(الجزء الأول) تجميع محرك 125 #vw Assembly of the Volkswagen Touran 125 KW engine #KasemAutoservice

Of course, guys, these are original. These are original. After we install them, we have to put these brackets. They make a gap. They cancel the gap between the grunts. They make a gap between the grunts. They make a gap. We install one here and one here. We put the adhesive material and the brackets. We put them and fix them here. Of course, we must not forget that this is the outer bracket. The other side is not installed in the opposite direction. Here, it is installed in the opposite direction. The outer bracket must be like this. Okay? Now, we put the grunt. It's okay now. We install the grunt. I don't know what you call it. This is the second one. Of course, these are numbered. One, two, three, four, five. You can't change their numbers by mistake. You have to install them by number. Number one is the first type. Okay, guys? We put one here. Okay, guys. This is number two. The second one is here. We must put the best one. Everywhere is oil. This is number four. I will install the third one at the end. Because it has thickness. This is number five. We put it here. Like this. We put it in the middle. We put some oil. This is number five. This is number six. This is number three. It has thickness. Of course, the grunt must be outside. Like this. This is here. We do like this. The grunt must be here. Like this. Okay. We tighten it by the watch. Okay. We measure it by the watch. And we're done. We tighten it by the watch. We measure it by the watch. 75. Okay. We check the middle. One. Okay. It must be like a dessert. Okay. We finished the first part of the video. Tomorrow, we will make the second part. We will assemble the engine and upload the videos. God bless you.