How to make a Christmas wreath | The RHS

Arts and Design
68 followers
#art #decorate #design #diydecoration #sculpture #ceramic
A step-by-step guide to create a beautiful Christmas wreath using a variety of cuttings foraged from your gardens, with Helen Round, Garden Manager at RHS Garden Rosemoor in Devon.
Want to try your hand at an alternative Christmas arrangement? Watch our tutorial to make a living wreath with succulent plants: • How to Make a Christmas Wreath | With Tony...
Hi, my name's Helen and we're here at Rosemoor
and today we're going to show you how to make a Christmas wreath.
So when you're looking for foliage for a wreath, obviously hopefully you can cut it from your
garden, you're looking for evergreens because evergreens last longer when they're cut because
things like the hollies have got a very natural thick cuticle to the leaf so it actually stops
water loss and obviously the wreath could be on your door for maybe two weeks before Christmas
and because you want it to last through the Christmas period, evergreens are the ideal
choice. So while I've been working in the garden, I've just honed in on a few things that I could
use for this wreath. This holly here, this is Ilex aquifolium pyramidalis and this is really good for
a smaller garden because as the name said it's pyramid, it's very upright and narrow in growth.
We're very lucky at the minute because this is absolutely full of berries but unfortunately by
the time we're coming up to Christmas the birds will probably have taken those. I would rather
the birds take them actually than take them into the house but it doesn't matter because the holly
itself is still with the nice shiny leaves good enough to use without the berries so it's a bit
of luck really whether come Christmas there's still any berries on and then also you need what
I would call some conifer and this is just what people can use for hedging which is a Lawson
Cypress. So I was thinking that most people may have some of this in their garden if they've got
a conifer hedge and this again evergreen shiny foliage and the texture of that just complements
the more simple leaves of the holly and then just as what we would call a filler
again common garden plant is Pitosporum, again evergreen, again smaller leaves than the
than the holly so I think those three types of foliage will contrast well for the wreath.
So then you have to decide obviously what size wreath you want to make and that can depend
obviously on the size of your door or where you want to hang it and also the type of wreath ring
that you want to use. Over the last few years it's gone more into more natural products so this is
like a vine that's been made into a wreath ring and the size of this is 30 centimeters or 12
inches. This here is a metal wreath ring which you can buy from any florist and this one is
slightly bigger so if you want a bit more of an impressive bigger wreath this one here is 14 inches
or 35 centimeters or if you've got some willow in your garden and you fancy having a go you can
twist willow around make a ring to any size this is this is a much smaller one. So today what I'm
going to do is I'm going to use the natural wreath ring so what you need to do is you need to use
this foliage and what we're aiming to do is make up these bunches of foliage which we will then
attach onto the ring. So what I'll do is I'll show you how to make up a couple of bunches and
then I've made some of these earlier so that I can then start tying them on. So it's quite
straightforward so again from the florist or garden center you need to get some real wire
and it needs to be pliable real wire but if you go into the florist they'll tell you exactly what
you need for for making a wreath and then you need to then select your foliage. Now I'm just
going to use these snips and yeah so I'm cutting my bits of foliage and then generally what I
tend to do is I make each bunch pretty similar so that the the wreath just looks uniform
all the way around but again it's it's a personal thing and you know if you want to do every bunch
different that's absolutely fine. So once you've got your bunch there and your wire what you need
to do is you need to make a small hook in the wire and then you take your bunch and then you lay the
hook alongside the stems there and then you just bind round tightly and just leave a bit of a tail
on that and this is an old pair of snips I wouldn't use my brand new secateurs to cut that
wire this is just an old pair an old pair of scissors will do. You've just got to make sure
that that is strongly on the wire so that's your bunch. I'll just do one more just to make sure that
we can see exactly what we're doing so a bit of the holly then a bit of the Lawson cypress
and a bit of the pittosporum so I just strip off those bottom few leaves put those together
so I've got my nice bunch like that again with my real wire make my hook lay that onto the stem
and then twist around tightly. Obviously as this is hanging on the door the material will start
drying out so it is really important to do that tightly so that it doesn't start falling to pieces
so once you've got all your bunches prepared like I did these ones earlier then we can start tying
them onto the wreath ring so I've decided I'm going to use the the natural material
so first thing you have to do is you have to secure your real wire onto your wreath ring
so you just need to make sure that's secure so once that's secure then we can start tying on
the bunches so you basically lay that onto the ring I'm going to start at the top here
and then what you have to do is you then wind the wire around over the top
of the stems until again you need to do it tightly
and then you go for your second bunch I've put I haven't put berries in all of the bunches
so I think sometimes you can overdo the colour and as you can see we're not using anything
I'm not going to use anything plastic in this you just got to make sure that it is tight on there
so you just keep winding on your bunches making sure
that they're nice and tight and then when you get back to where you started you just got to put your
last bunch in and just try and make that look so you can't see basically where you started
so you just slip that in underneath your first one this is just a little difficult bit here
again just pull that wire tight I think we're about there so when I was working in the garden
and I was thinking of making a wreath under one of the conifers this cryptomeria japonica
there was these lovely brown bits that had fallen off from the tree so I just thought that would
complement the the greens and just lift it a bit if you haven't got anything like this in the garden
it's an ideal time now to go around and you can always just collect this is some nice brown leaves
this is an oak leaf and you can do exactly the same with the oak leaves just wire them like you
the individual bunches and then you could use those in there instead of the brown conifer there
and it just gives you the color contrasts so once we've got to the finish and we've got our last
bunch in just check that you're happy with it and then we just need to just finish off that wire so
that we can take the reel away and just secure it so again as I said before I'm just using these
old snips to cut the wire and then just secure that wire so that it's safe
so that's the basic wreath done and as I say just make sure it looks balanced
if there's a bit that you don't like the look of you can just snip that bit off
so that's the finish and then you can also add other bits if you'd like to
so these are some weather cones again that we've picked up from one of the scots pine tree
in the garden here and I've just wired these so this is really easy because the the pine cone
if you collect a scots pine or any pine cone usually they're closed up but if you put them
somewhere warm and dry they will then open and then that makes it really easy to to wire those
so yeah you just basically go in between the scales and and just wrap around the wire
and then just give it a tug to make sure it's secure and then again if you want to you can
then wire these push them through I put that that way so yeah if you if you want to add cones
I'm not going to add cones to this because I just like it as it is but if not you can push the cone
through and secure the cone onto the wreath and quite often it's nice sometimes to maybe do two
or three in in a group and maybe they say odd numbers looks best so you could have three here
three and three so three groups of three spread around the wreath if you'd like to use some cones
just to add that extra bit to it so when it's time to hang up your your wreath you just need
to again you can use the same wire or you can use string and then you just need to tie it around the
the wreath and secure it so I'm going to use the wire here and then you can just hang that up so
it's a good time of year now to be looking in the garden when you're cutting things back to see if
there's anything you can use if you're going to make a Christmas wreath this year and yeah good
luck and happy Christmas
