apply the knowledge I have from other systems, a bit of rapier,
bit of sabre, bit of longsword, bit of arming sword and I apply that to use of this and it
works okay, works fairly well, you can use these kind of like a sabre. There are two things,
amusing things kind of, that I discovered. So in the way that I used the sidesword there were two
errors. Number one, the rear quillon gets caught on stuff. Now I'm used to moving sabres in certain
ways and when I did that with this I actually managed to connect the rear quillon to a part
of my fencing jacket which in the middle of a fencing bout is really quite not embarrassing,
probably couldn't be embarrassing to some people, I just thought it was really funny.
So I went to make a moulinet so I think I guarded and I brought the sword around here
and it basically got caught in the in the fabric of my jacket. I was like
so that's one thing is that sideswords are not the same as sabres, they have guards okay,
they have quillons. But the second thing was a little bit more painful lesson and that is to
remember you don't have a knot with this one anyway, you don't have really any side protection
here and so one of the blows, I think it probably bounced off the blade, came down and caught me
right on the finger there. Now I was wearing my good old red dragon gloves, actually not that one
that's a new one, but my old red dragon gloves which are a bit more flexible and it protected
my finger but it did hurt okay, so you've got to wear good gloves with these especially if you're
sticking the finger over the guard as you're supposed to do with a sidesword and that finger
is vulnerable. Now there is a few ways, a few things you could do about that. Number one you
could just glue on or attach on some extra protection for that index finger there or you
could get you could get a side guard okay, you could get a type of hilt that has a side ring
but really I mean, it's the second time I've hit that light, although that ring there provides a
bit of extra protection to the blade coming directly down towards the finger it's not that
much and it's quite easy for a blade to completely bypass that and hit you in the finger anyway
if you're not very good at doing sidesword like I'm not. So there we go really just to be aware
that you don't have as much hand protection with the sidesword as you do with a sabre,
like you know newsflash, but in terms of the quality absolutely great. I will full disclosure
I very slightly bent this blade hitting one quite hard and they put a parry in and I my edge
alignment was bad and the sword twisted in my grip slightly and very slightly bent the blade
I straightened it again under my foot no problem at all it was just a very very slight curve to
one side I dragged it through under my foot and it was straight again okay. One thing about straight
blades as opposed to curved sabre blades is that straight blades are easier to bend than curved
blades partly by virtue of the fact it's easier for the blade on impact to roll that seems to
happen less with sabres or curved blades okay so but in thrusts I mean I've thrust with this I've
hit bucklers with this I've done hit masks with this all this kind of stuff no problems at all
good edge durability no edge damage blades being great everything stays tight in the hilt there's
been no serious damage to the guard the guard's comfortable it's big enough for a padded glove
the grip is all secure and tight no movement there whatsoever it's a nice shape this bulge here fits
very nicely so those two fingers go above the bulge the little finger below the bulge and that
your index finger over the quill on over the front quill on and through the finger ring so great I
highly recommend Kveten side swords in fact of production you know fairly cheap fairly affordable
side swords I can't think who can compare with them actually I mean I do know other sides I'm
not going to mention other specific makes because I don't think that's fair because I might mention
some and not others but I do know other people using other makes for side sword and I've got to
say for a kind of around 200 pound entry level side sword that will probably last you for years
and years Kveten really really good option link below and cheers for watching bye folks
thanks for watching please subscribe we've got extra videos on Patreon
t-shirts on Spreadshirt and I hope to see you for the next video
