How to Crochet Lace Scarf with Flowers Designs, Mile a Minute, Crochet Video Tutorial

Handicraft products
43 followers
2 Video Views·Nov 10, 2025
Today I will show you how to make this lacy scarf with a beautiful flower design.
For my scarf I used one skein of Caron Simply Soft yarn and a hook size G 4.25 mm.
My scarf came out about 59 inches long and 9 inches wide.
The scarf is made in stripes which are then connected together as you go.
I believe this technique is called mile a minute.
I made my scarf with 4 stripes but you can make yours as wide as you wish.
If you would like to add fringe to your scarf,
the chain spaces at the end of each stripe is a perfect space for it.
And now I will make a small sample to show you how this stitch and this pattern work.
I start with 3 chains.
One, two, three.
Then into the third chain from the hook or the very first chain that I made
I make a double crochet.
Next I make 3 chains.
One, two, three.
And now I will work 2 double crochets finished together
into these 2 loops of the chain and double crochet that I just made.
So yarn over and I pass my hook through the 2 loops like this.
I draw up a loop and I make my first double crochet but I don't finish it.
Then yarn over again and I pass my hook through the same 2 loops again like this.
And I make a second double crochet but I don't finish it.
And now I finish all these 2 double crochets and chain all together.
Now again 3 chains.
One, two, three.
Yarn over and I pass the hook now through 3 loops like this.
I draw up a loop and I make a double crochet and I finish it.
So far my pattern goes like this.
Chain and a double crochet and then chain and 2 double crochets finished together.
Chain and a double crochet and next I will make chain and 2 double crochets finished together.
Chain 3, yarn over, through the 2 loops I pass my hook, draw up a loop
and I don't finish my double crochet and I make another one.
Now I finish them all together.
So again let's take a look how it goes.
Chain and 1 double crochet, chain and 2 double crochets finished together.
And this is how I am going to continue crocheting.
Chain and 1 double crochet.
Then chain and 2 double crochets finished together.
One, two.
And now I need to continue crocheting this way
until I have a piece as long as I want my scarf to be.
So for the scarf that I made, I made this piece about 58 inches long.
Here I made my stripe a bit longer and if we count these, well let's call them clusters,
I have 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 of them.
And for the scarf that I made I had 82.
When you make your stripe, you start with chain and 1 double crochet
but you must end with chain and 2 double crochets.
That's very important.
I also recommend that once you made this long piece,
you check that it alternates 2, 3, 2, 3, 2, 3 all the way across
because that's very important too.
Now I will be continuing crocheting into this side of my crochet piece
and I will be inserting the hook in between the chain and a double crochet right here.
So that's where the hook will go when I continue crocheting.
But first I make 6 chains.
1, 2, 3, 4, 5, 6.
Next yarn over and I insert the hook into the space between the chain and the double crochet
just like I mentioned before.
I make a double crochet but I don't finish it.
I make a second double crochet and I don't finish it
and I make a third double crochet and now I finish them all together.
So basically I made a 3 double crochet cluster.
Next I will be skipping this chain and 2 double crochets
and I will be working into the space in between chain and double crochet
just like I did over here.
So into this space I make a 3 double crochet cluster.
So I make a first double crochet, I don't finish it,
my second double crochet and my third double crochet.
Now I finish them all together.
Next I make 6 chains.
1, 2, 3, 4, 5, 6 and into the same space where I made my first cluster I make another cluster.
1 double crochet, I don't finish it,
2 and 3.
Now again I skip this chain and 2 double crochets
and I will be working into the space in between chain and 1 double crochet.
I make a cluster.
Then I make 6 chains.
1, 2, 3, 4, 5, 6 and into the same space I make another cluster.
1, 2, 3.
And now I continue crocheting this way all the way across.
A cluster, 6 chains and another cluster.
Here I am almost at the end of my crochet piece,
but before I continue I should hide this yarn tail.
And I use a smaller size hook just because it's more convenient for me.
I should mark this row as the right side, so I'm going to put a small marker over there.
And now I'm going to turn my work and I make 6 chains.
1, 2, 3, 4, 5, 6 and then into the same space where the 2 clusters were made
I will make another cluster.
1, 2, 3.
And now I can continue crocheting this way.
I make 6 chains.
1, 2, 3, 4, 5, 6 and into the same chain I make another cluster.
1, 2, 3.
So here into the last space in between chain and a double crochet I made 4 clusters.
1, 2, 3, 4 and they are all separated by 6 chains.
I'm skipping this cluster and I will be working into the space where the clusters were made.
I make a new cluster.
1, 2, 3.
I make 6 chains.
1, 2, 3, 4, 5, 6 and into the same space I make another cluster.
1, 2, 3.
And again I skip the next cluster
and I will be working into the space where the clusters were made.
I make a cluster.
1, 2, 3.
And into the same space I make another cluster.
1, 2, 3.
And into the same space I make another cluster.
1, 2, 3.
And that's how I continue crocheting.
Cluster, 6 chains,
and cluster into the same space.
Here I am at the end and into the last space I work a cluster,
then 6 chains and another cluster.
Now I'm turning my work 90 degrees and I make 6 more chains.
1, 2, 3, 4, 5, 6.
And I'm going to join with a slip stitch into the top of the very first cluster.
And now I'm going to fasten off.
And I use a smaller size hook to hide the yarn tail.
And here my first strip is ready.
I start the second one the same way I made the first one.
Here is my second piece and I just counted all the clusters.
I have 16 just the way I had in the first piece right here.
And one more thing that I already mentioned but I'll do it again
is that it's important to check that the clusters alternate.
3, 2, 3, 2, 3, 2 all the way across
because it's very easy to make a mistake
and then when you're working and you get to that part
it's not gonna work out and you'll have to undo all your work.
And now that I checked everything I can continue crocheting my second stripe.
And the first half of it I will crochet exactly the way I did the first one.
Here I completed one side and into the last space I made 3 clusters separated by 6 chains.
Now I'm going to turn my work and I will be crocheting along this side
and I will be joining my second strip to the first one.
Instead of making 6 chains the way I did before I make only 3.
1, 2, 3.
Now I take my first strip and I fold it together with the second one.
And pay attention to how I fold it.
This is the right side of the first one and this is the right side of the second one.
So the sides that are facing each other are the wrong sides of my work.
And now that my strips are folded I make a single crochet
into the chain 6 space of the first strip.
Just like this.
Then I make 3 chains.
1, 2, 3.
And into the space of the first strip where the clusters were made I make another cluster.
1, 2, 3.
So now if I unfold my work now it's connected over here.
I make a cluster into the next space.
I skip this cluster and make a cluster over here.
1, 2, 3.
Now instead of making 6 chains I make only 3.
And I make a single crochet.
I fold my work and I make a single crochet into the chain space of the first strip.
Then 3 chains and back to the second strip into this space I make another cluster.
1, 2, 3.
And this is how my strips are connected.
And I continue crocheting this way.
I skip this cluster over here.
I make another cluster.
1, 2, 3.
3 chains.
1, 2, 3.
I fold my work and into the chain 6 space of the first strip I make a single crochet.
Then 3 chains.
And back to my second strip I make a cluster.
And I continue crocheting this way connecting my strips together.
Here I crocheted across connecting my two strips together.
And here I am at the end.
And all I need to do here is to make 6 chains.
1, 2, 3, 4, 5, 6.
And join with a slip stitch to the top of the very first cluster.
And I fasten off.
I will hide this yarn tail and continue adding more strips.
And this is how this stitch and this pattern work.
You just continue adding strips until you have your scarf as wide as you want it to be.
