Adding 18 Hydrangeas to the Entryway Flowerbed & Cleaning Rusted Pruners! ๐ฟ๐๐งผ // Garden Answer

Flower Growing Profession
24 followers
41 Video ViewsยทNov 7, 2025
Hey guys, how's it going?
So we've got two projects for
today. First off, we got a hold of
a bunch of firelight hydrangeas.
They look awesome.
We're going to get those planted up
in our front flower bed.
And second, remember the
falcos that I lost last week when
we were doing some cleanup?
Aaron found them and they are
looking rough.
I looked for these so hard.
I looked for them everywhere.
I mean, I walked the whole area
several times.
We drove it several times and I
figured having the red handles,
it's usually very helpful.
You can see them a little bit
easier than darker colored
handled pruners.
But I just couldn't find them.
So it was a couple of days later.
We were out on a garden stroll in
the evening and Aaron stopped in
the grass and he's like, hey,
I took a picture exactly where he
was when he found them.
They were embedded down in the
lawn, like so much so that he
could barely, he caught a glimpse
of the red, but could barely see
any of it. So he used his shoe and
kind of flipped him up out of the
grass. And that's when I took the
picture of it.
I'm like, stop.
Just so I can show everybody where
they ended up.
So they were subjected to
several rainstorms, a lot of water
and they're all rusted.
And like that, I can, I don't even
know if I can get them open.
The thumb catch is really.
Oh, there we go.
Look at that.
So we're going to take these into
the studio and we're going to get
them all cleaned up when we're done
planting.
These were pretty new, too.
And look at these hydrangeas.
We've got 20 of them sitting here.
We estimated we would need between
15 and 20 to finish up
that flower bed.
They're wonderful.
And again, we got these from Jaker,
the wholesale nursery that we went
to the other day.
I brought you along for we were
hoping to find, you know, some.
I didn't expect to find 20 of one
variety of anything really at this
point of the year.
I'm so super happy to hear that
they could still order them in.
They got them in within a few days
and Paul went and grabbed them
yesterday. So anyway, that's
going to be our main project for
today. So let's get as many as we
can in the gator and head up to the
front. All right.
Hit my gloves on.
One thing about wearing gloves,
which I've been more dedicated about
doing this year so that my hands
weren't so torn up, that you
become very dependent on them.
That's why you don't see me wearing
sunglasses.
Most days I can get through without
sunglasses just fine.
I know it's not the best for my
eyes, but it's kind of a pain
that I'm so dependent on these
gloves now.
I think as you get older, you start
carrying, carrying a little
bit more.
When you start to see signs of
aging.
The best looking one right there.
Got them all to fit.
Yes.
OK.
So this is where they're all going
right in this empty spot.
So we'll have a pretty spectacular
display of hydrangeas up
here.
So hopefully 20 of them
should be plenty for this space.
What do they get, like six to eight
feet tall and wide, right?
Zone three through eight.
This is a guess.
I've talked about their stats so
many times this year.
Sometimes I just can't lock
it in, though.
They're a panicle type hydrangea,
which makes them the type
that bloom on new wood, which is
great if you've got like heavy
snow loads, which can potentially
break branches.
If you've got deer grazing, that
kind of thing, they will produce
blooms on the current year's
growth instead of setting buds on
past year's growth, which can
be harder to get them to bloom.
Yeah. Six to eight feet tall and
wide. Zone three through nine.
I was just a little bit off on
that, but the bloom start off
a very crisp, beautiful white
and then they age very quickly into
this pink.
It sounded really low.
And I really like the deep color
of their leaves.
They've got a very deep green and
it's got a little bit of a shine
to it. See that?
I love leaves with shine.
So I'm just going to try to space
these roughly the same distance
apart from one another.
All of these are spaced pretty
precise and they mirror the other
side over there.
So we're just going to try to
maintain spacing distance and
fill it in.
How many did you count?
Well, after we plant all these,
there'll be a total of thirty
eight between both sides.
Oh, my gosh.
It's gorgeous.
I think we've got these spaced out
as good as we can, given
the tree is kind of right in the
middle of all the things.
And we did plant this one to
match the other side.
But if we want to maintain sort of
the same spacing along the lane,
which I think is important, I
think we're going to dig that one
out.
It's really echoey right here.
Is it facing this way?
Is it this?
Is it echoing against that?
I don't know.
I don't know. Do you hear it?
Oh, yeah, I do.
Yeah.
It's got to be the millhouse.
Maybe. That's so weird.
I just haven't noticed that right
now.
I mean, or the other thing it could
be echoing is off of the brick.
That isn't maybe.
I don't know. Well, side note, I
don't know if you can hear it, but
it's definitely echoing.
Anyway, we're going to dig this
hydrangea up and put it right where
I scuffed up the dirt right there.
And I think we're going to be doing
something different right here.
We're going to move the lilac and
we're going to pop something else
with a little bit more weight right
in this space at some point.
All right. Let's take a look from
up front here.
Oh, yeah. Can you imagine
when these things are happier in the
ground than they are in containers
and they're all full of flower?
It's going to be just absolutely
spectacular.
Oh, I just can't wait to see it.
That side as well.
And this spot has been mulched.
We got it all mulched and all slicked
up so that during the October garden
tour, we could show you just how
beautiful this space was with that
top dress.
But I am getting ready to plant a
bunch of bulbs up here as well.
So I think we're just going to go
ahead and use the auger.
And when we're all done with all of
our planting up here, we'll come
back in with another just a fine
layer of mulch just to finish it off
again. Using the auger is just so
much faster than digging all the
holes in the shovel.
I think you want to use the auger,
Aaron, versus the shovels or do
you have a preference?
Well, you know, I mean, you said
you're going to go in and do bulbs.
Yeah. So if you're going to do that,
if you weren't going to do bulbs, I
would say we should use a shovel.
OK. To try not to be as messy.
But if you're about to do bulbs
and going to mess it up anyway.
We'll just mess it up.
OK. That makes me feel better.
If the auger even goes through the
dirt.
Goes through the soil. Yeah, I know.
It was getting easier, though.
Remember, as we made it this
direction.
Did you just bring one auger?
I brought one auger and three
batteries.
Oh, for pilot hole.
Might need a second one.
Yeah. The last time we planted
hydrangeas and boxes in here,
we had to use what, like the three
inch auger
to make a pilot hole through this
hard pan up here.
And then we'd bring the nine inch
in and it would get down far enough.
Maybe it was the five inch.
It might have been the one up from
the three. I think it was the five
inch that we were using.
Either way, it took two sets of
augers.
All right. So we're just going to
get all the holes dug, biotone
in each hole. I'm going to set each
one of them down in the hole before
I pack in with soil.
Just in case we need to shift
things. It's so helpful
to have them all kind of flexible
until the very end.
And then we can pack them down with
soil.
Pack them in with soil.
Whatever.
OK.
They're not all planted, but they're
all in the ground.
What do you think, Aaron?
I think it's going to look great.
Yeah.
It really is.
And I think the most important part
is the front line.
Those are all spaced properly.
When we moved that one out
and moved it back there, I think
it's great there.
But I do think that we're going
to shift or I'll shift this one over
a little bit and this one over a
little bit, just so that the gaps
are a little bit more filled up,
even though it won't mirror now this
side.
I think we're in it to win it with
the big math here.
Yeah. So to make them look like
they're all fairly similar is more
important at this point.
I'll bet, you know, as they start
to grow, you won't even notice.
Probably not.
Where they're planted.
You can see it now that they're
small. But, you know,
these kinds of shrubs, they grow
oftentimes in weird directions
anyway.
Right.
So I think if you're planting them
in mass.
So you don't think I need to shift
those?
I mean, that's up to you if it's
going to bother you.
I think it might.
I think it might bother me to look
down this way and see such a huge
gap when the rest of the gaps are
fairly small.
I don't know. I think it's they're
not rooted in right now.
Not very much anyway.
So I think it'll cause least the
least amount of pressure on the
plant if I just do it now.
Sure.
And I'll be happy with that.
So I'm going to go ahead and quick
shift those over a little bit
and then I'll
stand back again.
We'll take a look and then we'll
pack them in. Thank you for your
help with the digging.
You're welcome.
We did end up having to go get the
five inch auger to do some pilot
holes, but only on like less than
half of them, probably.
Yeah, it seems like the ones closer
to the driveway, for whatever
reason, the ground is just super
packed. And the farther you get out
this way, it's fine.
Yeah. It's like normal.
Easy. So I don't know why this is so
compact.
Not either.
We have two left over.
We've we used 18
of the 20 we got, which is nice to
have the two kind of in the wings
just in case we need to replace
one or two in the spring.
OK, so I'm going to shift these two
and then we'll plant them all when
I'm all done and they're all watered
in. We'll stand back again and take a
look. So pretty much the same
right now.
That actually made all the difference
to me to have those shifted a bit.
So we moved that one.
I left the hole open so you could see
it. It was there.
Moved it over just a little bit.
So it lines up with the second row
and then moved this one, which was
back here, just in a little bit to
fill in this gap here.
And then the one we already moved,
shifted it from where I thought it
was going to need to be over just a
little bit. They all moved roughly
the same amount, like maybe
18 to 24 inches.
Now it all looks cohesive and
beautiful. And I'm glad that we
went to the effort of doing that
before they rooted themselves in
anymore.
I think they'll be completely fine
with that shift.
Gosh, it's beautiful.
Also, you'll notice that we left
space, even though we could have fit
one at this point in time right here.
We left space for the evergreen to
grow pretty much all the way around.
And there's some space around that
one as well. OK, I said before I was
going to get them all planted first,
but I was just so thrilled with how
these shifted. I wanted you to see a
little bit closer up how that looked
with the old holes still
exposed. Now we'll plant.
OK, they're all done, planted,
watered in.
They look so good.
And, you know, the thing that was
making me real happy as I was kind of
walking around is that I realized
that we did a pretty good job of
lining these up as good as I think
we could have.
Like, you know, they kind of bounce
back and forth, with the exception of
this tree where we had to bump it to
the side a little bit.
But if you look down, you can see the
rows
right here.
And it's all pretty even until you
well, until you really just get to
this one. This is a little bit wonky,
but the rest of them all just
line up beautifully.
And like we were talking about
before, I don't think it's really
going to matter as long as your front
ones line up.
Everything else will just fill in.
And again, these little sticks right
here on either side. So there's one
there and
one right over here.
Those indicate where we're going to
put something, a very small
ornamental tree or something like
that, that's got some really
interesting architecture for
this location.
But this is stunning.
I love it.
So the last thing we're going to do
in here this fall is get some bulbs
planted and then remulch it.
And then we'll pick up next year and
do any refining things.
I think for at least the first one or
two seasons, we're going to have room
to do some annuals in between, which
will be really fun for a little bit
of extra color.
And then we'll just see.
OK, so now we're going to head back
to the studio and we're going to take
after those falcos.
I've got all of my cleaning
supplies in one of these drawers.
There they are.
I'll do my best to get as close as I
can while I'm doing this just to show
you the whole process.
But I'll show you all the stuff I'm
going to be using.
So I keep just this old towel in
here. It's just kind of a dedicated
focal cleaning towel.
OK, so these are all the things.
If you've got a lot of crud
on the blades, this
is the cleaner you want to use.
It's a resin remover.
And this is one that we're going to
as soon as we get all of the pieces
and parts apart,
we're going to spray them all down
with this and then we're going to
wait. I can't remember how long we
wait. Five minutes or ten minutes,
something like that, and let it just
sit there and then we'll do some
cleaning. I've got a wire brush here
that works real well. You can see
it's well, well used.
I also have some steel wool, which
works really nicely as well.
And then I will go in with some of
this 980 spray too.
This is a cleaner and it also
lubricates all the parts.
And then we've got a grease, which
we'll put it on in the very, very
end. The other two things, three
things we're going to use as a
sharpener right here.
I've got a flathead screwdriver
and then I've got a, I can't remember
the size of it.
Also, my fingers are kind of dyed
because Samantha and I were making
bubble dough and we used red food
coloring.
OK.
Let's see what size is this one.
Eight millimeter.
Anyway, that's what we're going to
be using. So let's take our felcos
apart first.
OK.
And you kind of want to keep track
of the parts as you take them off so
that you know what goes where.
I'm going to loosen, hopefully,
loosen this.
It is rusted.
There we go.
Movement here.
Oh, my goodness.
OK, so I'm going to take these off
and put them in order.
There's a little itty bitty washer.
You can see right there that goes
underneath the thumb catch.
Don't lose that.
Otherwise, it just doesn't work
properly.
OK, now.
We've got another screw in this
like little bear claw piece.
I don't know what all the proper
names are. I did it one time.
There's this little round
thing.
And we've got the catch plate
right there.
We'll take the spring out.
All that junk.
You can take the blades apart.
Oh, mercy.
OK, now we're going to go in with
our resin remover here and
I'm going to spray everything.
I need to go get myself another
bottle of this.
I'm almost out.
All right, so now that we've got
it sprayed, we're going to let it
set for 10 minutes.
OK, so these have been soaking for
10 minutes. So what we're going to
do is take our wire brush
and our steel wool and we're just
going to start in on each one of
these pieces, trying to make them
so far so good.
Grab a paper towel quick.
A little bit of the 980 spray.
Look at how much better that piece
looks.
All right, let's get after the
blade.
I'm going to spray this one again
with the 981 and let it soak.
That piece looks much better, too.
OK, it's not perfect, but it looks
so much better than it did.
It's really important if you're
using this resin remover cleaner to
make sure you've cleaned it off of
Every single part it's not something you want to let set on there forever as opposed to this one's kind of like more of your
Every day sort of cleaner, okay?
I'm gonna refold the towel so we've got a little bit of a cleaner surface
And then we will work on putting this all back together actually you know what we're just gonna scoot it down that works
Okay, so the first thing we're gonna. Do is take our big bolts right here and put it up through the bottom of this piece
It's labeled with a number one. I've never noticed that there before this label with a two
Hmm. I don't see a two on this one, but anyway
we'll put our blade on to where the little circles on it match those little black nubs and
Then we are going to before we put this piece on top. I'm gonna put a little bit of our grease in here
You don't need very much at all. It just kind of goes in this little well
right here
And then we'll lay that on top
Like so all right, so now we're gonna put on the rest of our pieces. We'll put the catch plate on first
We want to line up this hole with the hole on the handle
like that
Then we are gonna put this little wheel back on and don't tighten it all the way
There was still some moisture in the middle of that hold on. I'm gonna wipe that down
Now before we put on our bear claw and the screw on the other side we're gonna make sure that the
Blades are falling how they should and we can tighten or loosen right here
What we want to do is if we put our handle up and let it fall
That's right about where we want the connection to be made. It's about perfect
Right there, and then we'll put our bear claw on
and our screw
Yeah, beautiful
Okay, now we're gonna put our little washer back on and our thumb catch
And you don't want this one all the way tight either
You want to be able to have a little bit of flexibility not a tremendous amount, but we'll tighten this down again later
Okay, then we'll put our spring back on
Beautiful, but I do need to tighten this back up a bit
Probably don't need to sharpen it at this point
But if you are gonna sharpen it
How I like to hold it is like this and then you take your sharpener and you hold it
Kind of at an angle like that and just roll it alongside kind of that beveled edge right there
And you start at the bottom and go all the way to the top
I'm not gonna continue to do it because these are fairly new like I said and they're sharp at this point still
No need to wear the blade down. These look so good
So much better than they did I cannot believe they spent as many nights outside as they did
I was looking at a lot of the other pair of Falcos that we have around here, too
And a lot of them need to have some serious attention because like look at this I can open this thumb catch
The blades won't even open I have to physically make them open because these are so
So so dirty and you know they get that way when you use them a lot every single day through the entire gardening season
Sometimes I'll come in midsummer and do a kind of a quick clean on them and once you get into the rhythm of
Cleaning them, and you've done it a few times. It's just
it's almost like a
Therapeutic tour because you get something so great at the end of it
And it's also nice to have a little kit
And it's like that with everything to have all the tools and the things that you need for a specific project in a specific spot
They're always living there. You know where to find them, and you don't have to go searching for stuff
It makes it a super quick process. I did go grab a paper towel
So that was one extra thing that I used look at that
And the paper towel too boy
We got a lot of junk off these and you guys that is gonna do it for today's video
Bunch of beautiful hydrangeas in the ground can't wait to see what that does next year and a brand new clean pair of
Both satisfying projects, so thank you so much for watching. I hope you enjoyed it, and we will see you in the next one. Bye
