
KasemAutoservice
15 followers
#معلومات #مفيدة #وهامة
فك قفل وبرمجة بالون سيارة رينو كود عطل (DF034)
Renault airbag programming
DF034 Comp. Locked,Locked By Fault Finding Tool
#KasemAutoservice #df034 #air #bag #renault #engine #mercedes #bmw #timing #mechanical #mechanisch #mekanik #new #maintenance #ford
Peace be upon you, guys. A guy asked me how to
unlock the
airbag.
The car is running
perfectly fine; the airbag light and service light are on here. The
car is a
2004 Renault Clio. Luckily, I got the same car. The guy who
asked me how to unlock it, this light is on here. I
put the check engine light here on the system. Let's
do a general scan. I'll give you an explanation of the code. Let it
scan the whole
car.
[Music]
This code appears in Renaults in general,
especially older models, when you make any modifications to
the engine or electrical system. The
airbag computer shuts down to prevent it from opening, being pulled over,
exploding, or malfunctioning. So, every time you service it,
if this light appears, you
absolutely must unlock it here or
reprogram it. It's important that you access
the system and unlock it again from scratch for it to
work correctly. Now I'll show you how to do it practically. This is the
guy who asked me. I don't know the method, so I'll give
you a full explanation. Let him finish the test. Now,
here in the engine, we also got a quotation from the
ECM, but this quotation is related to the airbag. So,
when the airbag is working properly, the
airbag light and the servo light should go off together.
These two lights are on, right? These lights will go off. Let him finish the test.
We have the airbag. There are three
engine faults. Of course, these are all related.
Let him finish. It
will take a while. I'll close and
open it again. The search is over. Now, look, give me here the quotation in
the engine, the airbag code, the
C code. These codes all share
one main code, which is what we will work on.
For example, this code for the IC is all
connected to the ERC, and they are all shared.
Okay, the same thing applies to the ERC. Okay, and we'll come back to you
again. Okay, and here the airbag also has a
quotation, but the code that concerns us and is the main
one is this code. Remember it.
Komoko, the computer is fine, this is the
basic code, the rest are all shared, of course. We go to the "arbaak" section, then to the "unlock" section, then to the "settings" section. We
scroll down, and
there you have "lock
computer" and "
unlock computer." So what do we need? We need to unlock the computer. The company has set these
settings so that before you do any electrical or
mechanical work on the car, you have to lock it.
After you finish your work, you have to unlock it again. What are they doing? They're
working on the car's electrical system. After they've
worked on the car, what happens here? The
computer automatically locks. Once you finish your work, you
unlock it again. That's all it is. You
just enter it and it says "unlocked," meaning the car is
ready. The light will go off.
You see, it
will turn off
the car. Open the ignition.
Work
is finished. That's it. We hope you
benefited from the video. May God
bless you. Please like, share, and follow us.
Thank you very much.
