Flightgear F14 Aircraft Carrier Start and Landing Tutorial

Fighter Aircraft
2 followers
Nov 5, 2025
Comments are disabled for this video.
Hello and welcome to another Flightgear video. Today I will show you how to take off with a
Grumman F-14 from an aircraft carrier and I will also try to land on the same aircraft carrier
and I will explain to you how that is normally done and how to navigate around the aircraft
carrier using the TACAN system of the F-14. So I've paused the Flightgear simulation. Now we
restart it. So the first thing we do is we check the fuel. It shouldn't be too much and not too
little, just for a little go around. 7,000 pre-configured, that should do. Then we go into
the model view and there are some things we have to prepare before we can actually take off.
The first thing we try is to fold the wings to make sure that this really works with the
minor sign on your keyboard. You can activate this manually and with the equation you can unfold them
again. The next thing we're using some flaps. I will show you the flaps indicator in the cockpit
as well. Then we activate the launch bar. It's a capital L on your keyboard, so capital Lima.
As you can see it folds up the blast shield and now the front wheel is also locked into that
slide that will catapult us out to the sea once we activate it with a capital C,
with a capital Charlie later. So let's get familiar with the most important things in
the cockpit. First of all to use the TACAN we want to get some orientation where is the aircraft
carrier in fact to find it again. So here in the HUD we have the distance indicator for the TACAN
and here this little triangle indicates the direction in which we have to fly to actually
find our aircraft carrier again. We have to make sure that we are on the right TACAN frequency.
We are now on the USS Vinson and the TACAN frequency is 029 X-ray. So we have to make
sure that X-ray is pre-selected otherwise we will not find the aircraft carrier. This is the TACAN
frequency 029 and X-ray is pre-selected, that's correct. And also you have to make sure that in
this dial here the arrow points to Tango slash Romeo and not to any of the other ones. If that
doesn't, if it is not dialed to TR and you cannot dial it back you have to restart, you have to
reset the flight and then it will be correct. So that's what you need to do to actually use the
TACAN in the cockpit. If you don't get it done then you still have as a workaround you can use
the map and when you activate traffic you see your aircraft carrier and then you can use the map for
example you can make it transparent push it into the edge of your cockpit so that it doesn't bother
you and then you use the map. It's a little bit of cheating so it's more realistic for real pilots.
Top Gun, Tom Cruise, the TACAN would be the first choice. So what we're going to do now
flaps. We don't use full flaps for takeoff that would cause too much drag so we go to
quite high flaps position but not full flaps. And this is the hook, this is the hook indicator.
We need it later to actually grab one of those four cables. Maybe I can show you the cables before
Here in the landing zone there are the four cables and we have to grab one of those four
with our hook. We will now activate the hook. It's with a minor O Oscar
and also with Oscar on your keyboard you retract it again. That's what you need as a preparation
to get a grip on your aircraft carrier when landing.
So what comes also very handy in case you don't want to do everything manually
is the auto throttle here. There's a little bit of auto throttle and now let's see where it is.
This is it. Throttle mode and with a CTRL Sierra you can sort of freeze your current speed.
So what you need for approach for final approach is something around 180 knots and once you've
slowed down to 180 knots you just press CTRL S on your keyboard and that will activate this
little switch and switch it to on and then you're on auto throttle. You can also check by
using your throttle, give full throttle and it should not react to that. So the thrust levers
should go back to idle position and still the machine gives you enough thrust to maintain
your current speed and this speed for landing should be 180 knots. So if you have problem with
speed management on short final when approaching your carrier try the CTRL S
to freeze your current speed. That will stabilize the plane significantly and it makes sure that you
don't overshoot the runway or actually go down before you have reached the carrier runway.
So I think we're ready to go. The TACAN is ready. Let's check again the fuel. If we haven't
used up too much now by standing around but I think it should still be enough. We're just
making a little go around. So we are ready to go. We give full throttle and then with a capital C,
capital Charlie, we activate the catapult. Full throttle. Look at the nice afterburners
and then with a capital C off we go and let's retract the gear immediately and also flaps
Here you have the flaps indicator and now we're on flaps position zero. So now we do a little
curve immediately. Make sure that your speed does not drop below 200 knots otherwise you're
in risk of stalling. And now we go back again to actually do a flyby on our carrier.
We are now way too slow so we have to pick up speed. With the F-14 doing a turn will
slow you down quite clearly and you always have to maintain your speed not to stall in the F-14.
That's one of the downsides of this otherwise very nicely modeled plane. Look at the cockpit
and also the co-pilot cockpit. It is beautifully made. It is almost complete. It's really a
pleasure flying this plane. I think it's one of the best fighter airplanes in flight gear.
It's really a pleasure to operate this piece of flying equipment. So what we try to do now.
Now we're flying straight away from our carrier. We've just flown over it. We look at the TACAN.
At around six miles out we could make our turnaround to fly back to the carrier
and to attempt the landing. Now as you can see the triangle here, this little triangle,
indicating the carrier's position. It's at 180 degrees, means it's on six o'clock. So we're
flying straight away from the carrier. That's what we want. Also to get the correct vector later when
we re-approach our carrier. We're now four miles out. So still a little bit to go. That gives us
more time, once we've done the turnaround, gives us more time to prepare for the touchdown. We have
to do quite some things to prepare the touchdown. So let's give us enough time to do that. So we
don't fly with afterburners because that eats up too much fuel. We can take away the task bar.
So no afterburners. We're not flying supersonic now. It's not necessary for what we're trying to
do. So we're on seven miles out. Now we can do the turnaround. And the turnaround will also help us
lose a lot of speed because we should not be too fast when we re-approach our carrier.
Now we give full throttle with afterburners. Not to get too slow. Trying to go around here
until we have this little triangle in the TACAN display on 360 degrees. Now we're on
360 and now we're on our way back. So we use the flaps already because we shouldn't extend them
while the speed is too high. Otherwise we get a warning that's not good for the plane. And we also
extract the hook with a lowercase oscar. So the hook doesn't harm us much. It doesn't have much
influence on the aerodynamics yet. So what we try now, we extend the flaps even more and then use
CTRL-S to freeze the current speed. 184 knots. That would be okay for a touchdown attempt. 184.
I think we will lose some more speed once we have extended the gear. And there I can already see
very small on the horizon the carrier. So we can already extend the gear. You can see this is the
lever. So let me extend the gear. See it goes down. Okay. Let's always watch the speed indicator.
Should be something around 180. Then you're good to go. 180. 190. That would still be okay. 185.
That's very nice. Let's have a look if everything is extended. Gear. Full flaps. And the hook.
That's what we need. And I've activated this. Here you can see we're on full flaps. And I've activated
the auto throttle to freeze the speed at around 180 knots. What we have to do now is the most
important thing. We have to get the vector right. The landing strip on the carrier is not exactly
straight in the direction of the ship's body. It goes a little bit from right to left. So we have
to approach from the right. Have to fly a little turn. And in the end you need to use the rudder
for fine-tuning. Now I'm only using ailerons to align with the runway. And in the final sequence
then I will also use the rudder for fine-tuning to make sure I grab one of those four cables.
So you can see the so-called meatball. That's the height indicator. This red and green
ball on the carrier. It indicates if I'm too high or too low. If I see red and green
it's all good. I can already see the cables. It looks all good. So, so, so. Here it comes.
Stop. And we made it. So we activate the parking brake. That was a close one.
So I was maybe a little bit too fast. But as you can see we made it successfully.
So we retract the flaps. We retract the hook. And we can now fold the
wings to make the plane more compact to get to some kind of parking position.
You have to press the smaller key on your keyboard many times to completely fold the
wings. And now you can even do some taxiing here. There are those elevators. They can be operated.
And yeah, you can, when you release the parking brake, you could use the front gear.
So that you could use the tiller just to steer to over there. To use the elevator to get into
the ship's body. It is, it is completely animated. You can really do that. So there is the,
uh, it's not multiplayer. Let me see. Time cap controls. No. Multiplayer.
Carrier controls. That's, this is it. So if you really want to do that, just to celebrate your
successful landing, this is a little extra that you have here. You just go to this,
to this elevator. Make sure you come with the right angle. And we will stop right before it.
Not to fall down a little more. And there you activate the parking brake. And then you can
operate the deck elevators. We get into a little conflict with this F-18.
Because that's part of the animation. And now you can see the elevator coming up.
It is very slow, of course. And once it is completely up, you can roll on that elevator.
Deactivate operate deck elevators. And it will go down again. It can actually roll into the hangar.
And that's very nicely animated. And you can have a look around in the hangar. So that takes too
much time to show you now. I don't want to bore you with this sequence. Just a little hint. So,
this is it for today. I hope you enjoyed the video. See you again next time. Goodbye.
