How do North America's biggest earthmovers work? We visit Saskatchewan's largest coal mine to give you an inside look at the draglines that move millions of cubic yards of dirt.
The Estevan Mine employs 5 walking draglines to remove overburden and expose lignite coal seams. The massive earthmovers can scoop up 100 cubic yards per bucket and are fully electric powered drawing up to 10MW of power!
In this documentary style video you will learn: History of Coal Mining in Saskatchewan How Draglines Work What the inside of a dragline looks like The crew it takes to operate a dragline How Coal is Mined in Saskatchewan
This time on the vlog we are showing you North America's biggest earth movers,
the drag lines here in Estevan, Saskatchewan at Westmoreland's Estevan Mine. So stay tuned to learn
all about how these machines work, how they dig cuts, the engineering team behind them,
the equipment operators that run them, and more on this episode of the vlog.
Welcome to the Estevan Mine, Saskatchewan's largest open pit coal mine
and Westmoreland Mining's flagship operation located in Estevan, Saskatchewan. The mine
extracts lignite coal, supplying it to nearby boundary dam and shand power generating stations
to create baseload electricity for Saskatchewan and beyond. The mine employs five walking drag
lines. We have two Besirus Erie 1570Ws named The Queen and The Badger respectively. We have one
2570W named Big Lou, one Marion 8750 named The Estevan Eagle, and a P&H 9020B drag line
which to this day remains unnamed. Mining coal in Estevan dates back to the year 1891 when the
first coal mine was established in Roche Percy. Today over four million tons of lignite coal is
produced from multiple active pits across the 20,000 plus acre footprint in the Estevan Mine.
The Estevan Mine mines three main coal seams, Roche Percy, Surus, and Estevan Main seam. With
coal buried deep beneath the earth's surface, the question remains how do they move millions of
cubic yards of overburden to get to the coal. Our journey today starts in the engineering department
at the main site office where we meet with the team of people who support the drag lines in the
field by creating mine plans, design files for the drag lines to dig to, and scheduling for the drag
lines. Well before the drag line begins to dig, boreholes are drilled across the property to
identify depth of overburden, consistency of coal, and the quality of coal in the area. This data is
then combined with drone surveys to build mining plans for the drag line through the engineers
software packages. The engineers on site use a software called Dig 3D to build both a drag
line mining schedule and build design files for the drag line to dig to. These design files are
then uploaded to Pegasus inside the drag line so the operator can see where he's digging and stick
to the plan. So before they had 3D dig, this is what they used to illustrate the process and show
operators and plans. So you've got your existing box cut, you've got your new box cut, you got your
coal down there, spoil piles, you've got your drag line replica here, you've got your power cable
there, spoil piles here, you got a little looks like maybe a tan up there or something, but this is
what they use to to kind of plan and illustrate the mining process before. So this is the drone they
use to do scans in the field. So it's made by Wingtra and they'll set it up and fly it and get
3D contours. Based on what they've planned and what they've achieved, they can reconcile between that.
They can get volumes calculated from the actual flights. So they put that into PIX4D and they can
actually see their volumes and reconcile against what they plan to move, the amount of earth they
plan and what they've got. And it also helps for future scheduling to see the layout of the
land and where the drag line is going to go. So a little bit more technology that goes into
helping the drag lines dig than a lot of people think. So this would be an example of the plans
they build here in the engineering department. But they fly that drone, that fixed-wing drone,
they can get a 3D contour or bird's-eye view of the land. They can actually overlay their plans
on it. So down here we've got the dig lines, the drag line, the pad lines, the chop line,
which they're going to set their bucket in and establish that high wall. Over here we've got
plans for dozers. We've got arrows showing push lines. So everything is planned out. There's more
to it than just sending the machines out there and just digging. But everything is on a week,
monthly, quarterly basis is planned out. So a lot more goes into mining here in Estevan than a lot
of people think. There's a lot of technology and people behind the machines you see working in the
they're entirely electric. So this four-inch cable, this four-inch orange cable here,
powers that drag line. So this is 25,000 volts and the drag line can draw up to 10 megawatts of
power, which is the equivalent power consumption of the city of Moose Jaw. And because they have
more than one drag line out here, you can do the math, they draw quite a bit of power. So this cable
runs to the mine's electrical grid and that comes from the nearby power generating stations from
Sask Power. So the drag line uncovers the coal, the coal's mined, the coal is burned or consumed,
generates electricity, and that very electricity it generates comes back and powers the drag line.
So you may ask why is it painted orange? Well, that's for visibility. So these are usually very
well demarcated so that no one's going to drive over it, run over it, but it's orange so that you
can identify it on the ground, you can see it on the ground as a safety factor. Just a big extension
cord, basically like your home vacuum except supersized. There's what the inside of a drag
line cable looks like. 25,000 volts through that. A lot of copper. This one's been damaged and
been taken out of service, but it's a heavy cable.
So each drag line has its own dozer assigned to it. Sometimes it's a 10, sometimes it's a D11.
The dozer's job is basically to support the drag line operations, so that includes
ripping hard ground, cleaning off coal, pushing off what are called rolls. If the drag line pulls
material too close towards it when it's doing like a back cut or something, the dozer will come in
and push those off. The dozer also helps with any remaining overburden removal, prepping the pad to
allow the drag line to advance in the cut. So the dozer and the operator is a critical piece to
allowing that machine to be productive. So you can see how all these pieces like the dozer,
the engineering team, the maintenance team, dewatering teams, all those people play into
the success of these earthmovers being productive. So this drag line, the PH9020, has got a D10T
assigned to it. The 9020 was delivered in 1999. It actually took two years to build it, so it's the
newest drag line. It weighs 13,036,000 pounds, so by no means the heaviest drag line on the site, but
definitely a heavy hitter by any means. The boom is 340 feet long. It can reach over 200 feet deep.
It can stack up to 158 feet high on the spoil piles. It's currently running a 100 cubic yard
ESCO profile bucket. So they run a fleet of buckets out here, so they always have a bucket
available for the machine. So at the base of the machine, from outside of the shoe to outside of
the shoe, the walking shoes, it's 107 feet wide. The tub it sits on is 73 feet in diameter and it
exerts about 30 psi of ground pressure on that tub. So you think about 13 million pounds sitting
on a 73 foot diameter tub. It's a very heavy machine. How do these massive drag lines actually
dig a cut? The initial cut of a new pit or the extension of an existing pit is called a box cut.
That's where virgin ground is on both sides. Subsequent cuts are called turnover cuts, as
pictured here, where the drag line digs virgin ground and casts it into the open hole of a
previous cut. The mining sequence of a drag line can be broken down into a few key steps.
The first step is called mud out, where the drag line digs a concave hole in the pit floor of the
adjacent mined out pit. This method does one of two things. First, the dirt from the mud out is used in
what's called a back post, creating a vertical pile of dirt. The second is it creates a concave hole
in the pit floor, which helps lock in overburden piles on the pit floor, as opposed to just leaving
it flat and piling tons of overburden on top, which may lead to instability. The second step is digging
what's called the key cut. This establishes the high wall and allows it to be sloped at a safe
60 degree angle instead of vertical. Material from the key cut is then piled in the mud out,
forming a second or front post. These two piles of dirt, or cones of dirt, form the barrier in which
the remainder of the overburden is spoiled behind. After the key cut, the drag line will spin around
and dig what's called a back cut. This back cut allows for not only swing room, but also advances
the pad behind the drag line, because as you'll see, drag lines walk backwards. After the back
cut is established, the drag line then swings around and moves in on the prime, or the face cut,
which is the remainder of the block of dirt from which the drag line was excavated.
This dirt is then spoiled, or stowed away behind the existing front and back posts, and forms the
spoil pile. After this is complete, the coal is exposed and the process is repeated over again
until enough coal is exposed that the operations team can move in and mine the coal.
So this is the operator's chair here in the P&H 9020. So the operator focuses on running the drag
line. The oiler focuses on doing his checks. The oiler also helps move the drag line, so if they
need to mine the cable with the tractor, he'll do that. And then you've got your dozer operator down
there. He's currently pushing off some rolls, so you basically have three people who run this
machine. Your operator sits here and runs it. Oiler does his checks, makes sure everything's
working in the house, helps move the machine, and your cat operator. So typically the oiler will,
when he's not doing that, sometimes he'll get some time in the seat to get some experience,
because at the mine here you need about 300 hours to get signed off on the drag lines.
Each drag line is fitted with Pegasus. It's basically just a 3D GPS-guided navigation
system for the drag lines. When you're out here running these big things, it's kind of hard to see
without survey. It'd be hard to see where your coal is, where your bench is, where your chop line is. So
the engineers, which we visited at the main site, they'll send out design files for each pit and
each drag line, and that gets loaded into Pegasus here. So you can see you've got your chop line,
which is where they're going to cut a high wall. You've got where your coal is going to be. You've
also got where your pad is going to be. You've also got a bit of an offset. So they, here at
Westermann, they do a bit of an offset between where the coal is in the bottom of the pit and
where their spoil piles are, because they want to have a bit of room there so that they can mine
all the coal. They don't lose any coal with the spoil being right up tight. So everything the
drag line does is monitored through here, and this also reports things like production time, so
digging time, building pad, mud out, key cut, downtime, rain events, so weather events, downtime.
It also records bucket weight, so they can do daily production summaries. It'll give you daily
or weekly BCM summaries, or bulk cubic meter, so how they can tell how much is moving. It'll also
monitor stress indexes on the boom. So everything that this drag line experiences and does runs
through Pegasus. So as you can see, there's a lot of room in the drag lines. We have a full kitchen
complete with fridge, microwave, coffee maker, toaster, sink, eating area, locker room back there,
and then the cab, quite spacious. We've got the operator's seat, and there's a jump seat or a
trainer seat, where maybe the oiler or the dozer hand can sit. But as you can see, besides your
average condominium building, we haven't even gone into the house yet. But this is all the
big earth movers walk? Well, they're walking drag lines, so they effectively walk themselves. Like
a seal would drag itself across a beach. There's two feet on either side of that drag line, and he
literally picks himself up just the back of the tub, and he'll drag himself backwards. So he's
currently walking from the mud out. He's walking 17 steps backwards to start the face cut. So the
drag line takes seven foot steps every 60 seconds, roughly, and those feet are 17 feet wide by 70 foot
long. So as he's walking, the oiler's in a little tractor, and he's minding the cable. So he's
pulling the cable around and making sure it's not going to get caught underneath the drag line
as the drag line walks backwards. So not a fast process to move. Again, seven foot steps every
60 seconds. So not fast, but that's how those big earth movers move around. It's just like
taking little steps, dragging himself across the prairie. So part of the mining process here, after
the cover soil or topsoil has been removed, they actually blast in this particular area of the mine.
There's a lot of rock here, so they use a down-the-hole hammer terex drill, which will drill four-inch
blast holes. They'll load them with explosives and blast. So what that does is that helps the drag
line begin establishing its cut. Because the hardest part of the drag line establishing the
cut is when it has to shear in or chop the actual virgin ground, blasting it allows the rock to be
a bit broken up, so it makes it a bit easier for the drag line to dig. Again, this is all
making the drag line as productive as possible, and drilling and blasting in this particular area
of the mine is one way they accomplish that. And we're actually going to get to see a blast today,
which I'm pretty stoked about. Today's blast was 17 holes drilled approximately 80 feet deep,
loaded each with 250 kilograms of explosives per hole, for a total of roughly 4,200 kilograms
of explosives. Here's the blast.
After the drag line removes overburden, it's time to mine the coal. In this area of the mine,
they mine the Estevan Main Seam. Estevan Main splits into four main seams further south called
D, C, B, and A Seam from the top down. These lignite coal seams are split by what is called
parting, a thin layer of mudstone or shale that separates coal beds. After the top seam,
or D seam, has been mined, a Cat 993K and Komatsu PC-1250 mine the parting layer between D and C
seams to expose the lower C seam below, which is mined by another Cat 993K and fleet of Cat 777
coal haulers in the same pit. This process is basically repeated until the final A seam is
out. From there, the pit is filled and the land is reclaimed.
That completes our tour of Westmoreland's Estevan Mine. Big thank you to Westmoreland
Mining for having us out. If you want to learn more about Westmoreland or you're interested in
a career at the Estevan Mine, I will leave the link to their website down below. You can check
that out. They're always looking for equipment operators, millwrights, electricians, in-house
staffs like technical services, engineering, supervisory, all those sort of roles. So big
thank you to Westmoreland Mining for having us out. It's much appreciated. I hope you got some
insight into how they mine coal here, how the drag lines operate, and how they maintain them.
So thanks again. We'll see you on the next episode.